lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 05/10] ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path'
Date
From: Frieder Schrempf <frieder.schrempf@kontron.de>

The Kontron N6x1x SoMs all use uart4 as a debug serial interface.
Therefore we set in the 'chosen' node.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index ba50c2966998..e8e44fb2afc5 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -7,6 +7,12 @@

#include <dt-bindings/gpio/gpio.h>

+/ {
+ chosen {
+ stdout-path = &uart4;
+ };
+};
+
&ecspi2 {
cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
--
2.17.1
\
 
 \ /
  Last update: 2019-10-16 17:08    [W:0.136 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site