lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 1/6] dt-bindings: mfd: max77650: convert the binding document to yaml
śr., 16 paź 2019 o 15:51 Rob Herring <robh+dt@kernel.org> napisał(a):
>
> On Wed, Oct 16, 2019 at 7:55 AM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
> >
> > wt., 15 paź 2019 o 23:17 Rob Herring <robh+dt@kernel.org> napisał(a):
> > >
> > > On Tue, Oct 15, 2019 at 11:23 AM Bartosz Golaszewski <brgl@bgdev.pl> wrote:
> > > >
> > > > From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > > >
> > > > Convert the binding document for MAX77650 core MFD module to YAML.
> > > >
> > > > Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > > > ---
> > > > .../devicetree/bindings/mfd/max77650.txt | 47 +----------
> > > > .../devicetree/bindings/mfd/max77650.yaml | 83 +++++++++++++++++++
> > > > 2 files changed, 84 insertions(+), 46 deletions(-)
> > > > create mode 100644 Documentation/devicetree/bindings/mfd/max77650.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt b/Documentation/devicetree/bindings/mfd/max77650.txt
> > > > index b529d8d19335..080871686b3b 100644
> > > > --- a/Documentation/devicetree/bindings/mfd/max77650.txt
> > > > +++ b/Documentation/devicetree/bindings/mfd/max77650.txt
> > > > @@ -1,46 +1 @@
> > > > -MAX77650 ultra low-power PMIC from Maxim Integrated.
> > > > -
> > > > -Required properties:
> > > > --------------------
> > > > -- compatible: Must be "maxim,max77650"
> > > > -- reg: I2C device address.
> > > > -- interrupts: The interrupt on the parent the controller is
> > > > - connected to.
> > > > -- interrupt-controller: Marks the device node as an interrupt controller.
> > > > -- #interrupt-cells: Must be <2>.
> > > > -
> > > > -- gpio-controller: Marks the device node as a gpio controller.
> > > > -- #gpio-cells: Must be <2>. The first cell is the pin number and
> > > > - the second cell is used to specify the gpio active
> > > > - state.
> > > > -
> > > > -Optional properties:
> > > > ---------------------
> > > > -gpio-line-names: Single string containing the name of the GPIO line.
> > > > -
> > > > -The GPIO-controller module is represented as part of the top-level PMIC
> > > > -node. The device exposes a single GPIO line.
> > > > -
> > > > -For device-tree bindings of other sub-modules (regulator, power supply,
> > > > -LEDs and onkey) refer to the binding documents under the respective
> > > > -sub-system directories.
> > > > -
> > > > -For more details on GPIO bindings, please refer to the generic GPIO DT
> > > > -binding document <devicetree/bindings/gpio/gpio.txt>.
> > > > -
> > > > -Example:
> > > > ---------
> > > > -
> > > > - pmic@48 {
> > > > - compatible = "maxim,max77650";
> > > > - reg = <0x48>;
> > > > -
> > > > - interrupt-controller;
> > > > - interrupt-parent = <&gpio2>;
> > > > - #interrupt-cells = <2>;
> > > > - interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> > > > -
> > > > - gpio-controller;
> > > > - #gpio-cells = <2>;
> > > > - gpio-line-names = "max77650-charger";
> > > > - };
> > > > +This file has been moved to max77650.yaml.
> > > > diff --git a/Documentation/devicetree/bindings/mfd/max77650.yaml b/Documentation/devicetree/bindings/mfd/max77650.yaml
> > > > new file mode 100644
> > > > index 000000000000..5186ad287ec7
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/mfd/max77650.yaml
> > > > @@ -0,0 +1,83 @@
> > > > +# SPDX-License-Identifier: GPL-2.0
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/mfd/max77650.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: MAX77650 ultra low-power PMIC from Maxim Integrated.
> > > > +
> > > > +maintainers:
> > > > + - Bartosz Golaszewski <bgolaszewski@baylibre.com>
> > > > +
> > > > +description: |
> > > > + This document describes the DT properties of the core MFD controller.
> > > > +
> > > > + The GPIO-controller module is represented as part of the top-level PMIC
> > > > + node. The device exposes a single GPIO line.
> > > > +
> > > > + For device-tree bindings of other sub-modules (regulator, power supply,
> > > > + LEDs and onkey) refer to the binding documents under the respective
> > > > + sub-system directories.
> > > > +
> > > > + For more details on GPIO bindings, please refer to the generic GPIO DT
> > > > + binding document <devicetree/bindings/gpio/gpio.txt>.
> > > > +
> > > > +properties:
> > > > + compatible:
> > > > + const: maxim,max77650
> > > > +
> > > > + reg:
> > > > + description:
> > > > + I2C device address.
> > > > + maxItems: 1
> > > > +
> > > > + interrupts:
> > > > + description:
> > > > + The interrupt on the parent the controller is connected to.
> > > > + maxItems: 1
> > > > +
> > > > + interrupt-controller: true
> > > > +
> > > > + "#interrupt-cells":
> > > > + const: 2
> > > > + description:
> > > > + The first cell is the IRQ number, the second cell is the trigger type.
> > > > +
> > > > + gpio-controller: true
> > > > +
> > > > + "#gpio-cells":
> > > > + const: 2
> > > > + description:
> > > > + The first cell is the pin number and the second cell is used to specify
> > > > + the gpio active state.
> > > > +
> > > > + gpio-line-names:
> > > > + $ref: '/schemas/types.yaml#/definitions/string-array'
> > > > + maxItems: 1
> > > > + description:
> > > > + Single string containing the name of the GPIO line.
> > > > +
> > > > +required:
> > > > + - compatible
> > > > + - reg
> > > > + - interrupts
> > > > + - interrupt-controller
> > > > + - "#interrupt-cells"
> > > > + - gpio-controller
> > > > + - "#gpio-cells"
> > > > +
> > > > +examples:
> > > > + - |
> > > > + pmic@48 {
> > > > + compatible = "maxim,max77650";
> > > > + reg = <0x48>;
> > > > +
> > > > + interrupt-controller;
> > > > + interrupt-parent = <&gpio2>;
> > > > + #interrupt-cells = <2>;
> > > > + interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> > >
> > > Examples are built now. Run 'make dt_binding_check' on bindings before
> > > sending them:
> > >
> > > Error: Documentation/devicetree/bindings/mfd/max77650.example.dts:24.29-30
> > > syntax error
> > > FATAL ERROR: Unable to parse input tree
> > > scripts/Makefile.lib:321: recipe for target
> > > 'Documentation/devicetree/bindings/mfd/max77650.example.dt.yaml'
> > > failed
> > > make[1]: *** [Documentation/devicetree/bindings/mfd/max77650.example.dt.yaml]
> > > Error 1
> > >
> > > You need to include any includes that you use.
> > >
> > > Rob
> >
> > Hi Rob,
> >
> > thanks for the review.
> >
> > I'm on v5.4-rc3 and when running dt_binding_check, the error I'm
> > getting is this:
> >
> > # make dt_binding_check
> > DT_SCHEMA_FILES=Documentation/devicetree/bindings/mfd/max77650.yaml
> > SCHEMA Documentation/devicetree/bindings/processed-schema.yaml
> > CHKDT Documentation/devicetree/bindings/mfd/max77650.yaml
> > make[1]: *** No rule to make target
> > 'Documentation/devicetree/bindings/mfd/max77650.example.dt.yaml',
> > needed by '__build'. Stop.
> > make: *** [Makefile:1263: dt_binding_check] Error 2
> >
> > Is this caused by the same issue or am I missing something?
>
> I believe that's because dtc needs to be built with libyaml support.
>

Indeed, I didn't have the development package installed, but
surprisingly I didn't get the warning from scripts/dtc/Makefile about
that either.

Bart

> Rob

\
 
 \ /
  Last update: 2019-10-16 17:30    [W:0.060 / U:3.840 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site