lkml.org 
[lkml]   [2019]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V8 3/5] i2c: tegra: Add DMA Support
From
Date
31.01.2019 20:25, Dmitry Osipenko пишет:
> 31.01.2019 20:11, Dmitry Osipenko пишет:
>> 31.01.2019 19:56, Sowjanya Komatineni пишет:
>>>
>>>>>> drivers/i2c/busses/Kconfig | 2 +-
>>>>>> drivers/i2c/busses/i2c-tegra.c | 362
>>>>>> ++++++++++++++++++++++++++++++++++++++---
>>>>>> 2 files changed, 339 insertions(+), 25 deletions(-)
>>>>>
>>>>> Tegra20 crashes because of this patch:
>>>>>
>>>> [snip]
>>>>> <4>[ 3.395915] ------------[ cut here ]------------
>>>>> <2>[ 3.395919] kernel BUG at drivers/i2c/busses/i2c-tegra.c:810!
>>>> The BUG line is from:
>>>>
>>>> if (status & I2C_INT_PACKET_XFER_COMPLETE) {
>>>> if (i2c_dev->is_curr_dma_xfer)
>>>> i2c_dev->msg_buf_remaining = 0;
>>>> BUG_ON(i2c_dev->msg_buf_remaining);
>>>> complete(&i2c_dev->msg_complete);
>>>> }
>>>>
>>> BUG_ON line is not part of this change. It was already there in existing driver.
>>> Based on log, I see DMA transfer is done for 224 bytes followed by 1 successful PIO transfer and then on next PIO transfer it received packet xfer complete interrupt with incomplete transfer bytes and that where it hit BUG_ON condition.
>>>
>>>
>>
>> Yes, that BUG_ON is caused by the DMA transferring. Everything works fine be setting dma=false in the code, hence it's likely not a bug in the code (at least for now it looks fine), but likely that HW is not programmed correctly.
>>
>
> It works with this change:
>
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index fe5b89abc576..8e059e94b94e 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -1170,10 +1170,11 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
> time_left, completion_done(&i2c_dev->msg_complete),
> i2c_dev->msg_err);
>
> + tegra_i2c_init(i2c_dev, true);
> +
> if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
> return 0;
>
> - tegra_i2c_init(i2c_dev, true);
> /* start recovery upon arbitration loss in single master mode */
> if (i2c_dev->msg_err == I2C_ERR_ARBITRATION_LOST) {
> if (!i2c_dev->is_multimaster_mode)
>
>
> Which means that HW state is kept dirty after DMA transfer. Please check everything carefully.
>

Also, enforcing dma=true regardless of transfer size doesn't work as well.

\
 
 \ /
  Last update: 2019-01-31 18:39    [W:0.082 / U:5.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site