lkml.org 
[lkml]   [2019]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 15/16] phy: phy-mmp3-usb: add a new driver
From
Date
Hi,

On 31/08/19 3:37 AM, Lubomir Rintel wrote:

Change the $subject to "phy: Add USB2 PHY driver for Marvell MMP3 SoC"
> This is the USB2 PHY as found on the Marvell MMP3 SoC. Based on Marvell GPL
> release.

Just have "Add PHY driver for the USB2 PHY found on Marvell MMP3 SoC." here.
>
> While at that, also add a MAINTAINERS entry including the other MMP PHY
> driver.

Adding MAINTAINERS could be a different patch.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>

Once the commit log is fixed:
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>

Thanks
Kishon
> ---
> MAINTAINERS | 7 +
> drivers/phy/marvell/Kconfig | 11 ++
> drivers/phy/marvell/Makefile | 1 +
> drivers/phy/marvell/phy-mmp3-usb.c | 291 +++++++++++++++++++++++++++++
> 4 files changed, 310 insertions(+)
> create mode 100644 drivers/phy/marvell/phy-mmp3-usb.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 176ef19f0b9db..449349f8f20bf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10799,6 +10799,13 @@ F: arch/arm/boot/dts/mmp*
> F: arch/arm/mach-mmp/
> F: linux/soc/mmp/
>
> +MMP USB PHY DRIVERS
> +R: Lubomir Rintel <lkundrak@v3.sk>
> +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
> +S: Maintained
> +F: drivers/phy/marvell/phy-mmp3-usb.c
> +F: drivers/phy/marvell/phy-pxa-usb.c
> +
> MMU GATHER AND TLB INVALIDATION
> M: Will Deacon <will@kernel.org>
> M: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
> diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
> index 0e1642419c0bf..d33ef35b3e51b 100644
> --- a/drivers/phy/marvell/Kconfig
> +++ b/drivers/phy/marvell/Kconfig
> @@ -102,3 +102,14 @@ config PHY_PXA_USB
> The PHY driver will be used by Marvell udc/ehci/otg driver.
>
> To compile this driver as a module, choose M here.
> +
> +config PHY_MMP3_USB
> + tristate "Marvell MMP3 USB PHY Driver"
> + depends on MACH_MMP3_DT || COMPILE_TEST
> + select GENERIC_PHY
> + help
> + Enable this to support Marvell MMP3 USB PHY driver for Marvell
> + SoC. This driver will do the PHY initialization and shutdown.
> + The PHY driver will be used by Marvell udc/ehci/otg driver.
> +
> + To compile this driver as a module, choose M here.
> diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
> index 434eb9ca6cc3f..5a106b1549f41 100644
> --- a/drivers/phy/marvell/Makefile
> +++ b/drivers/phy/marvell/Makefile
> @@ -2,6 +2,7 @@
> obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
> +obj-$(CONFIG_PHY_MMP3_USB) += phy-mmp3-usb.o
> obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o
> obj-$(CONFIG_PHY_MVEBU_A3700_UTMI) += phy-mvebu-a3700-utmi.o
> obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY) += phy-armada38x-comphy.o
> diff --git a/drivers/phy/marvell/phy-mmp3-usb.c b/drivers/phy/marvell/phy-mmp3-usb.c
> new file mode 100644
> index 0000000000000..499869595a582
> --- /dev/null
> +++ b/drivers/phy/marvell/phy-mmp3-usb.c
> @@ -0,0 +1,291 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
> + * Copyright (C) 2018,2019 Lubomir Rintel <lkundrak@v3.sk>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/soc/mmp/cputype.h>
> +
> +#define USB2_PLL_REG0 0x4
> +#define USB2_PLL_REG1 0x8
> +#define USB2_TX_REG0 0x10
> +#define USB2_TX_REG1 0x14
> +#define USB2_TX_REG2 0x18
> +#define USB2_RX_REG0 0x20
> +#define USB2_RX_REG1 0x24
> +#define USB2_RX_REG2 0x28
> +#define USB2_ANA_REG0 0x30
> +#define USB2_ANA_REG1 0x34
> +#define USB2_ANA_REG2 0x38
> +#define USB2_DIG_REG0 0x3C
> +#define USB2_DIG_REG1 0x40
> +#define USB2_DIG_REG2 0x44
> +#define USB2_DIG_REG3 0x48
> +#define USB2_TEST_REG0 0x4C
> +#define USB2_TEST_REG1 0x50
> +#define USB2_TEST_REG2 0x54
> +#define USB2_CHARGER_REG0 0x58
> +#define USB2_OTG_REG0 0x5C
> +#define USB2_PHY_MON0 0x60
> +#define USB2_RESETVE_REG0 0x64
> +#define USB2_ICID_REG0 0x78
> +#define USB2_ICID_REG1 0x7C
> +
> +/* USB2_PLL_REG0 */
> +
> +/* This is for Ax stepping */
> +#define USB2_PLL_FBDIV_SHIFT_MMP3 0
> +#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0)
> +
> +#define USB2_PLL_REFDIV_SHIFT_MMP3 8
> +#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8)
> +
> +#define USB2_PLL_VDD12_SHIFT_MMP3 12
> +#define USB2_PLL_VDD18_SHIFT_MMP3 14
> +
> +/* This is for B0 stepping */
> +#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0
> +#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9
> +#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14
> +#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF
> +#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00
> +
> +#define USB2_PLL_CAL12_SHIFT_MMP3 0
> +#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0)
> +
> +#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2
> +
> +#define USB2_PLL_KVCO_SHIFT_MMP3 4
> +#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4)
> +
> +#define USB2_PLL_ICP_SHIFT_MMP3 8
> +#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8)
> +
> +#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12
> +
> +#define USB2_PLL_PU_PLL_SHIFT_MMP3 13
> +#define USB2_PLL_PU_PLL_MASK (0x1 << 13)
> +
> +#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15)
> +
> +/* USB2_TX_REG0 */
> +#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8
> +#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8)
> +
> +#define USB2_TX_RCAL_START_SHIFT_MMP3 13
> +
> +/* USB2_TX_REG1 */
> +#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0
> +#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0)
> +
> +#define USB2_TX_AMP_SHIFT_MMP3 4
> +#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4)
> +
> +#define USB2_TX_VDD12_SHIFT_MMP3 8
> +#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8)
> +
> +/* USB2_TX_REG2 */
> +#define USB2_TX_DRV_SLEWRATE_SHIFT 10
> +
> +/* USB2_RX_REG0 */
> +#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4
> +#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4)
> +
> +#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10
> +#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10)
> +
> +/* USB2_ANA_REG1*/
> +#define USB2_ANA_PU_ANA_SHIFT_MMP3 14
> +
> +/* USB2_OTG_REG0 */
> +#define USB2_OTG_PU_OTG_SHIFT_MMP3 3
> +
> +struct mmp3_usb_phy {
> + struct phy *phy;
> + void __iomem *base;
> +};
> +
> +static unsigned int u2o_get(void __iomem *base, unsigned int offset)
> +{
> + return readl_relaxed(base + offset);
> +}
> +
> +static void u2o_set(void __iomem *base, unsigned int offset,
> + unsigned int value)
> +{
> + u32 reg;
> +
> + reg = readl_relaxed(base + offset);
> + reg |= value;
> + writel_relaxed(reg, base + offset);
> + readl_relaxed(base + offset);
> +}
> +
> +static void u2o_clear(void __iomem *base, unsigned int offset,
> + unsigned int value)
> +{
> + u32 reg;
> +
> + reg = readl_relaxed(base + offset);
> + reg &= ~value;
> + writel_relaxed(reg, base + offset);
> + readl_relaxed(base + offset);
> +}
> +
> +static int mmp3_usb_phy_init(struct phy *phy)
> +{
> + struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy);
> + void __iomem *base = mmp3_usb_phy->base;
> +
> + if (cpu_is_mmp3_a0()) {
> + u2o_clear(base, USB2_PLL_REG0, (USB2_PLL_FBDIV_MASK_MMP3
> + | USB2_PLL_REFDIV_MASK_MMP3));
> + u2o_set(base, USB2_PLL_REG0,
> + 0xd << USB2_PLL_REFDIV_SHIFT_MMP3
> + | 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3);
> + } else if (cpu_is_mmp3_b0()) {
> + u2o_clear(base, USB2_PLL_REG0, USB2_PLL_REFDIV_MASK_MMP3_B0
> + | USB2_PLL_FBDIV_MASK_MMP3_B0);
> + u2o_set(base, USB2_PLL_REG0,
> + 0xd << USB2_PLL_REFDIV_SHIFT_MMP3_B0
> + | 0xf0 << USB2_PLL_FBDIV_SHIFT_MMP3_B0);
> + } else {
> + dev_err(&phy->dev, "unsupported silicon revision\n");
> + return -ENODEV;
> + }
> +
> + u2o_clear(base, USB2_PLL_REG1, USB2_PLL_PU_PLL_MASK
> + | USB2_PLL_ICP_MASK_MMP3
> + | USB2_PLL_KVCO_MASK_MMP3
> + | USB2_PLL_CALI12_MASK_MMP3);
> + u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_PU_PLL_SHIFT_MMP3
> + | 1 << USB2_PLL_LOCK_BYPASS_SHIFT_MMP3
> + | 3 << USB2_PLL_ICP_SHIFT_MMP3
> + | 3 << USB2_PLL_KVCO_SHIFT_MMP3
> + | 3 << USB2_PLL_CAL12_SHIFT_MMP3);
> +
> + u2o_clear(base, USB2_TX_REG0, USB2_TX_IMPCAL_VTH_MASK_MMP3);
> + u2o_set(base, USB2_TX_REG0, 2 << USB2_TX_IMPCAL_VTH_SHIFT_MMP3);
> +
> + u2o_clear(base, USB2_TX_REG1, USB2_TX_VDD12_MASK_MMP3
> + | USB2_TX_AMP_MASK_MMP3
> + | USB2_TX_CK60_PHSEL_MASK_MMP3);
> + u2o_set(base, USB2_TX_REG1, 3 << USB2_TX_VDD12_SHIFT_MMP3
> + | 4 << USB2_TX_AMP_SHIFT_MMP3
> + | 4 << USB2_TX_CK60_PHSEL_SHIFT_MMP3);
> +
> + u2o_clear(base, USB2_TX_REG2, 3 << USB2_TX_DRV_SLEWRATE_SHIFT);
> + u2o_set(base, USB2_TX_REG2, 2 << USB2_TX_DRV_SLEWRATE_SHIFT);
> +
> + u2o_clear(base, USB2_RX_REG0, USB2_RX_SQ_THRESH_MASK_MMP3);
> + u2o_set(base, USB2_RX_REG0, 0xa << USB2_RX_SQ_THRESH_SHIFT_MMP3);
> +
> + u2o_set(base, USB2_ANA_REG1, 0x1 << USB2_ANA_PU_ANA_SHIFT_MMP3);
> +
> + u2o_set(base, USB2_OTG_REG0, 0x1 << USB2_OTG_PU_OTG_SHIFT_MMP3);
> +
> + return 0;
> +}
> +
> +static int mmp3_usb_phy_calibrate(struct phy *phy)
> +{
> + struct mmp3_usb_phy *mmp3_usb_phy = phy_get_drvdata(phy);
> + void __iomem *base = mmp3_usb_phy->base;
> + int loops;
> +
> + /*
> + * PLL VCO and TX Impedance Calibration Timing:
> + *
> + * _____________________________________
> + * PU __________|
> + * _____________________________
> + * VCOCAL START _________|
> + * ___
> + * REG_RCAL_START ________________| |________|_______
> + * | 200us | 400us | 40| 400us | USB PHY READY
> + */
> +
> + udelay(200);
> + u2o_set(base, USB2_PLL_REG1, 1 << USB2_PLL_VCOCAL_START_SHIFT_MMP3);
> + udelay(400);
> + u2o_set(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3);
> + udelay(40);
> + u2o_clear(base, USB2_TX_REG0, 1 << USB2_TX_RCAL_START_SHIFT_MMP3);
> + udelay(400);
> +
> + loops = 0;
> + while ((u2o_get(base, USB2_PLL_REG1) & USB2_PLL_READY_MASK_MMP3) == 0) {
> + mdelay(1);
> + loops++;
> + if (loops > 100) {
> + dev_err(&phy->dev, "PLL_READY not set after 100mS.\n");
> + return -ETIMEDOUT;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static const struct phy_ops mmp3_usb_phy_ops = {
> + .init = mmp3_usb_phy_init,
> + .calibrate = mmp3_usb_phy_calibrate,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct of_device_id mmp3_usb_phy_of_match[] = {
> + { .compatible = "marvell,mmp3-usb-phy", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, mmp3_usb_phy_of_match);
> +
> +static int mmp3_usb_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct resource *resource;
> + struct mmp3_usb_phy *mmp3_usb_phy;
> + struct phy_provider *provider;
> +
> + mmp3_usb_phy = devm_kzalloc(dev, sizeof(*mmp3_usb_phy), GFP_KERNEL);
> + if (!mmp3_usb_phy)
> + return -ENOMEM;
> +
> + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + mmp3_usb_phy->base = devm_ioremap_resource(dev, resource);
> + if (IS_ERR(mmp3_usb_phy->base)) {
> + dev_err(dev, "failed to remap PHY regs\n");
> + return PTR_ERR(mmp3_usb_phy->base);
> + }
> +
> + mmp3_usb_phy->phy = devm_phy_create(dev, NULL, &mmp3_usb_phy_ops);
> + if (IS_ERR(mmp3_usb_phy->phy)) {
> + dev_err(dev, "failed to create PHY\n");
> + return PTR_ERR(mmp3_usb_phy->phy);
> + }
> +
> + phy_set_drvdata(mmp3_usb_phy->phy, mmp3_usb_phy);
> + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (IS_ERR(provider)) {
> + dev_err(dev, "failed to register PHY provider\n");
> + return PTR_ERR(provider);
> + }
> +
> + return 0;
> +}
> +
> +static struct platform_driver mmp3_usb_phy_driver = {
> + .probe = mmp3_usb_phy_probe,
> + .driver = {
> + .name = "mmp3-usb-phy",
> + .of_match_table = mmp3_usb_phy_of_match,
> + },
> +};
> +module_platform_driver(mmp3_usb_phy_driver);
> +
> +MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>");
> +MODULE_DESCRIPTION("Marvell MMP3 USB PHY Driver");
> +MODULE_LICENSE("GPL v2");
>

\
 
 \ /
  Last update: 2019-10-10 11:00    [W:0.114 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site