[lkml]   [2019]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCHv6 0/6] Add coresight support for SDM845, MSM8998 and MSM8996
This patch series adds support for coresight on SDM845, MSM8998, and MSM8996.

* Patch 1 adds device tree nodes for SDM845 coresight components.

* Patch 2 adds device tree nodes for MSM8998 coresight components.

* Patch 3 adds device tree nodes for MSM8996 coresight components.

* Patch 4 enables support for ETMv4.2 and enables SDM845 to make
use of same driver(etm4x).

* Patch 5 adds ETM PIDs for SDM845 and MSM8996.

* Patch 6 adds UCI table for coresight CPU debug module.

NOTE: All the dependent patches are applied in the below tree,
the first 12 commits represent the dependent patches.

Patch 1 and 4 depends on below AOSS QMP, AMBA bus pclk and address cell change:

Patch 2 depends on MSM8998 rpm clocks and rpmcc nodes:

Patch 5 and 6 depends on UCI support by Mike Leach:

This patch series has been tested on SDM845 MTP and MSM8996
based Dragonboard 820c and MSM8998 MTP.

* Update the UCI table with the new macro introduced by
* Rebase on top of coresight-next and provide a tree with
all the dependent patches applied.

* Added coresight support for MSM8998.
* Added ETM PIDs for SDM845 and MSM8996 as suggested
by Suzuki.
* Added UCI table for Coresight CPU debug module.

* Mask out the minor version as suggested by Mathieu.
* Added the dependent patch description in patch 1.

* Added arm,scatter-gather property as suggested by Suzuki.

* Added coresight support for msm8996 based on Vivek's patch.
Cleaned up and added coresight cpu debug nodes for msm8996.
* Merged coresight dtsi file into sdm845.dtsi as suggested by Bjorn
* Addressed Mathieu's feedback about masking the minor version in
etm4_arch_supported() and added a comment for reason to bypass
the AMBA bus discovery method.

Sai Prakash Ranjan (5):
arm64: dts: qcom: sdm845: Add Coresight support
arm64: dts: qcom: msm8998: Add Coresight support
coresight: etm4x: Add support to enable ETMv4.2
coresight: etm4x: Add ETM PIDs for SDM845 and MSM8996
coresight: debug: Add Unique Component Identifier (UCI) table

Vivek Gautam (1):
arm64: dts: qcom: msm8996: Add Coresight support

arch/arm64/boot/dts/qcom/msm8996.dtsi | 434 +++++++++++++++++
arch/arm64/boot/dts/qcom/msm8998.dtsi | 435 ++++++++++++++++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 434 +++++++++++++++++
.../hwtracing/coresight/coresight-cpu-debug.c | 33 +-
drivers/hwtracing/coresight/coresight-etm4x.c | 17 +-
5 files changed, 1330 insertions(+), 23 deletions(-)

QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

 \ /
  Last update: 2019-01-31 15:23    [W:0.122 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site