lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.19 42/81] gpio: eic: sprd: Fix the incorrect EIC offset when toggling
Date
From: Bruce Chen <bruce.chen@unisoc.com>

commit e91aafcb51f3c5001ae76c3ee027beb0b8506447 upstream.

When toggling the level trigger to emulate the edge trigger, the
EIC offset is incorrect without adding the corresponding bank index,
thus fix it.

Fixes: 7bf0d7f62282 ("gpio: eic: Add edge trigger emulation for EIC")
Cc: stable@vger.kernel.org
Signed-off-by: Bruce Chen <bruce.chen@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/gpio/gpio-eic-sprd.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/gpio/gpio-eic-sprd.c
+++ b/drivers/gpio/gpio-eic-sprd.c
@@ -529,11 +529,12 @@ static void sprd_eic_handle_one_type(str
}

for_each_set_bit(n, &reg, SPRD_EIC_PER_BANK_NR) {
- girq = irq_find_mapping(chip->irq.domain,
- bank * SPRD_EIC_PER_BANK_NR + n);
+ u32 offset = bank * SPRD_EIC_PER_BANK_NR + n;
+
+ girq = irq_find_mapping(chip->irq.domain, offset);

generic_handle_irq(girq);
- sprd_eic_toggle_trigger(chip, girq, n);
+ sprd_eic_toggle_trigger(chip, girq, offset);
}
}
}

\
 
 \ /
  Last update: 2019-10-17 00:07    [W:0.356 / U:1.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site