lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 06/10] ARM: dts: imx6ul-kontron-n6x1x-s: Specify bus-width for SD card and eMMC
Date
From: Frieder Schrempf <frieder.schrempf@kontron.de>

Both, the SD card and the eMMC are connected to the usdhc controller
by four data lines. Therefore we set 'bus-width = <4>' for both
interfaces.

Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
index 08a326ce2cbe..779d75f42268 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -207,6 +207,7 @@
wakeup-source;
vmmc-supply = <&reg_3v3>;
voltage-ranges = <3300 3300>;
+ bus-width = <4>;
no-1-8-v;
status = "okay";
};
@@ -221,6 +222,7 @@
wakeup-source;
vmmc-supply = <&reg_3v3>;
voltage-ranges = <3300 3300>;
+ bus-width = <4>;
no-1-8-v;
status = "okay";
};
--
2.17.1
\
 
 \ /
  Last update: 2019-10-16 17:08    [W:0.154 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site