[lkml]   [2019]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v3 0/6] qcom: spmi: add support for hierarchical IRQ chip
This patch series adds hierarchical IRQ chip support to spmi-gpio so
that device tree consumers can request an IRQ directly from the GPIO
block rather than having to request an IRQ from the underlying PMIC.

For more background information, see the email thread with Linus
Walleij's excellent description of the problem at

This work was tested on a LG Nexus 5 (hammerhead) phone. My status page
at describes what is working
so far with an upstream kernel.

High-level changes since v2:
- Dropped patch to mfd/qcom-spmi-pmic.c
- Patch 3 is new and adds two new functions to gpiolib
- Patch 6 is new and corrects the only other upstream user of spmi-gpio

High-level changes since v1:
- Patches 1 and 2 are new. This brought in a third subsystem (mfd).
- I have detailed changelogs attached to the notes on patches 3-5.

Brian Masney (6):
pinctrl: qcom: spmi-gpio: hardcode IRQ counts
spmi: pmic-arb: convert to v2 irq interfaces to support hierarchical
IRQ chips
gpio: add irq domain activate/deactivate functions
qcom: spmi-gpio: add support for hierarchical IRQ chip
ARM: dts: qcom: pm8941: add interrupt controller properties
ARM: dts: qcom: pma8084: add interrupt controller properties

arch/arm/boot/dts/qcom-pm8941.dtsi | 38 +------
arch/arm/boot/dts/qcom-pma8084.dtsi | 24 +---
drivers/gpio/gpiolib.c | 37 +++++++
drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 134 +++++++++++++++++++----
drivers/spmi/spmi-pmic-arb.c | 58 ++++++----
include/linux/gpio/driver.h | 5 +
6 files changed, 194 insertions(+), 102 deletions(-)


 \ /
  Last update: 2019-01-10 02:14    [W:0.127 / U:13.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site