lkml.org 
[lkml]   [2019]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 1/9] thermal: cpu_cooling: Require thermal core to be compiled in
Date
The CPU cooling driver (cpu_cooling.c) allows the platform's cpufreq
driver to register as a cooling device and cool down the platform by
throttling the CPU frequency. In order to be able to auto-register a
cpufreq driver as a cooling device from the cpufreq core, we need access
to code inside cpu_cooling.c which, in turn, accesses code inside
thermal core.

CPU_FREQ is a bool while THERMAL is tristate. In some configurations
(e.g. allmodconfig), CONFIG_THERMAL ends up as a module while
CONFIG_CPU_FREQ is compiled in. This leads to following error:

drivers/cpufreq/cpufreq.o: In function `cpufreq_offline':
cpufreq.c:(.text+0x407c): undefined reference to `cpufreq_cooling_unregister'
drivers/cpufreq/cpufreq.o: In function `cpufreq_online':
cpufreq.c:(.text+0x70c0): undefined reference to `of_cpufreq_cooling_register'

Given that platforms using CPU_THERMAL usually want it compiled-in so it
is available early in boot, make CPU_THERMAL depend on THERMAL being
compiled-in instead of allowing it to be a module.

As a result of this change, get rid of the ugly (!CPU_THERMAL ||
THERMAL) dependency in all cpufreq drivers using CPU_THERMAL.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/cpufreq/Kconfig | 3 ---
drivers/cpufreq/Kconfig.arm | 5 -----
drivers/thermal/Kconfig | 1 +
3 files changed, 1 insertion(+), 8 deletions(-)

diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index 608af20a3494..b22e6bba71f1 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -207,8 +207,6 @@ comment "CPU frequency scaling drivers"
config CPUFREQ_DT
tristate "Generic DT based cpufreq driver"
depends on HAVE_CLK && OF
- # if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
- depends on !CPU_THERMAL || THERMAL
select CPUFREQ_DT_PLATDEV
select PM_OPP
help
@@ -327,7 +325,6 @@ endif
config QORIQ_CPUFREQ
tristate "CPU frequency scaling driver for Freescale QorIQ SoCs"
depends on OF && COMMON_CLK && (PPC_E500MC || ARM || ARM64)
- depends on !CPU_THERMAL || THERMAL
select CLK_QORIQ
help
This adds the CPUFreq driver support for Freescale QorIQ SoCs
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 688f10227793..ca8567c3152c 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -29,8 +29,6 @@ config ARM_ARMADA_37XX_CPUFREQ
config ARM_BIG_LITTLE_CPUFREQ
tristate "Generic ARM big LITTLE CPUfreq driver"
depends on ARM_CPU_TOPOLOGY && HAVE_CLK
- # if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be =y
- depends on !CPU_THERMAL || THERMAL
select PM_OPP
help
This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
@@ -38,7 +36,6 @@ config ARM_BIG_LITTLE_CPUFREQ
config ARM_SCPI_CPUFREQ
tristate "SCPI based CPUfreq driver"
depends on ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
- depends on !CPU_THERMAL || THERMAL
help
This adds the CPUfreq driver support for ARM platforms using SCPI
protocol for CPU power management.
@@ -93,7 +90,6 @@ config ARM_KIRKWOOD_CPUFREQ
config ARM_MEDIATEK_CPUFREQ
tristate "CPU Frequency scaling support for MediaTek SoCs"
depends on ARCH_MEDIATEK && REGULATOR
- depends on !CPU_THERMAL || THERMAL
select PM_OPP
help
This adds the CPUFreq driver support for MediaTek SoCs.
@@ -233,7 +229,6 @@ config ARM_SA1110_CPUFREQ
config ARM_SCMI_CPUFREQ
tristate "SCMI based CPUfreq driver"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
- depends on !CPU_THERMAL || THERMAL
select PM_OPP
help
This adds the CPUfreq driver support for ARM platforms using SCMI
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 30323426902e..58bb7d72dc2b 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -152,6 +152,7 @@ config CPU_THERMAL
bool "generic cpu cooling support"
depends on CPU_FREQ
depends on THERMAL_OF
+ depends on THERMAL=y
help
This implements the generic cpu cooling mechanism through frequency
reduction. An ACPI version of this already exists
--
2.17.1
\
 
 \ /
  Last update: 2019-01-29 05:56    [W:0.124 / U:5.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site