lkml.org 
[lkml]   [2019]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 11/15] KVM: s390: restore IAM in get_ipm() when IPM is clean
On Wed, 19 Dec 2018 20:17:52 +0100
Michael Mueller <mimu@linux.ibm.com> wrote:

> The patch adds the parameter irq_flags and allows to
> restore the Interruption Alert Mask (IAM) in the GISA
> atomically while guaranteeing the IPM is clean.
>
> The function returns the IPM of the GISA. If the returned
> value is 0x00 and the IRQ_FLAG_IAM was set, the IAM has
> been restored.
>
> New irq flag:
> IRQ_FLAG_IAM: When set, the IAM is restored if no ISC bit
> is set in the IPM, i.e. no new airqs are
> pending. The test and restore operations
> are done atomically.
>
> Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
> ---
> arch/s390/kvm/interrupt.c | 34 +++++++++++++++++++++++++++++-----
> 1 file changed, 29 insertions(+), 5 deletions(-)
>
> diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
> index 1cc3ad2e6c7e..8307717e3caf 100644
> --- a/arch/s390/kvm/interrupt.c
> +++ b/arch/s390/kvm/interrupt.c
> @@ -37,6 +37,7 @@
> #define IRQ_FLAG_LOCAL 0x8000 /* include local interruption pending mask */
> #define IRQ_FLAG_FLOATING 0x4000 /* include float interruption pending mask */
> #define IRQ_FLAG_GISA 0x2000 /* include GISA interruption pending mask */
> +#define IRQ_FLAG_IAM 0x0080 /* when set try to restore IAM */
>
> #define IRQ_MASK_ALL (IRQ_FLAG_LOCAL | IRQ_FLAG_FLOATING | IRQ_FLAG_GISA)
> #define IRQ_MASK_NO_GISA (IRQ_MASK_ALL & ~IRQ_FLAG_GISA)
> @@ -253,9 +254,32 @@ static inline void set_ipm_gisc(struct kvm_s390_gisa *gisa, u32 gisc)
> set_bit_inv(IPM_BIT_OFFSET + gisc, (unsigned long *) gisa);
> }
>
> -static inline u8 get_ipm(struct kvm_s390_gisa *gisa)
> +static inline u8 get_ipm(struct kvm_s390_gisa *gisa, u16 irq_flags)
> {
> - return READ_ONCE(gisa->ipm);
> + u64 word, _word;
> + u8 ipm;
> +
> + if (!(irq_flags & IRQ_FLAG_IAM))
> + return READ_ONCE(gisa->ipm);
> +
> + do {
> + word = READ_ONCE(gisa->u64.word[0]);
> + ipm = word >> 24;
> + /* If the GISA is in the alert list, return the IPM. */
> + if ((u64)gisa != word >> 32)
> + return ipm;
> + /* If the IPM is dirty, return the IPM. */
> + if (ipm)
> + return ipm;
> + /*
> + * Try to restore the IAM or loop, if the IPM is dirty
> + * again or the GISA has been inserted into the alert list.
> + */
> + _word = (word & ~0xffUL) |
> + container_of(gisa, struct sie_page2, gisa)->kvm->arch.iam;
> + } while (cmpxchg(&gisa->u64.word[0], word, _word) != _word);
^^

Shouldn't this rather be:
} while (cmpxchg(&gisa->u64.word[0], word, _word) != word);

Regards,
Halil
> +
> + return 0;
> }

\
 
 \ /
  Last update: 2019-01-07 00:33    [W:0.187 / U:1.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site