lkml.org 
[lkml]   [2019]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 16/19] drm/panel: raydium: use DRM_DEV*
Date
Introduce use of DRM_DEV* for logging.
This makes logging in the drm subsystem more consistent.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
---
drivers/gpu/drm/panel/panel-raydium-rm68200.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-raydium-rm68200.c b/drivers/gpu/drm/panel/panel-raydium-rm68200.c
index e05e3f950855..bbf3f51c8a3a 100644
--- a/drivers/gpu/drm/panel/panel-raydium-rm68200.c
+++ b/drivers/gpu/drm/panel/panel-raydium-rm68200.c
@@ -379,14 +379,14 @@ static int rm68200_probe(struct mipi_dsi_device *dsi)
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
ret = PTR_ERR(ctx->reset_gpio);
- dev_err(dev, "cannot get reset GPIO: %d\n", ret);
+ DRM_DEV_ERROR(dev, "cannot get reset GPIO: %d\n", ret);
return ret;
}

ctx->supply = devm_regulator_get(dev, "power");
if (IS_ERR(ctx->supply)) {
ret = PTR_ERR(ctx->supply);
- dev_err(dev, "cannot get regulator: %d\n", ret);
+ DRM_DEV_ERROR(dev, "cannot get regulator: %d\n", ret);
return ret;
}

@@ -411,7 +411,7 @@ static int rm68200_probe(struct mipi_dsi_device *dsi)

ret = mipi_dsi_attach(dsi);
if (ret < 0) {
- dev_err(dev, "mipi_dsi_attach() failed: %d\n", ret);
+ DRM_DEV_ERROR(dev, "mipi_dsi_attach() failed: %d\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
--
2.12.0
\
 
 \ /
  Last update: 2019-01-31 20:27    [W:0.136 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site