[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v2 0/2] USB SS PHY for Qualcomm's QCS404
On Tue, Jan 29, 2019 at 12:35:13PM +0100, Jorge Ramirez-Ortiz wrote:
> This set adds USB SS PHY support to Qualcomm's QCS404 SoC
> The PHY is implemented using Synopsys SS PHY 1.0.0 IP
> The code is losely based on Sriharsha Allenki's
> <> original implementation.
> v2:
> enable OTG mode detection
> move vdd voltage levels to driver
> use bulk_ control interfaces
> ss-phy-bindings [1]
> [1] ss-phy-binding discussion:
> - qcom,dwc3-ss-usb-phy exist for a generic usb2/usb3 phy driver that
> was never merged. Rather than trying to re-use these bindings (or
> delete them) I propose that we go ahead with the new separate
> bindings for HS and SS: if not now - investigation in progress- in
> the future it might be possible to have again a common phy driver
> for which these old bindings would be the binding agreement.

Either use/extend the old binding or remove it if it is not being used.


 \ /
  Last update: 2019-01-30 20:58    [W:0.132 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site