lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH V4 2/3] dt-bindings: Add Logic PD Type 28 display panel
On Wed, Oct 16, 2019 at 8:15 AM Rob Herring <robh@kernel.org> wrote:
>
> On Tue, Oct 15, 2019 at 6:04 PM Adam Ford <aford173@gmail.com> wrote:
> >
> > On Wed, Oct 9, 2019 at 6:31 PM Rob Herring <robh@kernel.org> wrote:
> > >
> > > On Tue, Oct 01, 2019 at 06:39:22PM -0500, Adam Ford wrote:
> > > > This patch adds documentation of device tree bindings for the WVGA panel
> > > > Logic PD Type 28 display.
> > > >
> > > > Signed-off-by: Adam Ford <aford173@gmail.com>
> > > > ---
> > > > V4: Update per Rob H's suggestions and copy other panel yaml example from 5.4-rc1
> > > > V3: Correct build errors from 'make dt_binding_check'
> > >
> > > The example still fails to build here.
> >
> > I cannot replicate the build error on 5.4-RC3 at least for this
> > binding on V4 of the patch. I get build error on other bindings.
> >
> > $ make dt_binding_check ARCH=arm
> > scripts/kconfig/conf --syncconfig Kconfig
> > SCHEMA Documentation/devicetree/bindings/processed-schema.yaml
> > /home/aford/src/linux/Documentation/devicetree/bindings/net/adi,adin.yaml:
> > ignoring, error in schema 'adi,rx-internal-delay-ps'
> > warning: no schema found in file:
> > Documentation/devicetree/bindings/net/adi,adin.yaml
> > /home/aford/src/linux/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml:
> > ignoring, error in schema '0'
> > warning: no schema found in file:
> > Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
> > CHKDT Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
> > ....
> > CHKDT Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
> > CHKDT Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml
> > CHKDT Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
> > CHKDT Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
> > ...
> > CHKDT Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
> > CHKDT Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
> > Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml:
> > $id: path/filename 'arm/allwinner,sun4i-a10-csi.yaml' doesn't match
> > actual filename
> > Documentation/devicetree/bindings/Makefile:12: recipe for target
> > 'Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.example.dts'
> > failed
> > make[1]: *** [Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.example.dts]
> > Error 1
> > Makefile:1263: recipe for target 'dt_binding_check' failed
> > make: *** [dt_binding_check] Error 2
> >
> >
> > I took out some of the logs to make it less chatty. I don't know
> > anything about yaml or what the expectations are, so if there is a
> > test beyond 'make dt_binding_check' please let me know.
>
> Perhaps 'make -k' is needed because of the other failures. Or try on
> top of linux-next which should all be fixed.

Thanks. I didn't know about the '-k' I replaced GPIO_ACTIVE_HIGH
with 0 and it seems to have fixed the error.
Sorry about all the noise. Hopefully I did it right. There is a V5
patch waiting now starting at [1]

[1] - https://patchwork.kernel.org/patch/11193399/

adam




>
> Rob

\
 
 \ /
  Last update: 2019-10-16 15:56    [W:0.041 / U:1.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site