lkml.org 
[lkml]   [2019]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 11/15] KVM: s390: restore IAM in get_ipm() when IPM is clean
From
Date


On 07.01.19 00:32, Halil Pasic wrote:
> On Wed, 19 Dec 2018 20:17:52 +0100
> Michael Mueller <mimu@linux.ibm.com> wrote:
>
>> The patch adds the parameter irq_flags and allows to
>> restore the Interruption Alert Mask (IAM) in the GISA
>> atomically while guaranteeing the IPM is clean.
>>
>> The function returns the IPM of the GISA. If the returned
>> value is 0x00 and the IRQ_FLAG_IAM was set, the IAM has
>> been restored.
>>
>> New irq flag:
>> IRQ_FLAG_IAM: When set, the IAM is restored if no ISC bit
>> is set in the IPM, i.e. no new airqs are
>> pending. The test and restore operations
>> are done atomically.
>>
>> Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
>> ---
>> arch/s390/kvm/interrupt.c | 34 +++++++++++++++++++++++++++++-----
>> 1 file changed, 29 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
>> index 1cc3ad2e6c7e..8307717e3caf 100644
>> --- a/arch/s390/kvm/interrupt.c
>> +++ b/arch/s390/kvm/interrupt.c
>> @@ -37,6 +37,7 @@
>> #define IRQ_FLAG_LOCAL 0x8000 /* include local interruption pending mask */
>> #define IRQ_FLAG_FLOATING 0x4000 /* include float interruption pending mask */
>> #define IRQ_FLAG_GISA 0x2000 /* include GISA interruption pending mask */
>> +#define IRQ_FLAG_IAM 0x0080 /* when set try to restore IAM */
>>
>> #define IRQ_MASK_ALL (IRQ_FLAG_LOCAL | IRQ_FLAG_FLOATING | IRQ_FLAG_GISA)
>> #define IRQ_MASK_NO_GISA (IRQ_MASK_ALL & ~IRQ_FLAG_GISA)
>> @@ -253,9 +254,32 @@ static inline void set_ipm_gisc(struct kvm_s390_gisa *gisa, u32 gisc)
>> set_bit_inv(IPM_BIT_OFFSET + gisc, (unsigned long *) gisa);
>> }
>>
>> -static inline u8 get_ipm(struct kvm_s390_gisa *gisa)
>> +static inline u8 get_ipm(struct kvm_s390_gisa *gisa, u16 irq_flags)
>> {
>> - return READ_ONCE(gisa->ipm);
>> + u64 word, _word;
>> + u8 ipm;
>> +
>> + if (!(irq_flags & IRQ_FLAG_IAM))
>> + return READ_ONCE(gisa->ipm);
>> +
>> + do {
>> + word = READ_ONCE(gisa->u64.word[0]);
>> + ipm = word >> 24;
>> + /* If the GISA is in the alert list, return the IPM. */
>> + if ((u64)gisa != word >> 32)
>> + return ipm;
>> + /* If the IPM is dirty, return the IPM. */
>> + if (ipm)
>> + return ipm;
>> + /*
>> + * Try to restore the IAM or loop, if the IPM is dirty
>> + * again or the GISA has been inserted into the alert list.
>> + */
>> + _word = (word & ~0xffUL) |
>> + container_of(gisa, struct sie_page2, gisa)->kvm->arch.iam;
>> + } while (cmpxchg(&gisa->u64.word[0], word, _word) != _word);
> ^^
>
> Shouldn't this rather be:
> } while (cmpxchg(&gisa->u64.word[0], word, _word) != word);

Yes, the comparison needs to be done against the old value of
the memory region.

>
> Regards,
> Halil
>> +
>> + return 0;
>> }

\
 
 \ /
  Last update: 2019-01-08 09:08    [W:0.186 / U:10.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site