lkml.org 
[lkml]   [2019]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3] HID: i2c-hid: Ignore input report if there's no data present on Elan touchpanels
On Mon, Jan 21, 2019 at 4:30 AM Kai-Heng Feng
<kai.heng.feng@canonical.com> wrote:
>
>
>
> > On Jan 18, 2019, at 23:50, Benjamin Tissoires <benjamin.tissoires@redhat.com> wrote:
> >
> > Hi Kai-Heng,
> >
> > On Mon, Jan 7, 2019 at 8:24 AM Kai-Heng Feng
> > <kai.heng.feng@canonical.com> wrote:
> >>
> >> While using Elan touchpads, the message floods:
> >> [ 136.138487] i2c_hid i2c-DELL08D6:00: i2c_hid_get_input: incomplete report (14/65535)
> >>
> >> Though the message flood is annoying, the device it self works without
> >> any issue. I suspect that the device in question takes too much time to
> >> pull the IRQ back to high after I2C host has done reading its data.
> >>
> >> Since the host receives all useful data, let's ignore the input report
> >> when there's no data.
> >>
> >> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
> >
> > Thanks for the v3.
> >
> > This patch has just been brought to my attention, and I have one
> > question before applying it:
> > are those messages (without your patch) occurring all the time, or
> > just after resume?
>
> All the time.
>
> The touchpad works fine though. The entire report is 0xff, so it can be
> safely ignored.

Couple of things:
- I have forgotten to tell you that I have applied this patch in
for-5.1/i2c-hid, it will be pushed to linux-next today.
- Dell told me that a BIOS fix was solving the issue. We can still
quarry the patch, but there should not be a strong need for it when
users upgrade their BIOS.

Cheers,
Benjamin

>
> >
> > I wonder if the pm_suspend delay we talked about in the other thread
> > would fix that issue in a cleaner way.
>
> I’ve replied in another thread, unfortunately it can’t.
>
> We can introduce msleep() between each commands though, but I don’t
> think it’s good either.
>
> Kai-Heng
>
> >
> > Cheers,
> > Benjamin
> >
> >> ---
> >> v3:
> >> Fix compiler error/warnings.
> >>
> >> v2:
> >> Use dev_warn_once() to warn the user about the situation.
> >>
> >> drivers/hid/i2c-hid/i2c-hid-core.c | 9 +++++++++
> >> 1 file changed, 9 insertions(+)
> >>
> >> diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
> >> index 8555ce7e737b..2f940c1de616 100644
> >> --- a/drivers/hid/i2c-hid/i2c-hid-core.c
> >> +++ b/drivers/hid/i2c-hid/i2c-hid-core.c
> >> @@ -50,6 +50,7 @@
> >> #define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
> >> #define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2)
> >> #define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3)
> >> +#define I2C_HID_QUIRK_BOGUS_IRQ BIT(4)
> >>
> >> /* flags */
> >> #define I2C_HID_STARTED 0
> >> @@ -179,6 +180,8 @@ static const struct i2c_hid_quirks {
> >> I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
> >> { USB_VENDOR_ID_LG, I2C_DEVICE_ID_LG_8001,
> >> I2C_HID_QUIRK_NO_RUNTIME_PM },
> >> + { USB_VENDOR_ID_ELAN, HID_ANY_ID,
> >> + I2C_HID_QUIRK_BOGUS_IRQ },
> >> { 0, 0 }
> >> };
> >>
> >> @@ -503,6 +506,12 @@ static void i2c_hid_get_input(struct i2c_hid *ihid)
> >> return;
> >> }
> >>
> >> + if (ihid->quirks & I2C_HID_QUIRK_BOGUS_IRQ && ret_size == 0xffff) {
> >> + dev_warn_once(&ihid->client->dev, "%s: IRQ triggered but "
> >> + "there's no data\n", __func__);
> >> + return;
> >> + }
> >> +
> >> if ((ret_size > size) || (ret_size < 2)) {
> >> dev_err(&ihid->client->dev, "%s: incomplete report (%d/%d)\n",
> >> __func__, size, ret_size);
> >> --
> >> 2.17.1
> >>
>

\
 
 \ /
  Last update: 2019-01-29 11:07    [W:0.052 / U:8.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site