lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Patch 1/3] dt-bindings: media: ti-vpe: Document VPE driver
Rob Herring <robh@kernel.org> wrote on Tue [2019-Oct-15 17:29:47 -0500]:
> On Wed, Oct 09, 2019 at 12:56:26PM -0500, Benoit Parrot wrote:
> > Device Tree bindings for the Video Processing Engine (VPE) driver.
> >
> > Signed-off-by: Benoit Parrot <bparrot@ti.com>
> > ---
> > .../devicetree/bindings/media/ti-vpe.txt | 48 +++++++++++++++++++
> > MAINTAINERS | 1 +
> > 2 files changed, 49 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/ti-vpe.txt
>
> Please convert to DT schema format.

I can do that.
Before posting/merging a .yaml, are we supposed to be able to pass these?
# make dt_binding_check
# make dtbs_check

Because currently with 5.4-rc3 these fails.

Is there a way to run these "test command" target a specific .yaml and not
the whole set?

>
> >
> > diff --git a/Documentation/devicetree/bindings/media/ti-vpe.txt b/Documentation/devicetree/bindings/media/ti-vpe.txt
> > new file mode 100644
> > index 000000000000..b2942fa8c3ea
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/ti-vpe.txt
> > @@ -0,0 +1,48 @@
> > +Texas Instruments DRA7x VIDEO PROCESSING ENGINE (VPE)
> > +------------------------------------------------------
> > +
> > +The Video Processing Engine (VPE) is a key component for image post
> > +processing applications. VPE consist of a single memory to memory
> > +path which can perform chroma up/down sampling, deinterlacing,
> > +scaling and color space conversion.
> > +
> > +Required properties:
> > +- compatible: must be "ti,vpe"
>
> Needs to have SoC specific compatibles.

Yes, I'll fix that.

>
> > +- reg: physical base address and length of the registers set for the 4
> > + memory regions required;
> > +- reg-names: name associated with the memory regions described is <reg>;
>
> The names need to be documented.

Ok.

>
> > +- interrupts: should contain IRQ line for VPE;
> > +
> > +Example:
> > +
> > + target-module@1d0010 { /* 0x489d0000, ap 27 30.0 */
> > + compatible = "ti,sysc-omap4", "ti,sysc";
> > + reg = <0x1d0010 0x4>;
> > + reg-names = "sysc";
> > + ti,sysc-midle = <SYSC_IDLE_FORCE>,
> > + <SYSC_IDLE_NO>,
> > + <SYSC_IDLE_SMART>;
> > + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> > + <SYSC_IDLE_NO>,
> > + <SYSC_IDLE_SMART>;
> > + clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
> > + clock-names = "fck";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x0 0x1d0000 0x10000>;
>
> All this is outside the scope of this binding.

OK I was not sure if the whole interconnect thing was needed in the example
or not.

>
> > +
> > + vpe: vpe@0 {
> > + compatible = "ti,vpe";
> > + reg = <0x0000 0x120>,
> > + <0x0700 0x80>,
> > + <0x5700 0x18>,
> > + <0xd000 0x400>;
> > + reg-names = "vpe_top",
> > + "sc",
> > + "csc",
> > + "vpdma";
> > + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
>
> > + #address-cells = <1>;
> > + #size-cells = <0>;
>
> Not documented, nor needed as there are no child nodes.

Yeah, I'll remove that.

>
> > + };
> > + };
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 8598f49fa2c8..63dcda51f8ae 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -16299,6 +16299,7 @@ W: http://linuxtv.org/
> > Q: http://patchwork.linuxtv.org/project/linux-media/list/
> > S: Maintained
> > F: drivers/media/platform/ti-vpe/
> > +F: Documentation/devicetree/bindings/media/ti-vpe.txt

Now with the dt_schemas, I noticed that the maintainer's name is part of
the yaml file. Do we still need to add this to the MAINTAINERS file as
well?

Benoit


> >
> > TI WILINK WIRELESS DRIVERS
> > L: linux-wireless@vger.kernel.org
> > --
> > 2.17.1
> >

\
 
 \ /
  Last update: 2019-10-16 15:21    [W:0.120 / U:2.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site