lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.9 45/92] usb: xhci: wait for CNR controller not ready bit in xhci resume
Date
From: Rick Tseng <rtseng@nvidia.com>

commit a70bcbc322837eda1ab5994d12db941dc9733a7d upstream.

NVIDIA 3.1 xHCI card would lose power when moving power state into D3Cold.
Thus we need to wait for CNR bit to clear in xhci resume, just as in
xhci init.

[Minor changes to comment and commit message -Mathias]
Cc: <stable@vger.kernel.org>
Signed-off-by: Rick Tseng <rtseng@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-6-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/host/xhci.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1045,6 +1045,18 @@ int xhci_resume(struct xhci_hcd *xhci, b
hibernated = true;

if (!hibernated) {
+ /*
+ * Some controllers might lose power during suspend, so wait
+ * for controller not ready bit to clear, just as in xHC init.
+ */
+ retval = xhci_handshake(&xhci->op_regs->status,
+ STS_CNR, 0, 10 * 1000 * 1000);
+ if (retval) {
+ xhci_warn(xhci, "Controller not ready at resume %d\n",
+ retval);
+ spin_unlock_irq(&xhci->lock);
+ return retval;
+ }
/* step 1: restore register */
xhci_restore_registers(xhci);
/* step 2: initialize command ring buffer */

\
 
 \ /
  Last update: 2019-10-16 23:55    [W:0.181 / U:1.676 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site