lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] iio: adc: max9611: Defer probe on POR read
Date
The max9611 driver tests communications with the chip by reading the die
temperature during the probe function. If the temperature register
POR (power-on reset) value is returned from the test read, defer probe to
give the chip a bit more time to properly exit from reset.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

---
Geert,
I've not been able to reproduce the issue on my boards (M3-N
Salvator-XS and M3-W Salvator-X). As you reported the issue you might be
able to reproduce it, could you please test this?

Also, I opted for deferring probe instead of arbitrary repeat the
temperature read. What's your opinion?

Thanks
j
---
drivers/iio/adc/max9611.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/adc/max9611.c b/drivers/iio/adc/max9611.c
index da073d72f649..30ae5879252c 100644
--- a/drivers/iio/adc/max9611.c
+++ b/drivers/iio/adc/max9611.c
@@ -80,6 +80,7 @@
* The complete formula to calculate temperature is:
* ((adc_read >> 7) * 1000) / (1 / 480 * 1000)
*/
+#define MAX9611_TEMP_POR 0x8000
#define MAX9611_TEMP_MAX_POS 0x7f80
#define MAX9611_TEMP_MAX_NEG 0xff80
#define MAX9611_TEMP_MIN_NEG 0xd980
@@ -480,8 +481,10 @@ static int max9611_init(struct max9611_dev *max9611)
if (ret)
return ret;

- regval &= MAX9611_TEMP_MASK;
+ if (regval == MAX9611_TEMP_POR)
+ return -EPROBE_DEFER;

+ regval &= MAX9611_TEMP_MASK;
if ((regval > MAX9611_TEMP_MAX_POS &&
regval < MAX9611_TEMP_MIN_NEG) ||
regval > MAX9611_TEMP_MAX_NEG) {
--
2.23.0
\
 
 \ /
  Last update: 2019-10-16 12:24    [W:0.050 / U:2.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site