lkml.org 
[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH RFC 1/3] dt-bindings: hwmon: Add tachometer interrupt to pwm-fan
Date
This adds the tachometer interrupt to the pwm-fan binding, which is
necessary for RPM support.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
Documentation/devicetree/bindings/hwmon/pwm-fan.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
index 49ca5d8..7f69b0b 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
@@ -8,6 +8,9 @@ Required properties:

Optional properties:
- fan-supply : phandle to the regulator that provides power to the fan
+- interrupts : contains a single interrupt specifier which describes the
+ tachometer pin output of a 2 pulse-per-revolution fan.
+ See interrupt-controller/interrupts.txt for the format.

Example:
fan0: pwm-fan {
--
2.7.4
\
 
 \ /
  Last update: 2019-01-30 16:08    [W:0.078 / U:3.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site