lkml.org 
[lkml]   [2019]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 2/2] drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel
On Sat, Jan 26, 2019 at 1:22 AM Sam Ravnborg <sam@ravnborg.org> wrote:
>
> Hi Jagan.
>
> Looks good, only very few nits left.
>
> On Sat, Jan 26, 2019 at 12:52:33AM +0530, Jagan Teki wrote:
> > Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel.
> >
> > Add panel driver for it.
> >
> > Tested-by: Bhushan Shah <bshah@kde.org>
> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
>
> If you consider my inputs (I know you will) then you can add my:
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
>
>
> > + msleep(20);
> > +
> > + gpiod_set_value(ctx->reset, 0);
> > + /* T5 + T6 (avdd rise + video & logic signal rise)
> > + * T5 >= 10ms, 0 < T6 <= 10ms
> > + */
> > + msleep(20);
>
> Please use kernel coding style comment, and maybe an empty
> line between gpiod...() and the comment:
>
> gpiod_set_value(ctx->reset, 0);
> /*
> * T5 + T6 (avdd rise + video & logic signal rise)
> * T5 >= 10ms, 0 < T6 <= 10ms
> */
> msleep(20);
>
>
> > +static int feiyang_get_modes(struct drm_panel *panel)
> > +{
> > + struct drm_connector *connector = panel->connector;
> > + struct feiyang *ctx = panel_to_feiyang(panel);
> > + struct drm_display_mode *mode;
> > +
> > + mode = drm_mode_duplicate(panel->drm, &feiyang_default_mode);
> > + if (!mode) {
> > + DRM_DEV_ERROR(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n",
> > + feiyang_default_mode.hdisplay,
> > + feiyang_default_mode.vdisplay,
> > + feiyang_default_mode.vrefresh);
> Please consider to use DRM_MODE_FMT and DRM_MODE_ARG for printing.

I see DRM_MODE_ARG as mode argument, that print all mode timings but
here we need only 3 timings out of it. do we really need? if yes
please suggest an example.

\
 
 \ /
  Last update: 2019-01-27 20:12    [W:0.066 / U:3.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site