lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 4/4] clocksource/drivers/renesas-ostm: Use unique device name instead of ostm
Date
Currently all OSTM devices are called "ostm", also in kernel messages.

As there can be multiple instances in an SoC, this can confuse the user.
Hence construct a unique name from the DT node name, like is done for
platform devices.

On RSK+RZA1, the boot log changes like:

-clocksource: ostm: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns
+clocksource: timer@fcfec000: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 57352151442 ns
sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 64440619504ns
-ostm: used for clocksource
-ostm: used for clock events
+/soc/timer@fcfec000: used for clocksource
+/soc/timer@fcfec400: used for clock events
...
-clocksource: Switched to clocksource ostm
+clocksource: Switched to clocksource timer@fcfec000

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v4:
- Rebase on top of timer_of conversion, and use np->full_name or %pOF,
like the timer-of core does,

v3:
- Make the name format similar to the one used for platform devices,
- Use kasprintf() instead of buffer size guessing,
- Use a real example from rskrza1.

v2 (by Jacopo):
- Use np->fullname.
---
drivers/clocksource/renesas-ostm.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/clocksource/renesas-ostm.c b/drivers/clocksource/renesas-ostm.c
index 46012d905604bc43..3d06ba66008c7029 100644
--- a/drivers/clocksource/renesas-ostm.c
+++ b/drivers/clocksource/renesas-ostm.c
@@ -64,9 +64,9 @@ static int __init ostm_init_clksrc(struct timer_of *to)
writeb(CTL_FREERUN, timer_of_base(to) + OSTM_CTL);
writeb(TS, timer_of_base(to) + OSTM_TS);

- return clocksource_mmio_init(timer_of_base(to) + OSTM_CNT, "ostm",
- timer_of_rate(to), 300, 32,
- clocksource_mmio_readl_up);
+ return clocksource_mmio_init(timer_of_base(to) + OSTM_CNT,
+ to->np->full_name, timer_of_rate(to), 300,
+ 32, clocksource_mmio_readl_up);
}

static u64 notrace ostm_read_sched_clock(void)
@@ -190,13 +190,13 @@ static int __init ostm_init(struct device_node *np)
goto err_cleanup;

ostm_init_sched_clock(to);
- pr_info("ostm: used for clocksource\n");
+ pr_info("%pOF: used for clocksource\n", np);
} else {
ret = ostm_init_clkevt(to);
if (ret)
goto err_cleanup;

- pr_info("ostm: used for clock events\n");
+ pr_info("%pOF: used for clock events\n", np);
}

return 0;
--
2.17.1
\
 
 \ /
  Last update: 2019-10-16 16:48    [W:0.089 / U:1.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site