lkml.org 
[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ARM: socfpga: fix base address of SDR controller
On Tue, Jan 29, 2019 at 11:31 PM Alan Tull <atull@kernel.org> wrote:
>
> On Tue, Jan 29, 2019 at 2:09 PM Simon Goldschmidt
> <simon.k.r.goldschmidt@gmail.com> wrote:
>
> Hi Simon,
>
> Thanks for submitting. A couple of things...
>
> > diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> > index f365003f0..8f6c1a5d6 100644
> > --- a/arch/arm/boot/dts/socfpga.dtsi
> > +++ b/arch/arm/boot/dts/socfpga.dtsi
> > @@ -788,9 +788,9 @@
> > reg = <0xfffec000 0x100>;
> > };
> >
> > - sdr: sdr@ffc25000 {
> > + sdr: sdr@ffc20000 {
> > compatible = "altr,sdr-ctl", "syscon";
> > - reg = <0xffc25000 0x1000>;
> > + reg = <0xffc20000 0x6000>;
>
> The binding doc will also need this change (in a separate patch)
> Documentation/devicetree/bindings/arm/altera/socfpga-sdram-controller.txt

Right. I didn't realise there is an actual address in that file as it says
"Example"...

But I'll make sure to change that if this patch is accepted.

>
> > diff --git a/arch/arm/mach-socfpga/self-refresh.S b/arch/arm/mach-socfpga/self-refresh.S
> > index f2d7f883e..bd7759357 100644
> > --- a/arch/arm/mach-socfpga/self-refresh.S
> > +++ b/arch/arm/mach-socfpga/self-refresh.S
> > @@ -19,8 +19,8 @@
> > #define MAX_LOOP_COUNT 1000
> >
> > /* Register offset */
> > -#define SDR_CTRLGRP_LOWPWREQ_ADDR 0x54
> > -#define SDR_CTRLGRP_LOWPWRACK_ADDR 0x58
> > +#define SDR_CTRLGRP_LOWPWREQ_ADDR 0x5054
> > +#define SDR_CTRLGRP_LOWPWRACK_ADDR 0x5058
>
> These offsets are used for ldr/sdr and are limited to 12 bits. This
> won't build if CONFIG_SOCFPGA_SUSPEND is enabled.
>
> /home/atull/repos/linux-socfpga/arch/arm/mach-socfpga/self-refresh.S:
> Assembler messages:
> /home/atull/repos/linux-socfpga/arch/arm/mach-socfpga/self-refresh.S:65:
> Error: bad immediate value for offset (20564)
> /home/atull/repos/linux-socfpga/arch/arm/mach-socfpga/self-refresh.S:67:
> Error: bad immediate value for offset (20564)
> /home/atull/repos/linux-socfpga/arch/arm/mach-socfpga/self-refresh.S:72:
> Error: bad immediate value for offset (20568)
> /home/atull/repos/linux-socfpga/arch/arm/mach-socfpga/self-refresh.S:101:
> Error: bad immediate value for offset (20564)
> /home/atull/repos/linux-socfpga/arch/arm/mach-socfpga/self-refresh.S:103:
> Error: bad immediate value for offset (20564)
> /home/atull/repos/linux-socfpga/arch/arm/mach-socfpga/self-refresh.S:108:
> Error: bad immediate value for offset (20568)
> /home/atull/repos/linux-socfpga/scripts/Makefile.build:367: recipe for
> target 'arch/arm/mach-socfpga/self-refresh.o' failed

Oops, you're right. Sorry for that. I just saw now that socfpga_defconfig
leaves CONFIG_SOCFPGA_SUSPEND inactive. I'll make sure to test that if it
comes to v2 (depending on the discussion).

Thanks,
Simon

\
 
 \ /
  Last update: 2019-01-30 07:09    [W:0.095 / U:0.660 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site