lkml.org 
[lkml]   [2019]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.20 028/117] USB: serial: ftdi_sio: fix GPIO not working in autosuspend
Date
4.20-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Karoly Pados <pados@pados.hu>

commit a8eda9fa1bd84065b75bfa81bf675a7af9055478 upstream.

There is a bug in the current GPIO code for ftdi_sio: it failed to take USB
autosuspend into account. If the device is in autosuspend, calls to
usb_control_msg() fail with -EHOSTUNREACH. Because the standard value for
autosuspend timeout is usually 2-5 seconds, this made it almost impossible
to use the GPIOs on machines that have USB autosuspend enabled. This patch
fixes the issue by acquiring a PM lock on the device for the duration of
the USB transfers. Tested on an FT231X device.

Signed-off-by: Karoly Pados <pados@pados.hu>
[ johan: simplify code somewhat ]
Fixes: ba93cc7da896 ("USB: serial: ftdi_sio: implement GPIO support for FT-X devices")
Cc: stable <stable@vger.kernel.org> # 4.20
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/usb/serial/ftdi_sio.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1783,6 +1783,10 @@ static int ftdi_set_bitmode(struct usb_s
int result;
u16 val;

+ result = usb_autopm_get_interface(serial->interface);
+ if (result)
+ return result;
+
val = (mode << 8) | (priv->gpio_output << 4) | priv->gpio_value;
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev, 0),
@@ -1795,6 +1799,8 @@ static int ftdi_set_bitmode(struct usb_s
val, result);
}

+ usb_autopm_put_interface(serial->interface);
+
return result;
}

@@ -1846,9 +1852,15 @@ static int ftdi_read_cbus_pins(struct us
unsigned char *buf;
int result;

+ result = usb_autopm_get_interface(serial->interface);
+ if (result)
+ return result;
+
buf = kmalloc(1, GFP_KERNEL);
- if (!buf)
+ if (!buf) {
+ usb_autopm_put_interface(serial->interface);
return -ENOMEM;
+ }

result = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
@@ -1863,6 +1875,7 @@ static int ftdi_read_cbus_pins(struct us
}

kfree(buf);
+ usb_autopm_put_interface(serial->interface);

return result;
}

\
 
 \ /
  Last update: 2019-01-29 13:09    [W:0.376 / U:9.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site