lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2] rtl8xxxu: fix RTL8723BU connection failure issue after warm reboot
On Wed, Oct 16, 2019 at 9:54 AM Chris Chiu <chiu@endlessm.com> wrote:
>
> The RTL8723BU has problems connecting to AP after each warm reboot.
> Sometimes it returns no scan result, and in most cases, it fails
> the authentication for unknown reason. However, it works totally
> fine after cold reboot.
>
> Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE
> for cold reboot and warm reboot, the registers imply that the MAC
> is already powered and thus some procedures are skipped during
> driver initialization. Double checked the vendor driver, it reads
> the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any
> during initialization based on them. This commit only tells the
> RTL8723BU to do full initialization without checking MAC status.
>
> Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>

Sorry, I forgot to add Jes.

Chris
> ---
>
> Note:
> v2: fix typo of commit message
>
>

\
 
 \ /
  Last update: 2019-10-17 04:26    [W:0.077 / U:2.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site