lkml.org 
[lkml]   [2019]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] mmc: atmel-mci: enable 8 bits buswidth support
Date
This patch adds support for 8-bit buswidth.
Relevant SDCR value modified.

Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
drivers/mmc/host/atmel-mci.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 47189f9ed4e2..735aa5871358 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1410,6 +1410,9 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
case MMC_BUS_WIDTH_4:
slot->sdc_reg |= ATMCI_SDCBUS_4BIT;
break;
+ case MMC_BUS_WIDTH_8:
+ slot->sdc_reg |= ATMCI_SDCBUS_8BIT;
+ break;
}

if (ios->clock) {
@@ -2275,8 +2278,11 @@ static int atmci_init_slot(struct atmel_mci *host,
* use only one bit for data to prevent fifo underruns and overruns
* which will corrupt data.
*/
- if ((slot_data->bus_width >= 4) && host->caps.has_rwproof)
+ if ((slot_data->bus_width >= 4) && host->caps.has_rwproof) {
mmc->caps |= MMC_CAP_4_BIT_DATA;
+ if (slot_data->bus_width >= 8)
+ mmc->caps |= MMC_CAP_8_BIT_DATA;
+ }

if (atmci_get_version(host) < 0x200) {
mmc->max_segs = 256;
--
2.17.1
\
 
 \ /
  Last update: 2019-01-29 17:50    [W:0.023 / U:28.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site