lkml.org 
[lkml]   [2019]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 01/10] ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
Date
The Bananapi M2+ uses a GPIO line to change the effective resistance of
the CPU supply regulator's feedback resistor network. The voltages
described in the device tree were given directly by the vendor. This
turns out to be slightly off compared to the real values.

The updated voltages are based on calculations of the feedback resistor
network, and verified down to three decimal places with a multi-meter.

Fixes: 6eeb4180d4b9 ("ARM: dts: sunxi: h3-h5: Add Bananapi M2+ v1.2 device trees")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
index 53edd1faee99..a567567763f4 100644
--- a/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
+++ b/arch/arm/boot/dts/sunxi-bananapi-m2-plus-v1.2.dtsi
@@ -16,13 +16,13 @@
regulator-type = "voltage";
regulator-boot-on;
regulator-always-on;
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1300000>;
+ regulator-min-microvolt = <1108475>;
+ regulator-max-microvolt = <1308475>;
regulator-ramp-delay = <50>; /* 4ms */
gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */
gpios-states = <0x1>;
- states = <1100000 0x0
- 1300000 0x1>;
+ states = <1108475 0x0
+ 1308475 0x1>;
};
};

--
2.20.1
\
 
 \ /
  Last update: 2019-01-30 09:43    [W:0.053 / U:29.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site