lkml.org 
[lkml]   [2019]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 11/15] KVM: s390: restore IAM in get_ipm() when IPM is clean
From
Date


On 03.01.19 16:06, Pierre Morel wrote:
> On 19/12/2018 20:17, Michael Mueller wrote:
>> The patch adds the parameter irq_flags and allows to
>> restore the Interruption Alert Mask (IAM) in the GISA
>> atomically while guaranteeing the IPM is clean.
>>
>> The function returns the IPM of the GISA. If the returned
>> value is 0x00 and the IRQ_FLAG_IAM was set, the IAM has
>> been restored.
>>
>> New irq flag:
>>    IRQ_FLAG_IAM: When set, the IAM is restored if no ISC bit
>>            is set in the IPM, i.e. no new airqs are
>>         pending. The test and restore operations
>>         are done atomically.
>>
>> Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
>> ---
>>   arch/s390/kvm/interrupt.c | 34 +++++++++++++++++++++++++++++-----
>>   1 file changed, 29 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
>> index 1cc3ad2e6c7e..8307717e3caf 100644
>> --- a/arch/s390/kvm/interrupt.c
>> +++ b/arch/s390/kvm/interrupt.c
>> @@ -37,6 +37,7 @@
>>   #define IRQ_FLAG_LOCAL    0x8000 /* include local interruption
>> pending mask */
>>   #define IRQ_FLAG_FLOATING 0x4000 /* include float interruption
>> pending mask */
>>   #define IRQ_FLAG_GISA     0x2000 /* include GISA interruption
>> pending mask */
>> +#define IRQ_FLAG_IAM      0x0080 /* when set try to restore IAM */
>>   #define IRQ_MASK_ALL      (IRQ_FLAG_LOCAL | IRQ_FLAG_FLOATING |
>> IRQ_FLAG_GISA)
>>   #define IRQ_MASK_NO_GISA  (IRQ_MASK_ALL & ~IRQ_FLAG_GISA)
>> @@ -253,9 +254,32 @@ static inline void set_ipm_gisc(struct
>> kvm_s390_gisa *gisa, u32 gisc)
>>       set_bit_inv(IPM_BIT_OFFSET + gisc, (unsigned long *) gisa);
>>   }
>> -static inline u8 get_ipm(struct kvm_s390_gisa *gisa)
>> +static inline u8 get_ipm(struct kvm_s390_gisa *gisa, u16 irq_flags)
>>   {
>> -    return READ_ONCE(gisa->ipm);
>> +    u64 word, _word;
>> +    u8 ipm;
>> +
>> +    if (!(irq_flags & IRQ_FLAG_IAM))
>> +        return READ_ONCE(gisa->ipm);
>> +
>> +    do {
>> +        word = READ_ONCE(gisa->u64.word[0]);
>> +        ipm = word >> 24;
>> +        /* If the GISA is in the alert list, return the IPM. */
>> +        if ((u64)gisa != word >> 32)
>> +            return ipm;
>> +        /* If the IPM is dirty, return the IPM. */
>> +        if (ipm)
>> +            return ipm;
>> +        /*
>> +         * Try to restore the IAM or loop, if the IPM is dirty
>> +         * again or the GISA has been inserted into the alert list.
>> +         */
>> +        _word = (word & ~0xffUL) |
>> +            container_of(gisa, struct sie_page2, gisa)->kvm->arch.iam;
>> +    } while (cmpxchg(&gisa->u64.word[0], word, _word) != _word);
>> +
>> +    return 0;
>>   }
>
> Personal opinion, but this function do more than just getting the IPM,
> shouldn't it be reflected in the function name?

The main task of this function is to fetch the IPM. The additional
functionality is expressed in the flags.

A call like get_ipm_try_iam_restore(kvm, 0) would be more confusing.

>
>>   static inline void clear_ipm_gisc(struct kvm_s390_gisa *gisa, u32 gisc)
>> @@ -277,7 +301,7 @@ static inline unsigned long pending_irqs(struct
>> kvm_vcpu *vcpu, u16 irq_flags)
>>       if (irq_flags & IRQ_FLAG_FLOATING)
>>           pending_irqs |= vcpu->kvm->arch.float_int.pending_irqs;
>>       if (irq_flags & IRQ_FLAG_GISA)
>> -        pending_irqs |= get_ipm(vcpu->kvm->arch.gisa) <<
>> +        pending_irqs |= get_ipm(vcpu->kvm->arch.gisa, irq_flags) <<
>>               IRQ_PEND_IO_ISC_7;
>>       return pending_irqs;
>>   }
>> @@ -1574,7 +1598,7 @@ static int get_top_gisa_isc(struct kvm *kvm, u64
>> isc_mask, u32 schid)
>>       if (!kvm->arch.gisa)
>>           goto out;
>> -    active_mask = (isc_mask & get_ipm(kvm->arch.gisa) << 24) << 32;
>> +    active_mask = (isc_mask & get_ipm(kvm->arch.gisa, IRQ_FLAG_IAM)
>> << 24) << 32;
>
> why do we need to set the IAM here?

Yes, it should not be required, only when a vcpu goes into wait state.

>
>>       while (active_mask) {
>>           isc = __fls(active_mask) ^ (BITS_PER_LONG - 1);
>>           if (tac_ipm_gisc(kvm->arch.gisa, isc))
>> @@ -2060,7 +2084,7 @@ static int get_all_floating_irqs(struct kvm
>> *kvm, u8 __user *usrbuf, u64 len)
>>       max_irqs = len / sizeof(struct kvm_s390_irq);
>>       if (kvm->arch.gisa &&
>> -        get_ipm(kvm->arch.gisa)) {
>> +        get_ipm(kvm->arch.gisa, IRQ_FLAG_IAM)) {
>
> and here?

Yes, it should not be required, only when a vcpu goes into wait state.

>
>>           for (i = 0; i <= MAX_ISC; i++) {
>>               if (n == max_irqs) {
>>                   /* signal userspace to try again */
>>
>
>

\
 
 \ /
  Last update: 2019-01-07 19:18    [W:0.172 / U:5.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site