lkml.org 
[lkml]   [2019]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv3 14/27] PCI: mobiveil: initialize Primary/Secondary/Subordinate bus number
Date
From: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>

The reset value is all zero, so set a workable value for Primary,
Secondary and Subordinate bus numbers.

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Minghuan Lian <Minghuan.Lian@nxp.com>
---
V3:
- No change

drivers/pci/controller/pcie-mobiveil.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/pci/controller/pcie-mobiveil.c b/drivers/pci/controller/pcie-mobiveil.c
index db7ecb021c63..9210165fe8c0 100644
--- a/drivers/pci/controller/pcie-mobiveil.c
+++ b/drivers/pci/controller/pcie-mobiveil.c
@@ -582,6 +582,12 @@ static int mobiveil_host_init(struct mobiveil_pcie *pcie)
u32 value, pab_ctrl, type;
struct resource_entry *win;

+ /* setup bus numbers */
+ value = csr_readl(pcie, PCI_PRIMARY_BUS);
+ value &= 0xff000000;
+ value |= 0x00ff0100;
+ csr_writel(pcie, value, PCI_PRIMARY_BUS);
+
/*
* program Bus Master Enable Bit in Command Register in PAB Config
* Space
--
2.17.1
\
 
 \ /
  Last update: 2019-01-29 09:10    [W:0.309 / U:4.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site