lkml.org 
[lkml]   [2019]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] PCI: pciehp: Do not disable interrupt twice on suspend
Date
We try to keep PCIe hotplug ports runtime suspended when entering system
suspend. Due to the fact that the PCIe portdrv sets NEVER_SKIP driver PM
flag the PM core always calls system suspend/resume hooks even if the
device is left runtime suspended. Since PCIe hotplug driver re-uses the
same function for both it ends up disabling hotplug interrupt twice and
the second time following is printed:

pciehp 0000:03:01.0:pcie204: pcie_do_write_cmd: no response from device

Prevent this from happening by checking whether the device is already
runtime suspended when system suspend hook is called.

Fixes: 9c62f0bfb832 ("PCI: pciehp: Implement runtime PM callbacks")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
No changes from previous version.

drivers/pci/hotplug/pciehp_core.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index b3122c151b80..56daad828c9e 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -253,7 +253,7 @@ static bool pme_is_native(struct pcie_device *dev)
return pcie_ports_native || host->native_pme;
}

-static int pciehp_suspend(struct pcie_device *dev)
+static void pciehp_disable_interrupt(struct pcie_device *dev)
{
/*
* Disable hotplug interrupt so that it does not trigger
@@ -261,7 +261,19 @@ static int pciehp_suspend(struct pcie_device *dev)
*/
if (pme_is_native(dev))
pcie_disable_interrupt(get_service_data(dev));
+}

+#ifdef CONFIG_PM_SLEEP
+static int pciehp_suspend(struct pcie_device *dev)
+{
+ /*
+ * If the port is already runtime suspended we can keep it that
+ * way.
+ */
+ if (dev_pm_smart_suspend_and_suspended(&dev->port->dev))
+ return 0;
+
+ pciehp_disable_interrupt(dev);
return 0;
}

@@ -279,6 +291,7 @@ static int pciehp_resume_noirq(struct pcie_device *dev)

return 0;
}
+#endif

static int pciehp_resume(struct pcie_device *dev)
{
@@ -292,6 +305,12 @@ static int pciehp_resume(struct pcie_device *dev)
return 0;
}

+static int pciehp_runtime_suspend(struct pcie_device *dev)
+{
+ pciehp_disable_interrupt(dev);
+ return 0;
+}
+
static int pciehp_runtime_resume(struct pcie_device *dev)
{
struct controller *ctrl = get_service_data(dev);
@@ -318,10 +337,12 @@ static struct pcie_port_service_driver hpdriver_portdrv = {
.remove = pciehp_remove,

#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
.suspend = pciehp_suspend,
.resume_noirq = pciehp_resume_noirq,
.resume = pciehp_resume,
- .runtime_suspend = pciehp_suspend,
+#endif
+ .runtime_suspend = pciehp_runtime_suspend,
.runtime_resume = pciehp_runtime_resume,
#endif /* PM */
};
--
2.23.0
\
 
 \ /
  Last update: 2019-10-29 18:01    [W:0.121 / U:0.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site