lkml.org 
[lkml]   [2019]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC][PATCH] Revert "ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs"
Date
This reverts commit bea8a160c621d19f7f78b13e14e03f4b8e44cd4b.

Contrary to what the commit message says, on my rpi 3 b v1.2 changing
the polarity causes the exact behaviour this commit intends to fix, as
described at the referenced link below (wlan0 disapears).

With reset-gpios = ... GPIO_ACTIVE_HIGH, brcmfmac errors in dmesg:

[ 7.977512] brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110
[ 7.977623] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
[ 7.978007] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
[ 7.978377] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
[ 7.978724] brcmfmac: brcmf_sdio_dpc: failed backplane access over SDIO, halting operation
[ 7.978734] brcmfmac: brcmf_proto_bcdc_query_dcmd: brcmf_proto_bcdc_msg failed w/status -110
[ 7.978747] brcmfmac: brcmf_cfg80211_get_channel: chanspec failed (-110)
[ 7.982817] brcmfmac: brcmf_sdio_bus_sleep: error while changing bus sleep state -110
[ 7.982880] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame
[ 7.983255] brcmfmac: brcmf_sdio_txfail: sdio error, abort command and terminate frame

The only solution I currently have is to revert and everything works
as expected and as before changing the polarity.

Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911443
Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com>
---
arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 2 +-
arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
index 93762244be7f..4adb85e66be3 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -31,7 +31,7 @@

wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
};
};

diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
index 89e6fd547c75..c318bcbc6ba7 100644
--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -26,7 +26,7 @@

wifi_pwrseq: wifi-pwrseq {
compatible = "mmc-pwrseq-simple";
- reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
};
};

--
2.20.1
\
 
 \ /
  Last update: 2019-01-27 21:29    [W:0.077 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site