lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/2] usb: cdns3: fix cdns3_core_init_role()
Date
>
>
>Hi Pawel,
>
>On 16/10/2019 07:32, Pawel Laszczak wrote:
>> Hi Roger
>>
>>>
>>> At startup we should trigger the HW state machine
>>> only if it is OTG mode. Otherwise we should just
>>> start the respective role.
>>>
>>> Initialize idle role by default. If we don't do this then
>>> cdns3_idle_role_stop() is not called when switching to
>>> host/device role and so lane switch mechanism
>>> doesn't work. This results to super-speed device not working
>>> in one orientation if it was plugged before driver probe.
>>>
>>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>>> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
>>> ---
>>> drivers/usb/cdns3/core.c | 20 +++++++++++++++++++-
>>> 1 file changed, 19 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
>>> index 06f1e105be4e..1109dc5a4c39 100644
>>> --- a/drivers/usb/cdns3/core.c
>>> +++ b/drivers/usb/cdns3/core.c
>>> @@ -160,10 +160,28 @@ static int cdns3_core_init_role(struct cdns3 *cdns)
>>> if (ret)
>>> goto err;
>>>
>>> - if (cdns->dr_mode != USB_DR_MODE_OTG) {
>>> + /* Initialize idle role to start with */
>>> + ret = cdns3_role_start(cdns, USB_ROLE_NONE);
>>> + if (ret)
>>> + goto err;
>>> +
>>> + switch (cdns->dr_mode) {
>>> + case USB_DR_MODE_UNKNOWN:
>>
>> One note in this place. USB_DR_MODE_UNKNOWN is not possible in this place.
>> If cdns->dr_mode will be USB_DR_MODE_UNKNOWN then driver returns -EINVAL
>
>At which place? I could not find.

In this patch we can't see this line:
https://elixir.bootlin.com/linux/v5.4-rc2/source/drivers/usb/cdns3/core.c#L159
There is called cdns3_drd_update_mode(cdns);

int cdns3_drd_update_mode(struct cdns3 *cdns)
{
int ret = 0;

switch (cdns->dr_mode) {
case USB_DR_MODE_PERIPHERAL:
ret = cdns3_set_mode(cdns, USB_DR_MODE_PERIPHERAL);
break;
case USB_DR_MODE_HOST:
ret = cdns3_set_mode(cdns, USB_DR_MODE_HOST);
break;
case USB_DR_MODE_OTG:
ret = cdns3_init_otg_mode(cdns);
break;
default:
dev_err(cdns->dev, "Unsupported mode of operation %d\n",
cdns->dr_mode);
return -EINVAL;
}

return ret;
}

After calling cdns3_drd_update_mode we have 2 first lines from this patch
if (ret)
goto err;

Pawel
>
>> some line before after returning form cdns3_drd_update_mode and in consequence
>> it jump to err label.
>>
>> Maybe for better readability it this condition should be treated here also as error.
>>
>>> + case USB_DR_MODE_OTG:
>>> ret = cdns3_hw_role_switch(cdns);
>>> if (ret)
>>> goto err;
>>> + break;
>>> + case USB_DR_MODE_PERIPHERAL:
>>> + ret = cdns3_role_start(cdns, USB_ROLE_DEVICE);
>>> + if (ret)
>>> + goto err;
>>> + break;
>>> + case USB_DR_MODE_HOST:
>>> + ret = cdns3_role_start(cdns, USB_ROLE_HOST);
>>> + if (ret)
>>> + goto err;
>>> + break;
>>> }
>>>
>>> return ret;
>>
>> Reviewed-by: Pawel Laszczak <pawell@cadence.com>
>> Tested-by: Pawel Laszczak <pawell@cadence.com>
>>
>> --
>> Regards,
>> Pawel
>>
>
>--
>cheers,
>-roger
>Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
\
 
 \ /
  Last update: 2019-10-16 11:40    [W:0.069 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site