[lkml]   [2019]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH 0/3] Add coresight support for SDM845
This patch series adds support for coresight on SDM845. 

* Patch 1 adds device tree nodes for SDM845 coresight components.

* Patch 2 enables support for ETMv4.2 and enables SDM845 to make
use of same driver(etm4x).

* Patch 3 is a trivial removal of duplicate header file.

Patch 1 and 2 depends on below AOSS QMP patches by Bjorn:

This patch series has been tested on SDM845 MTP.

Sai Prakash Ranjan (3):
arm64: dts: qcom: sdm845: Add Coresight support
coresight: etm4x: Add support to enable ETMv4.2
arm64: dts: qcom: sdm845: Remove the duplicate header inclusion

.../arm64/boot/dts/qcom/sdm845-coresight.dtsi | 437 ++++++++++++++++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 3 +-
drivers/hwtracing/coresight/coresight-etm4x.c | 2 +-
drivers/hwtracing/coresight/coresight-etm4x.h | 2 +-
4 files changed, 441 insertions(+), 3 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/sdm845-coresight.dtsi

QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

 \ /
  Last update: 2019-01-09 18:48    [W:0.206 / U:3.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site