lkml.org 
[lkml]   [2019]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [Patch v3 1/7] sched/pelt.c: Add support to track thermal pressure
From
Date
Hi Vincent,

Thanks for the review.
On 10/14/2019 09:55 AM, Vincent Guittot wrote:
> Hi Thara,
>
> On Mon, 14 Oct 2019 at 02:58, Thara Gopinath <thara.gopinath@linaro.org> wrote:
>>
>> Extrapolating on the exisitng framework to track rt/dl utilization using
>
> s/exisitng/existing/
>
>> pelt signals, add a similar mechanism to track thermal pressue. The
>
> s/pessure/pressure/
Will fix all the typo.
>
>> difference here from rt/dl utilization tracking is that, instead of
>> tracking time spent by a cpu running a rt/dl task through util_avg,
>> the average thermal pressure is tracked through load_avg.
>
> It would be good to mention why you use load_avg field instead of
> util_avg field: because the signal is weighted with the capped
> capacity and is not binary
> And also explained a bit what capacity refer to
>
>> In order to track average thermal pressure, a new sched_avg variable
>> avg_thermal is introduced. Function update_thermal_avg can be called
>> to do the periodic bookeeping (accumulate, decay and average)
>> of the thermal pressure.
>>
>> Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
>> ---
>> kernel/sched/pelt.c | 13 +++++++++++++
>> kernel/sched/pelt.h | 7 +++++++
>> kernel/sched/sched.h | 1 +
>> 3 files changed, 21 insertions(+)
>>
>> diff --git a/kernel/sched/pelt.c b/kernel/sched/pelt.c
>> index a96db50..f06aae3 100644
>> --- a/kernel/sched/pelt.c
>> +++ b/kernel/sched/pelt.c
>> @@ -353,6 +353,19 @@ int update_dl_rq_load_avg(u64 now, struct rq *rq, int running)
>> return 0;
>> }
>>
>> +int update_thermal_avg(u64 now, struct rq *rq, u64 capacity)
>
> All the other functions are named :
> update_cfs_rq/rt_rq/dl_rq/irq_load_avg
>
> might be good to keep similar name with update_thermal_load_avg

Sure. Will rename the function.
>
>> +{
>> + if (___update_load_sum(now, &rq->avg_thermal,
>> + capacity,
>> + capacity,
>> + capacity)) {
>> + ___update_load_avg(&rq->avg_thermal, 1, 1);
>> + return 1;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> #ifdef CONFIG_HAVE_SCHED_AVG_IRQ
>> /*
>> * irq:
>> diff --git a/kernel/sched/pelt.h b/kernel/sched/pelt.h
>> index afff644..01c5436 100644
>> --- a/kernel/sched/pelt.h
>> +++ b/kernel/sched/pelt.h
>> @@ -6,6 +6,7 @@ int __update_load_avg_se(u64 now, struct cfs_rq *cfs_rq, struct sched_entity *se
>> int __update_load_avg_cfs_rq(u64 now, struct cfs_rq *cfs_rq);
>> int update_rt_rq_load_avg(u64 now, struct rq *rq, int running);
>> int update_dl_rq_load_avg(u64 now, struct rq *rq, int running);
>> +int update_thermal_avg(u64 now, struct rq *rq, u64 capacity);
>>
>> #ifdef CONFIG_HAVE_SCHED_AVG_IRQ
>> int update_irq_load_avg(struct rq *rq, u64 running);
>> @@ -175,6 +176,12 @@ update_rq_clock_pelt(struct rq *rq, s64 delta) { }
>> static inline void
>> update_idle_rq_clock_pelt(struct rq *rq) { }
>>
>> +static inline int
>
> can you keep some function ordering as above and move
> update_thermal_avg() just after update_dl_rq_load_avg

will do.

Warm Regards
Thara

\
 
 \ /
  Last update: 2019-10-16 23:16    [W:0.132 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site