lkml.org 
[lkml]   [2019]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [RFC][PATCH] Revert "ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs"
Date
Link to the full 4.19.18 config I'm using:

https://drive.google.com/open?id=1ZI3MeGB2fkYMsEjzGQYXUk2wqr0h9h7R

On Sun, 27 Jan 2019, Ioan-Adrian Ratiu <adi@adirat.com> wrote:
> This reverts commit bea8a160c621d19f7f78b13e14e03f4b8e44cd4b.
>
> Contrary to what the commit message says, on my rpi 3 b v1.2 changing
> the polarity causes the exact behaviour this commit intends to fix, as
> described at the referenced link below (wlan0 disapears).
>
> With reset-gpios = ... GPIO_ACTIVE_HIGH, brcmfmac errors in dmesg:
>
> [ 7.977512] brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110
> [ 7.977623] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
> [ 7.978007] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
> [ 7.978377] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
> [ 7.978724] brcmfmac: brcmf_sdio_dpc: failed backplane access over SDIO, halting operation
> [ 7.978734] brcmfmac: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
> [ 7.978747] brcmfmac: brcmf_cfg80211_get_channel: chanspec failed (-110)
> [ 7.982817] brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110
> [ 7.982880] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
> [ 7.983255] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
>
> The only solution I currently have is to revert and everything works
> as expected and as before changing the polarity.
>
> Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911443
> Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com>
> ---
> arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 +-
> arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
> index 93762244be7f..4adb85e66be3 100644
> --- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
> +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
> @@ -31,7 +31,7 @@
>
> wifi_pwrseq: wifi-pwrseq {
> compatible = "mmc-pwrseq-simple";
> - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
> + reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
> };
> };
>
> diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
> index 89e6fd547c75..c318bcbc6ba7 100644
> --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
> +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
> @@ -26,7 +26,7 @@
>
> wifi_pwrseq: wifi-pwrseq {
> compatible = "mmc-pwrseq-simple";
> - reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
> + reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
> };
> };
>
> --
> 2.20.1

\
 
 \ /
  Last update: 2019-01-27 21:34    [W:0.053 / U:4.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site