lkml.org 
[lkml]   [2019]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/8] gpio: zynq: Wakeup gpio controller when it is used as IRQ controller
Hello,

I am reviving this old thread, because the proposed patch (almost)
solves the problem I recently reported with the bad interaction of
runtime PM with the Zynq GPIO driver (see
https://www.spinics.net/lists/linux-gpio/msg35437.html).

On Mon, 14 Aug 2017 16:33:09 +0200, Michal Simek wrote:

> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index 9568708a550b..a08a044fa4aa 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -1647,14 +1647,22 @@ static void gpiochip_irq_unmap(struct irq_domain
> *d, unsigned int irq)
> static int gpiochip_irq_reqres(struct irq_data *d)
> {
> struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
> + int ret;
>
> if (!try_module_get(chip->gpiodev->owner))
> return -ENODEV;
>
> + ret = pm_runtime_get_sync(chip->parent);
> + if (ret < 0) {
> + module_put(chip->gpiodev->owner);
> + return ret;
> + }
> +
> if (gpiochip_lock_as_irq(chip, d->hwirq)) {
> chip_err(chip,
> "unable to lock HW IRQ %lu for IRQ\n",
> d->hwirq);
> + pm_runtime_put(chip->parent);
> module_put(chip->gpiodev->owner);
> return -EINVAL;
> }
> @@ -1666,6 +1674,7 @@ static void gpiochip_irq_relres(struct irq_data *d)
> struct gpio_chip *chip = irq_data_get_irq_chip_data(d);
>
> gpiochip_unlock_as_irq(chip, d->hwirq);
> + pm_runtime_put(chip->parent);
> module_put(chip->gpiodev->owner);
> }

This patch almost solves the problem. It doesn't work as-is, because it
assumes that runtime PM is used by all GPIO controllers, which is not
the case. When runtime PM is not enabled, pm_runtime_get_sync() fails
with -EACCES, and the whole gpiochip_irq_reqres() function aborts.

The following patch works fine in my case (a MMC card detect signal is
connected to a pin of a PCA GPIO expander over I2C, whose INT# pin is
itself connected to a GPIO pin of the Zynq SoC).

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 20887c62fbb3..bd9a81fc8d56 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -27,6 +27,7 @@
#include <linux/kfifo.h>
#include <linux/poll.h>
#include <linux/timekeeping.h>
+#include <linux/pm_runtime.h>
#include <uapi/linux/gpio.h>

#include "gpiolib.h"
@@ -3540,12 +3541,23 @@ int gpiochip_reqres_irq(struct gpio_chip *chip, unsigned int offset)
if (!try_module_get(chip->gpiodev->owner))
return -ENODEV;

+ if (pm_runtime_enabled(chip->parent)) {
+ ret = pm_runtime_get_sync(chip->parent);
+ if (ret < 0) {
+ module_put(chip->gpiodev->owner);
+ return ret;
+ }
+ }
+
ret = gpiochip_lock_as_irq(chip, offset);
if (ret) {
chip_err(chip, "unable to lock HW IRQ %u for IRQ\n", offset);
+ if (pm_runtime_enabled(chip->parent))
+ pm_runtime_put(chip->parent);
module_put(chip->gpiodev->owner);
return ret;
}
+
return 0;
}
EXPORT_SYMBOL_GPL(gpiochip_reqres_irq);
@@ -3553,6 +3565,8 @@ EXPORT_SYMBOL_GPL(gpiochip_reqres_irq);
void gpiochip_relres_irq(struct gpio_chip *chip, unsigned int offset)
{
gpiochip_unlock_as_irq(chip, offset);
+ if (pm_runtime_enabled(chip->parent))
+ pm_runtime_put(chip->parent);
module_put(chip->gpiodev->owner);
}
EXPORT_SYMBOL_GPL(gpiochip_relres_irq);
However, I must say that from a design perspective, I am not a big fan
of this solution. Indeed for the normal GPIO ->request() and ->free()
hooks, it is currently the GPIO driver itself that is responsible for
runtime PM get/put, so it would be weird to have the runtime PM get/put
for the IRQ request/free be done by the GPIO core.

I believe that either the GPIO core should be in charge of the entire
runtime PM interaction, or it should entirely be the responsibility of
each GPIO controller driver. Having a mixed solution seems very
confusing.

Let me know which direction should be taken so that I can submit a
proper patch to hopefully resolve this issue.

Best regards,

Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2019-01-07 18:25    [W:0.115 / U:1.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site