lkml.org 
[lkml]   [2019]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 4/8] dt-bindings: devfreq: add DMC device description
On Mon, 28 Jan 2019 at 20:21, Lukasz Luba <l.luba@partner.samsung.com> wrote:
>
> The patch adds description for DT binding for a new Exynos5 Dynamic Memory
> Controller device.
> It also contains needed MAINTAINERS file updates.
>
> CC: MyungJoo Ham <myungjoo.ham@samsung.com>
> CC: Kyungmin Park <kyungmin.park@samsung.com>
> CC: Chanwoo Choi <cw00.choi@samsung.com>
> CC: Rob Herring <robh+dt@kernel.org>
> CC: Mark Rutland <mark.rutland@arm.com>
> CC: Kukjin Kim <kgene@kernel.org>
> CC: Krzysztof Kozlowski <krzk@kernel.org>
> CC: linux-pm@vger.kernel.org
> CC: linux-samsung-soc@vger.kernel.org
> CC: devicetree@vger.kernel.org
> CC: linux-arm-kernel@lists.infradead.org
> CC: linux-kernel@vger.kernel.org
> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
> ---
> .../devicetree/bindings/devfreq/exynos5-dmc.txt | 108 +++++++++++++++++++++
> MAINTAINERS | 7 ++
> 2 files changed, 115 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/devfreq/exynos5-dmc.txt
>
> diff --git a/Documentation/devicetree/bindings/devfreq/exynos5-dmc.txt b/Documentation/devicetree/bindings/devfreq/exynos5-dmc.txt
> new file mode 100644
> index 0000000..914bd85
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/devfreq/exynos5-dmc.txt
> @@ -0,0 +1,108 @@
> +* Exynos5 frequency and voltage scaling for Dynamic Memory Controller device
> +
> +The Samsung Exynos5 SoC has DMC (Dynamic Memory Controller) to which the DRAM
> +memory chips are connected. The driver is to monitor the controller in runtime
> +and switch frequency and voltage. To monitor the usage of the controller in
> +runtime, the driver uses the PPMU (Platform Performance Monitoring Unit), which
> +is able to measure the current load of the memory.
> +When 'userspace' governor is used for the driver, an application is able to
> +switch the DMC frequency.
> +
> +Required properties for DMC device for Exynos5422:
> +- compatible: Should be "samsung,exynos5422-bus".
> +- clock-names : the name of clock used by the bus, "bus".
> +- clocks : phandles for clock specified in "clock-names" property.
> +- devfreq-events : phandles for PPMU devices connected to this DMC.
> +
> +The example definition of a DMC and PPMU devices declared in DT is shown below:
> +
> + ppmu_dmc0_0: ppmu_dmc0_0@10d00000 {
> + compatible = "samsung,exynos-ppmu";
> + reg = <0x10d00000 0x2000>;
> + clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
> + clock-names = "ppmu";
> + status = "okay";
> + events {
> + ppmu_event_dmc0_0: ppmu-event3-dmc0_0 {
> + event-name = "ppmu-event3-dmc0_0";
> + };
> + };
> + };
> +
> +
> + ppmu_dmc0_1: ppmu_dmc0_1@10d10000 {
> + compatible = "samsung,exynos-ppmu";
> + reg = <0x10d10000 0x2000>;
> + clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
> + clock-names = "ppmu";
> + status = "okay";
> + events {
> + ppmu_event_dmc0_1: ppmu-event3-dmc0_1 {
> + event-name = "ppmu-event3-dmc0_1";
> + };
> + };
> + };
> +
> + ppmu_dmc1_0: ppmu_dmc1_0@10d10000 {
> + compatible = "samsung,exynos-ppmu";
> + reg = <0x10d60000 0x2000>;
> + clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
> + clock-names = "ppmu";
> + status = "okay";
> + events {
> + ppmu_event_dmc1_0: ppmu-event3-dmc1_0 {
> + event-name = "ppmu-event3-dmc1_0";
> + };
> + };
> + };
> +
> + ppmu_dmc1_1: ppmu_dmc1_1@10d70000 {
> + compatible = "samsung,exynos-ppmu";
> + reg = <0x10d70000 0x2000>;
> + clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
> + clock-names = "ppmu";
> + status = "okay";
> + events {
> + ppmu_event_dmc1_1: ppmu-event3-dmc1_1 {
> + event-name = "ppmu-event3-dmc1_1";
> + };
> + };
> + };
> +
> + dmc: dmc@10c20000 {
> + compatible = "samsung,exynos5422-dmc";
> + reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>,
> + <0x10030000 0x1000>, <0x10000000 0x1000>;
> + clocks = <&clock CLK_FOUT_SPLL>,
> + <&clock CLK_MOUT_SCLK_SPLL>,
> + <&clock CLK_FF_DOUT_SPLL2>,
> + <&clock CLK_FOUT_BPLL>,
> + <&clock CLK_MOUT_BPLL>,
> + <&clock CLK_SCLK_BPLL>,
> + <&clock CLK_MOUT_MX_MSPLL_CCORE>,
> + <&clock CLK_MOUT_MX_MSPLL_CCORE_PHY>,
> + <&clock CLK_MOUT_MCLK_CDREX>,
> + <&clock CLK_DOUT_CLK2X_PHY0>,
> + <&clock CLK_CLKM_PHY0>,
> + <&clock CLK_CLKM_PHY1>
> + ;

Join with previous line.

> + clock-names = "fout_spll",
> + "mout_sclk_spll",
> + "ff_dout_spll2",
> + "fout_bpll",
> + "mout_bpll",
> + "sclk_bpll",
> + "mout_mx_mspll_ccore",
> + "mout_mx_mspll_ccore_phy",
> + "mout_mclk_cdrex",
> + "dout_clk2x_phy0",
> + "clkm_phy0",
> + "clkm_phy1"
> + ;

Ditto.

> +
> + status = "okay";
> + devfreq-events = <&ppmu_dmc0_0>, <&ppmu_dmc0_1>,
> + <&ppmu_dmc1_0>, <&ppmu_dmc1_1>;
> + };
> +
> +
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 9f64f8d..3581807 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3310,6 +3310,13 @@ S: Maintained
> F: drivers/devfreq/exynos-bus.c
> F: Documentation/devicetree/bindings/devfreq/exynos-bus.txt
>
> +DMC FREQUENCY DRIVER FOR SAMSUNG EXYNOS5
> +M: Lukasz Luba <l.luba@partner.samsung.com>
> +L: linux-pm@vger.kernel.org
> +L: linux-samsung-soc@vger.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/devfreq/exynos5-dmc.txt

Maintainers change should go with the next change, I think. It looks
unusual to add an entry for driver... without the driver.

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2019-01-29 15:48    [W:0.079 / U:63.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site