lkml.org 
[lkml]   [2019]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] ARM: dts: sun5i: q8-tablet: Move panel properties to correct node level
Date
The panel backlight and enable GPIO comments were incorrectly placed
in the input port, while it should have been in the panel node itself.

Move them to the correct position.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun5i-a13-q8-tablet.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
index a89f29fa3e40..3a844dae26f7 100644
--- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
+++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts
@@ -50,13 +50,13 @@

panel: panel {
compatible = "urt,umsh-8596md-t", "simple-panel";
+ /* TODO: lcd panel uses axp gpio0 as enable pin */
+ backlight = <&backlight>;
#address-cells = <1>;
#size-cells = <0>;

port@0 {
reg = <0>;
- /* TODO: lcd panel uses axp gpio0 as enable pin */
- backlight = <&backlight>;
#address-cells = <1>;
#size-cells = <0>;

--
2.20.1
\
 
 \ /
  Last update: 2019-01-27 15:49    [W:0.068 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site