lkml.org 
[lkml]   [2019]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 10/10] venus: dec: make decoder compliant with stateful codec API
On Tue, Jan 29, 2019 at 1:28 AM Stanimir Varbanov
<stanimir.varbanov@linaro.org> wrote:
>
> Hi Tomasz,
>
> On 1/28/19 9:38 AM, Tomasz Figa wrote:
> > On Fri, Jan 25, 2019 at 7:25 PM Stanimir Varbanov
> > <stanimir.varbanov@linaro.org> wrote:
> >>
> >> Hi Tomasz,
> >>
> >> Thanks for the comments!
> >>
> >> On 1/25/19 9:59 AM, Tomasz Figa wrote:
> >>> .Hi Stan,
> >>>
> >>> On Fri, Jan 18, 2019 at 1:21 AM Stanimir Varbanov
> >>> <stanimir.varbanov@linaro.org> wrote:
> >>>>
> >>>> This refactored code for start/stop streaming vb2 operations and
> >>>> adds a state machine handling similar to the one in stateful codec
> >>>> API documentation. One major change is that now the HFI session is
> >>>> started on STREAMON(OUTPUT) and stopped on REQBUF(OUTPUT,count=0),
> >>>> during that time streamoff(cap,out) just flush buffers but doesn't
> >>>> stop the session. The other major change is that now the capture
> >>>> and output queues are completely separated.
> >>>>
> >>>> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
> >>>> ---
> >>>> drivers/media/platform/qcom/venus/core.h | 20 +-
> >>>> drivers/media/platform/qcom/venus/helpers.c | 23 +-
> >>>> drivers/media/platform/qcom/venus/helpers.h | 5 +
> >>>> drivers/media/platform/qcom/venus/vdec.c | 449 ++++++++++++++++----
> >>>> 4 files changed, 389 insertions(+), 108 deletions(-)
> >>>>
> >>>
> >>> Thanks for the patch! Please see some comments inline.
> >>>
> >>>> diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
> >>>> index 79c7e816c706..5a133c203455 100644
> >>>> --- a/drivers/media/platform/qcom/venus/core.h
> >>>> +++ b/drivers/media/platform/qcom/venus/core.h
> >>>> @@ -218,6 +218,15 @@ struct venus_buffer {
> >>>>
> >>>> #define to_venus_buffer(ptr) container_of(ptr, struct venus_buffer, vb)
> >>>>
> >>>> +#define DEC_STATE_UNINIT 0
> >>>> +#define DEC_STATE_INIT 1
> >>>> +#define DEC_STATE_CAPTURE_SETUP 2
> >>>> +#define DEC_STATE_STOPPED 3
> >>>> +#define DEC_STATE_SEEK 4
> >>>> +#define DEC_STATE_DRAIN 5
> >>>> +#define DEC_STATE_DECODING 6
> >>>> +#define DEC_STATE_DRC 7
> >>>> +
> >>>> /**
> >>>> * struct venus_inst - holds per instance paramerters
> >>>> *
> >>>> @@ -241,6 +250,10 @@ struct venus_buffer {
> >>>> * @colorspace: current color space
> >>>> * @quantization: current quantization
> >>>> * @xfer_func: current xfer function
> >>>> + * @codec_state: current codec API state (see DEC/ENC_STATE_)
> >>>> + * @reconf_wait: wait queue for resolution change event
> >>>> + * @ten_bits: does new stream is 10bits depth
> >>>> + * @buf_count: used to count number number of buffers (reqbuf(0))
> >>>> * @fps: holds current FPS
> >>>> * @timeperframe: holds current time per frame structure
> >>>> * @fmt_out: a reference to output format structure
> >>>> @@ -255,8 +268,6 @@ struct venus_buffer {
> >>>> * @opb_buftype: output picture buffer type
> >>>> * @opb_fmt: output picture buffer raw format
> >>>> * @reconfig: a flag raised by decoder when the stream resolution changed
> >>>> - * @reconfig_width: holds the new width
> >>>> - * @reconfig_height: holds the new height
> >>>> * @hfi_codec: current codec for this instance in HFI space
> >>>> * @sequence_cap: a sequence counter for capture queue
> >>>> * @sequence_out: a sequence counter for output queue
> >>>> @@ -296,6 +307,9 @@ struct venus_inst {
> >>>> u8 ycbcr_enc;
> >>>> u8 quantization;
> >>>> u8 xfer_func;
> >>>> + unsigned int codec_state;
> >>>> + wait_queue_head_t reconf_wait;
> >>>> + int buf_count;
> >>>> u64 fps;
> >>>> struct v4l2_fract timeperframe;
> >>>> const struct venus_format *fmt_out;
> >>>> @@ -310,8 +324,6 @@ struct venus_inst {
> >>>> u32 opb_buftype;
> >>>> u32 opb_fmt;
> >>>> bool reconfig;
> >>>> - u32 reconfig_width;
> >>>> - u32 reconfig_height;
> >>>> u32 hfi_codec;
> >>>> u32 sequence_cap;
> >>>> u32 sequence_out;
> >>>> diff --git a/drivers/media/platform/qcom/venus/helpers.c b/drivers/media/platform/qcom/venus/helpers.c
> >>>> index 637ce7b82d94..25d8cceccae4 100644
> >>>> --- a/drivers/media/platform/qcom/venus/helpers.c
> >>>> +++ b/drivers/media/platform/qcom/venus/helpers.c
> >>>> @@ -1030,16 +1030,15 @@ void venus_helper_vb2_buf_queue(struct vb2_buffer *vb)
> >>>>
> >>>> v4l2_m2m_buf_queue(m2m_ctx, vbuf);
> >>>>
> >>>> - if (!(inst->streamon_out & inst->streamon_cap))
> >>>> - goto unlock;
> >>>> -
> >>>> - ret = is_buf_refed(inst, vbuf);
> >>>> - if (ret)
> >>>> - goto unlock;
> >>>> + if (IS_OUT(vb->vb2_queue, inst) || IS_CAP(vb->vb2_queue, inst)) {
> >>>
> >>> Wouldn't a simple vb2_is_streaming() work here?
> >>
> >> I'd say no, because the buffer can be queued but the streaming on that
> >> queue isn't started yet. The idea is to send buffers to firmware only
> >> when the streaming is on on that queue,
> >
> > Isn't it exactly what vb2_is_streaming(vb->vb2_queue) would check?
>
> Not exactly, q->streaming is set when user call STREAMON but most of the
> logic is in vb2::start_streaming, but start_streaming is called on first
> QBUF (see q->start_streaming_called flag).
>

Unless you set q->min_buffers_needed to 0.

[snip]

> >>>> +
> >>>> struct venus_inst;
> >>>> struct venus_core;
> >>>>
> >>>> diff --git a/drivers/media/platform/qcom/venus/vdec.c b/drivers/media/platform/qcom/venus/vdec.c
> >>>> index 7a9370df7515..306e0f7d3337 100644
> >>>> --- a/drivers/media/platform/qcom/venus/vdec.c
> >>>> +++ b/drivers/media/platform/qcom/venus/vdec.c
> >>>> @@ -201,28 +201,18 @@ static int vdec_g_fmt(struct file *file, void *fh, struct v4l2_format *f)
> >>>> struct venus_inst *inst = to_inst(file);
> >>>> const struct venus_format *fmt = NULL;
> >>>> struct v4l2_pix_format_mplane *pixmp = &f->fmt.pix_mp;
> >>>> + int ret;
> >>>>
> >>>> if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
> >>>> fmt = inst->fmt_cap;
> >>>> else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> >>>> fmt = inst->fmt_out;
> >>>>
> >>>> - if (inst->reconfig) {
> >>>> - struct v4l2_format format = {};
> >>>> -
> >>>> - inst->out_width = inst->reconfig_width;
> >>>> - inst->out_height = inst->reconfig_height;
> >>>> - inst->reconfig = false;
> >>>> -
> >>>> - format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
> >>>> - format.fmt.pix_mp.pixelformat = inst->fmt_cap->pixfmt;
> >>>> - format.fmt.pix_mp.width = inst->out_width;
> >>>> - format.fmt.pix_mp.height = inst->out_height;
> >>>> -
> >>>> - vdec_try_fmt_common(inst, &format);
> >>>> -
> >>>> - inst->width = format.fmt.pix_mp.width;
> >>>> - inst->height = format.fmt.pix_mp.height;
> >>>> + if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
> >>>> + ret = wait_event_timeout(inst->reconf_wait, inst->reconfig,
> >>>> + msecs_to_jiffies(100));
> >>>> + if (!ret)
> >>>> + return -EINVAL;
> >>>
> >>> Nope, that's not what is expected to happen here. Especially since
> >>> you're potentially in non-blocking IO mode. Regardless of that, the
> >>
> >> OK, how to handle that when userspace (for example gstreamer) hasn't
> >> support for v4l2 events? The s5p-mfc decoder is doing the same sleep in
> >> g_fmt.
> >
> > I don't think that sleep in s5p-mfc was needed for gstreamer and
> > AFAICT other drivers don't have it. Doesn't gstreamer just set the
> > coded format on OUTPUT queue on its own? That should propagate the
> > format to the CAPTURE queue, without the need to parse the stream.
>
> I'm pretty sure that this is the case in gstreamer, I've CCed Nicolas
> for his opinion.
>
> In regard to this, I make it Venus changes to always set to the firmware
> the minimum supported resolution so that it always send to v4l2 driver
> the actual resolution and propagate that through v4l2 event to the
> userspace.
>

So, if I got it correctly, that would match the behavior I described
above, right?

> >
> >>
> >>> driver should check if the format information is ready and if not,
> >>> just fail with -EACCESS here.
> >>
> >> I already commented that on Alex's reply.
> >>
> >>>
> >>>> }
> >>>>
> >>>> pixmp->pixelformat = fmt->pixfmt;
> >>>> @@ -457,6 +447,10 @@ vdec_try_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *cmd)
> >>>> if (cmd->flags & V4L2_DEC_CMD_STOP_TO_BLACK)
> >>>> return -EINVAL;
> >>>> break;
> >>>> + case V4L2_DEC_CMD_START:
> >>>> + if (cmd->flags & V4L2_DEC_CMD_START_MUTE_AUDIO)
> >>>> + return -EINVAL;
> >>>
> >>> We don't support any flags here. You can just check if flags != 0.
> >>> (and similarly for STOP above)
> >>
> >> OK.
> >>
> >>>
> >>>> + break;
> >>>> default:
> >>>> return -EINVAL;
> >>>> }
> >>>> @@ -477,18 +471,23 @@ vdec_decoder_cmd(struct file *file, void *fh, struct v4l2_decoder_cmd *cmd)
> >>>>
> >>>> mutex_lock(&inst->lock);
> >>>>
> >>>> - /*
> >>>> - * Implement V4L2_DEC_CMD_STOP by enqueue an empty buffer on decoder
> >>>> - * input to signal EOS.
> >>>> - */
> >>>> - if (!(inst->streamon_out & inst->streamon_cap))
> >>>> - goto unlock;
> >>>> + if (cmd->cmd == V4L2_DEC_CMD_STOP) {
> >>>> + /*
> >>>> + * Implement V4L2_DEC_CMD_STOP by enqueue an empty buffer on
> >>>> + * decoder input to signal EOS.
> >>>> + */
> >>>> + if (!(inst->streamon_out & inst->streamon_cap))
> >>>
> >>> Although & should technically work, I think you want && here.
> >>
> >> Both are fine in this case.
> >>
> >
> > Sorry for being picky, but they're fine in terms of whether they work
> > or not, but not code quality. We're clearly checking for a logical
> > conjunction of two boolean conditions and && is the right operator to
> > do it. Especially since streamon_out and streamon_cap are plain
> > integers, not stdbool (which would guarantee that the true values of
> > both are always the same).
>
> OK, will change that to logical AND.
>
> >
> >>>
> >>>> + goto unlock;
> >>>>
> >>>> - fdata.buffer_type = HFI_BUFFER_INPUT;
> >>>> - fdata.flags |= HFI_BUFFERFLAG_EOS;
> >>>> - fdata.device_addr = 0xdeadbeef;
> >>>> + fdata.buffer_type = HFI_BUFFER_INPUT;
> >>>> + fdata.flags |= HFI_BUFFERFLAG_EOS;
> >>>> + fdata.device_addr = 0xdeadb000;
> >>>>
> >>>> - ret = hfi_session_process_buf(inst, &fdata);
> >>>> + ret = hfi_session_process_buf(inst, &fdata);
> >>>> +
> >>>> + if (!ret && inst->codec_state == DEC_STATE_DECODING)
> >>>> + inst->codec_state = DEC_STATE_DRAIN;
> >>>> + }
> >>>>
> >>>> unlock:
> >>>> mutex_unlock(&inst->lock);
> >>>> @@ -649,20 +648,18 @@ static int vdec_output_conf(struct venus_inst *inst)
> >>>> return 0;
> >>>> }
> >>>>
> >>>> -static int vdec_init_session(struct venus_inst *inst)
> >>>> +static int vdec_session_init(struct venus_inst *inst)
> >>>> {
> >>>> int ret;
> >>>>
> >>>> ret = hfi_session_init(inst, inst->fmt_out->pixfmt);
> >>>> - if (ret)
> >>>> + if (ret == -EINVAL)
> >>>> + return 0;
> >>>> + else if (ret)
> >>>> return ret;
> >>>>
> >>>> - ret = venus_helper_set_input_resolution(inst, inst->out_width,
> >>>> - inst->out_height);
> >>>> - if (ret)
> >>>> - goto deinit;
> >>>> -
> >>>> - ret = venus_helper_set_color_format(inst, inst->fmt_cap->pixfmt);
> >>>> + ret = venus_helper_set_input_resolution(inst, frame_width_min(inst),
> >>>> + frame_height_min(inst));
> >>>> if (ret)
> >>>> goto deinit;
> >>>>
> >>>> @@ -681,26 +678,19 @@ static int vdec_num_buffers(struct venus_inst *inst, unsigned int *in_num,
> >>>>
> >>>> *in_num = *out_num = 0;
> >>>>
> >>>> - ret = vdec_init_session(inst);
> >>>> - if (ret)
> >>>> - return ret;
> >>>> -
> >>>> ret = venus_helper_get_bufreq(inst, HFI_BUFFER_INPUT, &bufreq);
> >>>> if (ret)
> >>>> - goto deinit;
> >>>> + return ret;
> >>>>
> >>>> *in_num = HFI_BUFREQ_COUNT_MIN(&bufreq, ver);
> >>>>
> >>>> ret = venus_helper_get_bufreq(inst, HFI_BUFFER_OUTPUT, &bufreq);
> >>>> if (ret)
> >>>> - goto deinit;
> >>>> + return ret;
> >>>>
> >>>> *out_num = HFI_BUFREQ_COUNT_MIN(&bufreq, ver);
> >>>>
> >>>> -deinit:
> >>>> - hfi_session_deinit(inst);
> >>>> -
> >>>> - return ret;
> >>>> + return 0;
> >>>> }
> >>>>
> >>>> static int vdec_queue_setup(struct vb2_queue *q,
> >>>> @@ -733,6 +723,10 @@ static int vdec_queue_setup(struct vb2_queue *q,
> >>>> return 0;
> >>>> }
> >>>>
> >>>> + ret = vdec_session_init(inst);
> >>>> + if (ret)
> >>>> + return ret;
> >>>> +
> >>>> ret = vdec_num_buffers(inst, &in_num, &out_num);
> >>>> if (ret)
> >>>> return ret;
> >>>> @@ -758,6 +752,11 @@ static int vdec_queue_setup(struct vb2_queue *q,
> >>>> inst->output_buf_size = sizes[0];
> >>>> *num_buffers = max(*num_buffers, out_num);
> >>>> inst->num_output_bufs = *num_buffers;
> >>>> +
> >>>> + mutex_lock(&inst->lock);
> >>>> + if (inst->codec_state == DEC_STATE_CAPTURE_SETUP)
> >>>> + inst->codec_state = DEC_STATE_STOPPED;
> >>>> + mutex_unlock(&inst->lock);
> >>>> break;
> >>>> default:
> >>>> ret = -EINVAL;
> >>>> @@ -794,80 +793,298 @@ static int vdec_verify_conf(struct venus_inst *inst)
> >>>> return 0;
> >>>> }
> >>>>
> >>>> -static int vdec_start_streaming(struct vb2_queue *q, unsigned int count)
> >>>> +static int vdec_start_capture(struct venus_inst *inst)
> >>>> {
> >>>> - struct venus_inst *inst = vb2_get_drv_priv(q);
> >>>> int ret;
> >>>>
> >>>> - mutex_lock(&inst->lock);
> >>>> + if (!inst->streamon_out)
> >>>> + return -EINVAL;
> >>>>
> >>>> - if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> >>>> - inst->streamon_out = 1;
> >>>> - else
> >>>> - inst->streamon_cap = 1;
> >>>> + if (inst->codec_state == DEC_STATE_DECODING) {
> >>>> + if (inst->reconfig)
> >>>> + goto reconfigure;
> >>>>
> >>>> - if (!(inst->streamon_out & inst->streamon_cap)) {
> >>>> - mutex_unlock(&inst->lock);
> >>>> + venus_helper_queue_dpb_bufs(inst);
> >>>> + venus_helper_process_initial_cap_bufs(inst);
> >>>> + inst->streamon_cap = 1;
> >>>> return 0;
> >>>> }
> >>>>
> >>>> - venus_helper_init_instance(inst);
> >>>> + if (inst->codec_state != DEC_STATE_STOPPED)
> >>>> + return -EINVAL;
> >>>>
> >>>> - inst->reconfig = false;
> >>>> - inst->sequence_cap = 0;
> >>>> - inst->sequence_out = 0;
> >>>> +reconfigure:
> >>>> + ret = hfi_session_flush(inst, HFI_FLUSH_OUTPUT);
> >>>> + if (ret)
> >>>> + return ret;
> >>>>
> >>>> - ret = vdec_init_session(inst);
> >>>> + ret = vdec_output_conf(inst);
> >>>> if (ret)
> >>>> - goto bufs_done;
> >>>> + return ret;
> >>>> +
> >>>> + ret = venus_helper_set_num_bufs(inst, inst->num_input_bufs,
> >>>> + VB2_MAX_FRAME, VB2_MAX_FRAME);
> >>>> + if (ret)
> >>>> + return ret;
> >>>> +
> >>>> + ret = venus_helper_intbufs_realloc(inst);
> >>>> + if (ret)
> >>>> + goto err;
> >>>> +
> >>>> + ret = venus_helper_alloc_dpb_bufs(inst);
> >>>> + if (ret)
> >>>> + goto err;
> >>>> +
> >>>> + ret = venus_helper_queue_dpb_bufs(inst);
> >>>> + if (ret)
> >>>> + goto free_dpb_bufs;
> >>>> +
> >>>> + ret = venus_helper_process_initial_cap_bufs(inst);
> >>>> + if (ret)
> >>>> + goto free_dpb_bufs;
> >>>> +
> >>>> + venus_helper_load_scale_clocks(inst->core);
> >>>> +
> >>>> + ret = hfi_session_continue(inst);
> >>>> + if (ret)
> >>>> + goto free_dpb_bufs;
> >>>> +
> >>>> + inst->codec_state = DEC_STATE_DECODING;
> >>>> +
> >>>> + inst->streamon_cap = 1;
> >>>> + inst->sequence_cap = 0;
> >>>> + inst->reconfig = false;
> >>>> +
> >>>> + return 0;
> >>>> +
> >>>> +free_dpb_bufs:
> >>>> + venus_helper_free_dpb_bufs(inst);
> >>>> +err:
> >>>> + return ret;
> >>>> +}
> >>>> +
> >>>> +static int vdec_start_output(struct venus_inst *inst)
> >>>> +{
> >>>> + int ret;
> >>>> +
> >>>> + if (inst->codec_state == DEC_STATE_SEEK) {
> >>>> + ret = venus_helper_process_initial_out_bufs(inst);
> >>>> + inst->codec_state = DEC_STATE_DECODING;
> >>>> + goto done;
> >>>> + }
> >>>> +
> >>>> + if (inst->codec_state == DEC_STATE_INIT ||
> >>>> + inst->codec_state == DEC_STATE_CAPTURE_SETUP) {
> >>>> + ret = venus_helper_process_initial_out_bufs(inst);
> >>>> + goto done;
> >>>> + }
> >>>> +
> >>>> + if (inst->codec_state != DEC_STATE_UNINIT)
> >>>> + return -EINVAL;
> >>>> +
> >>>> + venus_helper_init_instance(inst);
> >>>> + inst->sequence_out = 0;
> >>>> + inst->reconfig = false;
> >>>>
> >>>> ret = vdec_set_properties(inst);
> >>>> if (ret)
> >>>> - goto deinit_sess;
> >>>> + return ret;
> >>>>
> >>>> ret = vdec_output_conf(inst);
> >>>> if (ret)
> >>>> - goto deinit_sess;
> >>>> + return ret;
> >>>>
> >>>> ret = vdec_verify_conf(inst);
> >>>> if (ret)
> >>>> - goto deinit_sess;
> >>>> + return ret;
> >>>>
> >>>> ret = venus_helper_set_num_bufs(inst, inst->num_input_bufs,
> >>>> VB2_MAX_FRAME, VB2_MAX_FRAME);
> >>>> if (ret)
> >>>> - goto deinit_sess;
> >>>> + return ret;
> >>>>
> >>>> - ret = venus_helper_alloc_dpb_bufs(inst);
> >>>> + ret = venus_helper_vb2_start_streaming(inst);
> >>>> if (ret)
> >>>> - goto deinit_sess;
> >>>> + return ret;
> >>>>
> >>>> - ret = venus_helper_vb2_start_streaming(inst);
> >>>> + ret = venus_helper_process_initial_out_bufs(inst);
> >>>> if (ret)
> >>>> - goto deinit_sess;
> >>>> + return ret;
> >>>>
> >>>> - mutex_unlock(&inst->lock);
> >>>> + inst->codec_state = DEC_STATE_INIT;
> >>>> +
> >>>> +done:
> >>>> + inst->streamon_out = 1;
> >>>> + return ret;
> >>>> +}
> >>>> +
> >>>> +static int vdec_start_streaming(struct vb2_queue *q, unsigned int count)
> >>>> +{
> >>>> + struct venus_inst *inst = vb2_get_drv_priv(q);
> >>>> + int ret;
> >>>> +
> >>>> + mutex_lock(&inst->lock);
> >>>> +
> >>>> + if (q->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
> >>>> + ret = vdec_start_capture(inst);
> >>>> + else
> >>>> + ret = vdec_start_output(inst);
> >>>>
> >>>> + if (ret)
> >>>> + goto error;
> >>>> +
> >>>> + mutex_unlock(&inst->lock);
> >>>> return 0;
> >>>>
> >>>> -deinit_sess:
> >>>> - hfi_session_deinit(inst);
> >>>> -bufs_done:
> >>>> +error:
> >>>> venus_helper_buffers_done(inst, VB2_BUF_STATE_QUEUED);
> >>>> + mutex_unlock(&inst->lock);
> >>>> + return ret;
> >>>> +}
> >>>> +
> >>>> +static void vdec_dst_buffers_done(struct venus_inst *inst,
> >>>> + enum vb2_buffer_state state)
> >>>> +{
> >>>> + struct vb2_v4l2_buffer *buf;
> >>>> +
> >>>> + while ((buf = v4l2_m2m_dst_buf_remove(inst->m2m_ctx)))
> >>>> + v4l2_m2m_buf_done(buf, state);
> >>>> +}
> >>>> +
> >>>> +static int vdec_stop_capture(struct venus_inst *inst)
> >>>> +{
> >>>> + int ret = 0;
> >>>> +
> >>>> + switch (inst->codec_state) {
> >>>> + case DEC_STATE_DECODING:
> >>>> + ret = hfi_session_flush(inst, HFI_FLUSH_ALL);
> >>>> + vdec_dst_buffers_done(inst, VB2_BUF_STATE_ERROR);
> >>>> + inst->codec_state = DEC_STATE_STOPPED;
> >>>> + break;
> >>>> + case DEC_STATE_DRAIN:
> >>>> + vdec_dst_buffers_done(inst, VB2_BUF_STATE_ERROR);
> >>>
> >>> Does this also take care of buffers that were already given to the hardware?
> >>
> >> Hmm, looks like not handling them. Looking in state machine diagram it
> >> is not clear to me what to do with those buffers. Can you clarify what
> >> are your expectations here.
> >>
> >
> > Stopping a queue must reclaim the ownership of any buffers from that
> > queue back to the kernel (and then userspace). That means that after
> > the queue is stopped, all the buffers may be actually physically
> > unmapped from the device and freed. It's not a codec interface
> > requirement, but a general vb2 principle.
>
> OK got it. When the driver is in DRAIN and STREAMOFF(CAPTURE) is called
> we have to forcibly go to STOPPED without waiting for all capture
> buffers to be decoded?

Correct.

>
> >
> >>>
> >>>> + inst->codec_state = DEC_STATE_STOPPED;
> >>>> + break;
> >>>> + case DEC_STATE_DRC:
> >>>> + ret = hfi_session_flush(inst, HFI_FLUSH_OUTPUT);
> >>>> + vdec_dst_buffers_done(inst, VB2_BUF_STATE_ERROR);
> >>>> + inst->codec_state = DEC_STATE_CAPTURE_SETUP;
> >>>> + INIT_LIST_HEAD(&inst->registeredbufs);
> >>>> + venus_helper_free_dpb_bufs(inst);
> >>>> + break;
> >>>> + default:
> >>>> + return 0;
> >>>> + }
> >>>> +
> >>>> + return ret;
> >>>> +}
> >>>> +
> >>>> +static int vdec_stop_output(struct venus_inst *inst)
> >>>> +{
> >>>> + int ret = 0;
> >>>> +
> >>>> + switch (inst->codec_state) {
> >>>> + case DEC_STATE_DECODING:
> >>>> + case DEC_STATE_DRAIN:
> >>>> + case DEC_STATE_STOPPED:
> >>>> + ret = hfi_session_flush(inst, HFI_FLUSH_ALL);
> >>>
> >>> What's exactly the behavior of this hfi_session_flush() for all the
> >>> various flush types?
> >>
> >> hfi flush function is saying to the firmware to return the buffers of
> >> particular type (ALL=input+output+output2) to the v4l2 layer via
> >> buf_done hfi operation. The buffers must be returned before we exit from
> >> hfi_session_flush.
> >>
> >
> > Okay, so then stopping the OUTPUT queue must not flush the CAPTURE
> > buffers, which I believe is what the code above is doing.
>
> Yes, that would be the ideal case but in Venus case flushing INPUT
> buffers during DECODING produces an error from firmware, so I've
> workaraounded that by flushing INPUT+OUTPUT. I don't know how to deal
> with such behaivour.

Perhaps you could requeue such CAPTURE buffers back internally in the
driver, without returning them to the application?

In any way, let me think a bit more. Maybe we can simplify this?

Best regards,
Tomasz

\
 
 \ /
  Last update: 2019-01-29 09:25    [W:0.191 / U:6.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site