lkml.org 
[lkml]   [2019]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] Add initial Bitmain BM1880 SoC/Board support
Date
Hello,

This patchset adds initial support for Bitmain BM1880 SoC and Sophon
Edge board. BM1880 SoC consists of a Dual Core ARM Cortex A53 Application
processor subsystem, a single core RISC-V subsystem and a Tensor
Processor subsystem. This patchset adds support for only ARM Cortex
A53 Application processor subsystem with UART, which enables the board to
boot into initramfs with 2 CPUs.

Thanks,
Mani

Manivannan Sadhasivam (5):
dt-bindings: arm: Document Bitmain BM1880 SoC
arm64: Add ARCH_BITMAIN platform
arm64: dts: bitmain: Add BM1880 SoC support
arm64: dts: bitmain: Add Sophon Egde board support
MAINTAINERS: Add entry for Bitmain SoC platform

.../devicetree/bindings/arm/bitmain.yaml | 18 +++
MAINTAINERS | 7 ++
arch/arm64/Kconfig.platforms | 5 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/bitmain/Makefile | 3 +
.../boot/dts/bitmain/bm1880-sophon-edge.dts | 50 ++++++++
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 119 ++++++++++++++++++
7 files changed, 203 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/bitmain.yaml
create mode 100644 arch/arm64/boot/dts/bitmain/Makefile
create mode 100644 arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
create mode 100644 arch/arm64/boot/dts/bitmain/bm1880.dtsi

--
2.17.1

\
 
 \ /
  Last update: 2019-01-26 05:12    [W:0.119 / U:0.900 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site