lkml.org 
[lkml]   [2019]   [Jan]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] EDAC, skx_edac: Delete the duplicated codes
Date
From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>

Part of the skx_edac driver codes are carved to the skx_comm_edac.c
file, which are used by both skx_edac driver and i10nm_edac driver.
Delete the duplicated codes from the skx_edac.c file and rename
skx_edac.c to skx_base.c. Update the Makefile to build the skx_edac
driver from skx_base.c plux skx_comm_edac.c

Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
drivers/edac/Makefile | 4 +-
drivers/edac/skx_base.c | 673 +++++++++++++++++++
drivers/edac/skx_edac.c | 1358 ---------------------------------------
3 files changed, 676 insertions(+), 1359 deletions(-)
create mode 100644 drivers/edac/skx_base.c
delete mode 100644 drivers/edac/skx_edac.c

diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 716096d08ea0..1764b7ed05db 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -30,7 +30,6 @@ obj-$(CONFIG_EDAC_I5400) += i5400_edac.o
obj-$(CONFIG_EDAC_I7300) += i7300_edac.o
obj-$(CONFIG_EDAC_I7CORE) += i7core_edac.o
obj-$(CONFIG_EDAC_SBRIDGE) += sb_edac.o
-obj-$(CONFIG_EDAC_SKX) += skx_edac.o
obj-$(CONFIG_EDAC_PND2) += pnd2_edac.o
obj-$(CONFIG_EDAC_E7XXX) += e7xxx_edac.o
obj-$(CONFIG_EDAC_E752X) += e752x_edac.o
@@ -58,6 +57,9 @@ obj-$(CONFIG_EDAC_MPC85XX) += mpc85xx_edac_mod.o
layerscape_edac_mod-y := fsl_ddr_edac.o layerscape_edac.o
obj-$(CONFIG_EDAC_LAYERSCAPE) += layerscape_edac_mod.o

+skx_edac-y := skx_comm_edac.o skx_base.o
+obj-$(CONFIG_EDAC_SKX) += skx_edac.o
+
obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o
obj-$(CONFIG_EDAC_CELL) += cell_edac.o
obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o
diff --git a/drivers/edac/skx_base.c b/drivers/edac/skx_base.c
new file mode 100644
index 000000000000..4aa53c15b89b
--- /dev/null
+++ b/drivers/edac/skx_base.c
@@ -0,0 +1,673 @@
+/*
+ * EDAC driver for Intel(R) Xeon(R) Skylake processors
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+#include <linux/smp.h>
+#include <linux/bitmap.h>
+#include <linux/math64.h>
+#include <linux/mod_devicetable.h>
+#include <linux/adxl.h>
+#include <acpi/nfit.h>
+#include <asm/cpu_device_id.h>
+#include <asm/intel-family.h>
+#include <asm/processor.h>
+#include <asm/mce.h>
+
+#include "edac_module.h"
+#include "skx_comm_edac.h"
+
+#define EDAC_MOD_STR "skx_edac"
+
+/*
+ * Debug macros
+ */
+#define skx_printk(level, fmt, arg...) \
+ edac_printk(level, "skx", fmt, ##arg)
+
+#define skx_mc_printk(mci, level, fmt, arg...) \
+ edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg)
+
+static struct list_head *skx_edac_list;
+
+static u64 skx_tolm, skx_tohm;
+static int skx_num_sockets;
+static unsigned int nvdimm_count;
+
+#define MASK26 0x3FFFFFF /* Mask for 2^26 */
+#define MASK29 0x1FFFFFFF /* Mask for 2^29 */
+
+static struct skx_dev *get_skx_dev(struct pci_bus *bus, u8 idx)
+{
+ struct skx_dev *d;
+
+ list_for_each_entry(d, skx_edac_list, list) {
+ if (d->seg == pci_domain_nr(bus) && d->bus[idx] == bus->number)
+ return d;
+ }
+
+ return NULL;
+}
+
+enum munittype {
+ CHAN0, CHAN1, CHAN2, SAD_ALL, UTIL_ALL, SAD
+};
+
+struct munit {
+ u16 did;
+ u16 devfn[SKX_NUM_IMC];
+ u8 busidx;
+ u8 per_socket;
+ enum munittype mtype;
+};
+
+/*
+ * List of PCI device ids that we need together with some device
+ * number and function numbers to tell which memory controller the
+ * device belongs to.
+ */
+static const struct munit skx_all_munits[] = {
+ { 0x2054, { }, 1, 1, SAD_ALL },
+ { 0x2055, { }, 1, 1, UTIL_ALL },
+ { 0x2040, { PCI_DEVFN(10, 0), PCI_DEVFN(12, 0) }, 2, 2, CHAN0 },
+ { 0x2044, { PCI_DEVFN(10, 4), PCI_DEVFN(12, 4) }, 2, 2, CHAN1 },
+ { 0x2048, { PCI_DEVFN(11, 0), PCI_DEVFN(13, 0) }, 2, 2, CHAN2 },
+ { 0x208e, { }, 1, 0, SAD },
+ { }
+};
+
+static int get_all_munits(const struct munit *m)
+{
+ struct pci_dev *pdev, *prev;
+ struct skx_dev *d;
+ u32 reg;
+ int i = 0, ndev = 0;
+
+ prev = NULL;
+ for (;;) {
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, m->did, prev);
+ if (!pdev)
+ break;
+ ndev++;
+ if (m->per_socket == SKX_NUM_IMC) {
+ for (i = 0; i < SKX_NUM_IMC; i++)
+ if (m->devfn[i] == pdev->devfn)
+ break;
+ if (i == SKX_NUM_IMC)
+ goto fail;
+ }
+ d = get_skx_dev(pdev->bus, m->busidx);
+ if (!d)
+ goto fail;
+
+ /* Be sure that the device is enabled */
+ if (unlikely(pci_enable_device(pdev) < 0)) {
+ skx_printk(KERN_ERR, "Couldn't enable device %04x:%04x\n",
+ PCI_VENDOR_ID_INTEL, m->did);
+ goto fail;
+ }
+
+ switch (m->mtype) {
+ case CHAN0: case CHAN1: case CHAN2:
+ pci_dev_get(pdev);
+ d->imc[i].chan[m->mtype].cdev = pdev;
+ break;
+ case SAD_ALL:
+ pci_dev_get(pdev);
+ d->sad_all = pdev;
+ break;
+ case UTIL_ALL:
+ pci_dev_get(pdev);
+ d->util_all = pdev;
+ break;
+ case SAD:
+ /*
+ * one of these devices per core, including cores
+ * that don't exist on this SKU. Ignore any that
+ * read a route table of zero, make sure all the
+ * non-zero values match.
+ */
+ pci_read_config_dword(pdev, 0xB4, &reg);
+ if (reg != 0) {
+ if (d->mcroute == 0) {
+ d->mcroute = reg;
+ } else if (d->mcroute != reg) {
+ skx_printk(KERN_ERR, "mcroute mismatch\n");
+ goto fail;
+ }
+ }
+ ndev--;
+ break;
+ }
+
+ prev = pdev;
+ }
+
+ return ndev;
+fail:
+ pci_dev_put(pdev);
+ return -ENODEV;
+}
+
+static const struct x86_cpu_id skx_cpuids[] = {
+ { X86_VENDOR_INTEL, 6, INTEL_FAM6_SKYLAKE_X, 0, 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(x86cpu, skx_cpuids);
+
+#define SKX_GET_MTMTR(dev, reg) \
+ pci_read_config_dword((dev), 0x87c, &(reg))
+
+static bool skx_check_ecc(struct pci_dev *pdev)
+{
+ u32 mtmtr;
+
+ SKX_GET_MTMTR(pdev, mtmtr);
+
+ return !!GET_BITFIELD(mtmtr, 2, 2);
+}
+
+static int skx_get_dimm_config(struct mem_ctl_info *mci)
+{
+ struct skx_pvt *pvt = mci->pvt_info;
+ struct skx_imc *imc = pvt->imc;
+ u32 mtr, amap, mcddrtcfg;
+ struct dimm_info *dimm;
+ int i, j;
+ int ndimms;
+
+ for (i = 0; i < SKX_NUM_CHANNELS; i++) {
+ ndimms = 0;
+ pci_read_config_dword(imc->chan[i].cdev, 0x8C, &amap);
+ pci_read_config_dword(imc->chan[i].cdev, 0x400, &mcddrtcfg);
+ for (j = 0; j < SKX_NUM_DIMMS; j++) {
+ dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+ mci->n_layers, i, j, 0);
+ pci_read_config_dword(imc->chan[i].cdev,
+ 0x80 + 4 * j, &mtr);
+ if (IS_DIMM_PRESENT(mtr)) {
+ ndimms += skx_get_dimm_info(mtr, amap, dimm, imc, i, j);
+ } else if (IS_NVDIMM_PRESENT(mcddrtcfg, j)) {
+ ndimms += skx_get_nvdimm_info(dimm, imc, i, j,
+ EDAC_MOD_STR);
+ nvdimm_count++;
+ }
+ }
+ if (ndimms && !skx_check_ecc(imc->chan[0].cdev)) {
+ skx_printk(KERN_ERR, "ECC is disabled on imc %d\n", imc->mc);
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+
+#define SKX_MAX_SAD 24
+
+#define SKX_GET_SAD(d, i, reg) \
+ pci_read_config_dword((d)->sad_all, 0x60 + 8 * (i), &(reg))
+#define SKX_GET_ILV(d, i, reg) \
+ pci_read_config_dword((d)->sad_all, 0x64 + 8 * (i), &(reg))
+
+#define SKX_SAD_MOD3MODE(sad) GET_BITFIELD((sad), 30, 31)
+#define SKX_SAD_MOD3(sad) GET_BITFIELD((sad), 27, 27)
+#define SKX_SAD_LIMIT(sad) (((u64)GET_BITFIELD((sad), 7, 26) << 26) | MASK26)
+#define SKX_SAD_MOD3ASMOD2(sad) GET_BITFIELD((sad), 5, 6)
+#define SKX_SAD_ATTR(sad) GET_BITFIELD((sad), 3, 4)
+#define SKX_SAD_INTERLEAVE(sad) GET_BITFIELD((sad), 1, 2)
+#define SKX_SAD_ENABLE(sad) GET_BITFIELD((sad), 0, 0)
+
+#define SKX_ILV_REMOTE(tgt) (((tgt) & 8) == 0)
+#define SKX_ILV_TARGET(tgt) ((tgt) & 7)
+
+static bool skx_sad_decode(struct decoded_addr *res)
+{
+ struct skx_dev *d = list_first_entry(skx_edac_list, typeof(*d), list);
+ u64 addr = res->addr;
+ int i, idx, tgt, lchan, shift;
+ u32 sad, ilv;
+ u64 limit, prev_limit;
+ int remote = 0;
+
+ /* Simple sanity check for I/O space or out of range */
+ if (addr >= skx_tohm || (addr >= skx_tolm && addr < BIT_ULL(32))) {
+ edac_dbg(0, "Address 0x%llx out of range\n", addr);
+ return false;
+ }
+
+restart:
+ prev_limit = 0;
+ for (i = 0; i < SKX_MAX_SAD; i++) {
+ SKX_GET_SAD(d, i, sad);
+ limit = SKX_SAD_LIMIT(sad);
+ if (SKX_SAD_ENABLE(sad)) {
+ if (addr >= prev_limit && addr <= limit)
+ goto sad_found;
+ }
+ prev_limit = limit + 1;
+ }
+ edac_dbg(0, "No SAD entry for 0x%llx\n", addr);
+ return false;
+
+sad_found:
+ SKX_GET_ILV(d, i, ilv);
+
+ switch (SKX_SAD_INTERLEAVE(sad)) {
+ case 0:
+ idx = GET_BITFIELD(addr, 6, 8);
+ break;
+ case 1:
+ idx = GET_BITFIELD(addr, 8, 10);
+ break;
+ case 2:
+ idx = GET_BITFIELD(addr, 12, 14);
+ break;
+ case 3:
+ idx = GET_BITFIELD(addr, 30, 32);
+ break;
+ }
+
+ tgt = GET_BITFIELD(ilv, 4 * idx, 4 * idx + 3);
+
+ /* If point to another node, find it and start over */
+ if (SKX_ILV_REMOTE(tgt)) {
+ if (remote) {
+ edac_dbg(0, "Double remote!\n");
+ return false;
+ }
+ remote = 1;
+ list_for_each_entry(d, skx_edac_list, list) {
+ if (d->imc[0].src_id == SKX_ILV_TARGET(tgt))
+ goto restart;
+ }
+ edac_dbg(0, "Can't find node %d\n", SKX_ILV_TARGET(tgt));
+ return false;
+ }
+
+ if (SKX_SAD_MOD3(sad) == 0) {
+ lchan = SKX_ILV_TARGET(tgt);
+ } else {
+ switch (SKX_SAD_MOD3MODE(sad)) {
+ case 0:
+ shift = 6;
+ break;
+ case 1:
+ shift = 8;
+ break;
+ case 2:
+ shift = 12;
+ break;
+ default:
+ edac_dbg(0, "illegal mod3mode\n");
+ return false;
+ }
+ switch (SKX_SAD_MOD3ASMOD2(sad)) {
+ case 0:
+ lchan = (addr >> shift) % 3;
+ break;
+ case 1:
+ lchan = (addr >> shift) % 2;
+ break;
+ case 2:
+ lchan = (addr >> shift) % 2;
+ lchan = (lchan << 1) | !lchan;
+ break;
+ case 3:
+ lchan = ((addr >> shift) % 2) << 1;
+ break;
+ }
+ lchan = (lchan << 1) | (SKX_ILV_TARGET(tgt) & 1);
+ }
+
+ res->dev = d;
+ res->socket = d->imc[0].src_id;
+ res->imc = GET_BITFIELD(d->mcroute, lchan * 3, lchan * 3 + 2);
+ res->channel = GET_BITFIELD(d->mcroute, lchan * 2 + 18, lchan * 2 + 19);
+
+ edac_dbg(2, "0x%llx: socket=%d imc=%d channel=%d\n",
+ res->addr, res->socket, res->imc, res->channel);
+ return true;
+}
+
+#define SKX_MAX_TAD 8
+
+#define SKX_GET_TADBASE(d, mc, i, reg) \
+ pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x850 + 4 * (i), &(reg))
+#define SKX_GET_TADWAYNESS(d, mc, i, reg) \
+ pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x880 + 4 * (i), &(reg))
+#define SKX_GET_TADCHNILVOFFSET(d, mc, ch, i, reg) \
+ pci_read_config_dword((d)->imc[mc].chan[ch].cdev, 0x90 + 4 * (i), &(reg))
+
+#define SKX_TAD_BASE(b) ((u64)GET_BITFIELD((b), 12, 31) << 26)
+#define SKX_TAD_SKT_GRAN(b) GET_BITFIELD((b), 4, 5)
+#define SKX_TAD_CHN_GRAN(b) GET_BITFIELD((b), 6, 7)
+#define SKX_TAD_LIMIT(b) (((u64)GET_BITFIELD((b), 12, 31) << 26) | MASK26)
+#define SKX_TAD_OFFSET(b) ((u64)GET_BITFIELD((b), 4, 23) << 26)
+#define SKX_TAD_SKTWAYS(b) (1 << GET_BITFIELD((b), 10, 11))
+#define SKX_TAD_CHNWAYS(b) (GET_BITFIELD((b), 8, 9) + 1)
+
+/* which bit used for both socket and channel interleave */
+static int skx_granularity[] = { 6, 8, 12, 30 };
+
+static u64 skx_do_interleave(u64 addr, int shift, int ways, u64 lowbits)
+{
+ addr >>= shift;
+ addr /= ways;
+ addr <<= shift;
+
+ return addr | (lowbits & ((1ull << shift) - 1));
+}
+
+static bool skx_tad_decode(struct decoded_addr *res)
+{
+ int i;
+ u32 base, wayness, chnilvoffset;
+ int skt_interleave_bit, chn_interleave_bit;
+ u64 channel_addr;
+
+ for (i = 0; i < SKX_MAX_TAD; i++) {
+ SKX_GET_TADBASE(res->dev, res->imc, i, base);
+ SKX_GET_TADWAYNESS(res->dev, res->imc, i, wayness);
+ if (SKX_TAD_BASE(base) <= res->addr && res->addr <= SKX_TAD_LIMIT(wayness))
+ goto tad_found;
+ }
+ edac_dbg(0, "No TAD entry for 0x%llx\n", res->addr);
+ return false;
+
+tad_found:
+ res->sktways = SKX_TAD_SKTWAYS(wayness);
+ res->chanways = SKX_TAD_CHNWAYS(wayness);
+ skt_interleave_bit = skx_granularity[SKX_TAD_SKT_GRAN(base)];
+ chn_interleave_bit = skx_granularity[SKX_TAD_CHN_GRAN(base)];
+
+ SKX_GET_TADCHNILVOFFSET(res->dev, res->imc, res->channel, i, chnilvoffset);
+ channel_addr = res->addr - SKX_TAD_OFFSET(chnilvoffset);
+
+ if (res->chanways == 3 && skt_interleave_bit > chn_interleave_bit) {
+ /* Must handle channel first, then socket */
+ channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit,
+ res->chanways, channel_addr);
+ channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit,
+ res->sktways, channel_addr);
+ } else {
+ /* Handle socket then channel. Preserve low bits from original address */
+ channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit,
+ res->sktways, res->addr);
+ channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit,
+ res->chanways, res->addr);
+ }
+
+ res->chan_addr = channel_addr;
+
+ edac_dbg(2, "0x%llx: chan_addr=0x%llx sktways=%d chanways=%d\n",
+ res->addr, res->chan_addr, res->sktways, res->chanways);
+ return true;
+}
+
+#define SKX_MAX_RIR 4
+
+#define SKX_GET_RIRWAYNESS(d, mc, ch, i, reg) \
+ pci_read_config_dword((d)->imc[mc].chan[ch].cdev, \
+ 0x108 + 4 * (i), &(reg))
+#define SKX_GET_RIRILV(d, mc, ch, idx, i, reg) \
+ pci_read_config_dword((d)->imc[mc].chan[ch].cdev, \
+ 0x120 + 16 * (idx) + 4 * (i), &(reg))
+
+#define SKX_RIR_VALID(b) GET_BITFIELD((b), 31, 31)
+#define SKX_RIR_LIMIT(b) (((u64)GET_BITFIELD((b), 1, 11) << 29) | MASK29)
+#define SKX_RIR_WAYS(b) (1 << GET_BITFIELD((b), 28, 29))
+#define SKX_RIR_CHAN_RANK(b) GET_BITFIELD((b), 16, 19)
+#define SKX_RIR_OFFSET(b) ((u64)(GET_BITFIELD((b), 2, 15) << 26))
+
+static bool skx_rir_decode(struct decoded_addr *res)
+{
+ int i, idx, chan_rank;
+ int shift;
+ u32 rirway, rirlv;
+ u64 rank_addr, prev_limit = 0, limit;
+
+ if (res->dev->imc[res->imc].chan[res->channel].dimms[0].close_pg)
+ shift = 6;
+ else
+ shift = 13;
+
+ for (i = 0; i < SKX_MAX_RIR; i++) {
+ SKX_GET_RIRWAYNESS(res->dev, res->imc, res->channel, i, rirway);
+ limit = SKX_RIR_LIMIT(rirway);
+ if (SKX_RIR_VALID(rirway)) {
+ if (prev_limit <= res->chan_addr &&
+ res->chan_addr <= limit)
+ goto rir_found;
+ }
+ prev_limit = limit;
+ }
+ edac_dbg(0, "No RIR entry for 0x%llx\n", res->addr);
+ return false;
+
+rir_found:
+ rank_addr = res->chan_addr >> shift;
+ rank_addr /= SKX_RIR_WAYS(rirway);
+ rank_addr <<= shift;
+ rank_addr |= res->chan_addr & GENMASK_ULL(shift - 1, 0);
+
+ res->rank_address = rank_addr;
+ idx = (res->chan_addr >> shift) % SKX_RIR_WAYS(rirway);
+
+ SKX_GET_RIRILV(res->dev, res->imc, res->channel, idx, i, rirlv);
+ res->rank_address = rank_addr - SKX_RIR_OFFSET(rirlv);
+ chan_rank = SKX_RIR_CHAN_RANK(rirlv);
+ res->channel_rank = chan_rank;
+ res->dimm = chan_rank / 4;
+ res->rank = chan_rank % 4;
+
+ edac_dbg(2, "0x%llx: dimm=%d rank=%d chan_rank=%d rank_addr=0x%llx\n",
+ res->addr, res->dimm, res->rank,
+ res->channel_rank, res->rank_address);
+ return true;
+}
+
+static u8 skx_close_row[] = {
+ 15, 16, 17, 18, 20, 21, 22, 28, 10, 11, 12, 13, 29, 30, 31, 32, 33
+};
+
+static u8 skx_close_column[] = {
+ 3, 4, 5, 14, 19, 23, 24, 25, 26, 27
+};
+
+static u8 skx_open_row[] = {
+ 14, 15, 16, 20, 28, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33
+};
+
+static u8 skx_open_column[] = {
+ 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
+};
+
+static u8 skx_open_fine_column[] = {
+ 3, 4, 5, 7, 8, 9, 10, 11, 12, 13
+};
+
+static int skx_bits(u64 addr, int nbits, u8 *bits)
+{
+ int i, res = 0;
+
+ for (i = 0; i < nbits; i++)
+ res |= ((addr >> bits[i]) & 1) << i;
+ return res;
+}
+
+static int skx_bank_bits(u64 addr, int b0, int b1, int do_xor, int x0, int x1)
+{
+ int ret = GET_BITFIELD(addr, b0, b0) | (GET_BITFIELD(addr, b1, b1) << 1);
+
+ if (do_xor)
+ ret ^= GET_BITFIELD(addr, x0, x0) | (GET_BITFIELD(addr, x1, x1) << 1);
+
+ return ret;
+}
+
+static bool skx_mad_decode(struct decoded_addr *r)
+{
+ struct skx_dimm *dimm = &r->dev->imc[r->imc].chan[r->channel].dimms[r->dimm];
+ int bg0 = dimm->fine_grain_bank ? 6 : 13;
+
+ if (dimm->close_pg) {
+ r->row = skx_bits(r->rank_address, dimm->rowbits, skx_close_row);
+ r->column = skx_bits(r->rank_address, dimm->colbits, skx_close_column);
+ r->column |= 0x400; /* C10 is autoprecharge, always set */
+ r->bank_address = skx_bank_bits(r->rank_address, 8, 9, dimm->bank_xor_enable, 22, 28);
+ r->bank_group = skx_bank_bits(r->rank_address, 6, 7, dimm->bank_xor_enable, 20, 21);
+ } else {
+ r->row = skx_bits(r->rank_address, dimm->rowbits, skx_open_row);
+ if (dimm->fine_grain_bank)
+ r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_fine_column);
+ else
+ r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_column);
+ r->bank_address = skx_bank_bits(r->rank_address, 18, 19, dimm->bank_xor_enable, 22, 23);
+ r->bank_group = skx_bank_bits(r->rank_address, bg0, 17, dimm->bank_xor_enable, 20, 21);
+ }
+ r->row &= (1u << dimm->rowbits) - 1;
+
+ edac_dbg(2, "0x%llx: row=0x%x col=0x%x bank_addr=%d bank_group=%d\n",
+ r->addr, r->row, r->column, r->bank_address,
+ r->bank_group);
+ return true;
+}
+
+static bool skx_decode(struct decoded_addr *res)
+{
+ return skx_sad_decode(res) && skx_tad_decode(res) &&
+ skx_rir_decode(res) && skx_mad_decode(res);
+}
+
+static struct notifier_block skx_mce_dec = {
+ .notifier_call = skx_mce_check_error,
+ .priority = MCE_PRIO_EDAC,
+};
+
+/*
+ * skx_init:
+ * make sure we are running on the correct cpu model
+ * search for all the devices we need
+ * check which DIMMs are present.
+ */
+static int __init skx_init(void)
+{
+ const struct x86_cpu_id *id;
+ const struct munit *m;
+ const char *owner;
+ int rc = 0, i, off[3] = {0xd0, 0xd4, 0xd8};
+ u8 mc = 0, src_id, node_id;
+ struct skx_dev *d;
+
+ edac_dbg(2, "\n");
+
+ owner = edac_get_owner();
+ if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
+ return -EBUSY;
+
+ id = x86_match_cpu(skx_cpuids);
+ if (!id)
+ return -ENODEV;
+
+ rc = skx_get_hi_lo(0x2034, off, &skx_tolm, &skx_tohm);
+ if (rc)
+ return rc;
+
+ rc = skx_get_all_bus_mappings(0x2016, 0xcc, SKX, &skx_edac_list);
+ if (rc < 0)
+ goto fail;
+ if (rc == 0) {
+ edac_dbg(2, "No memory controllers found\n");
+ return -ENODEV;
+ }
+ skx_num_sockets = rc;
+
+ for (m = skx_all_munits; m->did; m++) {
+ rc = get_all_munits(m);
+ if (rc < 0)
+ goto fail;
+ if (rc != m->per_socket * skx_num_sockets) {
+ edac_dbg(2, "Expected %d, got %d of 0x%x\n",
+ m->per_socket * skx_num_sockets, rc, m->did);
+ rc = -ENODEV;
+ goto fail;
+ }
+ }
+
+ list_for_each_entry(d, skx_edac_list, list) {
+ rc = skx_get_src_id(d, &src_id);
+ if (rc < 0)
+ goto fail;
+ rc = skx_get_node_id(d, &node_id);
+ if (rc < 0)
+ goto fail;
+ edac_dbg(2, "src_id=%d node_id=%d\n", src_id, node_id);
+ for (i = 0; i < SKX_NUM_IMC; i++) {
+ d->imc[i].mc = mc++;
+ d->imc[i].lmc = i;
+ d->imc[i].src_id = src_id;
+ d->imc[i].node_id = node_id;
+ rc = skx_register_mci(&d->imc[i], d->imc[i].chan[0].cdev,
+ "Skylake Socket", EDAC_MOD_STR,
+ skx_get_dimm_config);
+ if (rc < 0)
+ goto fail;
+ }
+ }
+
+ skx_set_decode(skx_decode);
+
+ if (nvdimm_count && skx_adxl_get() == -ENODEV)
+ skx_printk(KERN_NOTICE, "Only decoding DDR4 address!\n");
+
+ /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+ opstate_init();
+
+ setup_skx_debug("skx_test");
+
+ mce_register_decode_chain(&skx_mce_dec);
+
+ return 0;
+fail:
+ skx_remove();
+ return rc;
+}
+
+static void __exit skx_exit(void)
+{
+ edac_dbg(2, "\n");
+ mce_unregister_decode_chain(&skx_mce_dec);
+ teardown_skx_debug();
+ if (nvdimm_count)
+ skx_adxl_put();
+ skx_remove();
+}
+
+module_init(skx_init);
+module_exit(skx_exit);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Tony Luck");
+MODULE_DESCRIPTION("MC Driver for Intel Skylake server processors");
diff --git a/drivers/edac/skx_edac.c b/drivers/edac/skx_edac.c
deleted file mode 100644
index 93ef161bb5e1..000000000000
--- a/drivers/edac/skx_edac.c
+++ /dev/null
@@ -1,1358 +0,0 @@
-/*
- * EDAC driver for Intel(R) Xeon(R) Skylake processors
- * Copyright (c) 2016, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <linux/dmi.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/edac.h>
-#include <linux/mmzone.h>
-#include <linux/smp.h>
-#include <linux/bitmap.h>
-#include <linux/math64.h>
-#include <linux/mod_devicetable.h>
-#include <linux/adxl.h>
-#include <acpi/nfit.h>
-#include <asm/cpu_device_id.h>
-#include <asm/intel-family.h>
-#include <asm/processor.h>
-#include <asm/mce.h>
-
-#include "edac_module.h"
-
-#define EDAC_MOD_STR "skx_edac"
-#define MSG_SIZE 1024
-
-/*
- * Debug macros
- */
-#define skx_printk(level, fmt, arg...) \
- edac_printk(level, "skx", fmt, ##arg)
-
-#define skx_mc_printk(mci, level, fmt, arg...) \
- edac_mc_chipset_printk(mci, level, "skx", fmt, ##arg)
-
-/*
- * Get a bit field at register value <v>, from bit <lo> to bit <hi>
- */
-#define GET_BITFIELD(v, lo, hi) \
- (((v) & GENMASK_ULL((hi), (lo))) >> (lo))
-
-static LIST_HEAD(skx_edac_list);
-
-static u64 skx_tolm, skx_tohm;
-static char *skx_msg;
-static unsigned int nvdimm_count;
-
-enum {
- INDEX_SOCKET,
- INDEX_MEMCTRL,
- INDEX_CHANNEL,
- INDEX_DIMM,
- INDEX_MAX
-};
-
-static const char * const component_names[] = {
- [INDEX_SOCKET] = "ProcessorSocketId",
- [INDEX_MEMCTRL] = "MemoryControllerId",
- [INDEX_CHANNEL] = "ChannelId",
- [INDEX_DIMM] = "DimmSlotId",
-};
-
-static int component_indices[ARRAY_SIZE(component_names)];
-static int adxl_component_count;
-static const char * const *adxl_component_names;
-static u64 *adxl_values;
-static char *adxl_msg;
-
-#define NUM_IMC 2 /* memory controllers per socket */
-#define NUM_CHANNELS 3 /* channels per memory controller */
-#define NUM_DIMMS 2 /* Max DIMMS per channel */
-
-#define MASK26 0x3FFFFFF /* Mask for 2^26 */
-#define MASK29 0x1FFFFFFF /* Mask for 2^29 */
-
-/*
- * Each cpu socket contains some pci devices that provide global
- * information, and also some that are local to each of the two
- * memory controllers on the die.
- */
-struct skx_dev {
- struct list_head list;
- u8 bus[4];
- int seg;
- struct pci_dev *sad_all;
- struct pci_dev *util_all;
- u32 mcroute;
- struct skx_imc {
- struct mem_ctl_info *mci;
- u8 mc; /* system wide mc# */
- u8 lmc; /* socket relative mc# */
- u8 src_id, node_id;
- struct skx_channel {
- struct pci_dev *cdev;
- struct skx_dimm {
- u8 close_pg;
- u8 bank_xor_enable;
- u8 fine_grain_bank;
- u8 rowbits;
- u8 colbits;
- } dimms[NUM_DIMMS];
- } chan[NUM_CHANNELS];
- } imc[NUM_IMC];
-};
-static int skx_num_sockets;
-
-struct skx_pvt {
- struct skx_imc *imc;
-};
-
-struct decoded_addr {
- struct skx_dev *dev;
- u64 addr;
- int socket;
- int imc;
- int channel;
- u64 chan_addr;
- int sktways;
- int chanways;
- int dimm;
- int rank;
- int channel_rank;
- u64 rank_address;
- int row;
- int column;
- int bank_address;
- int bank_group;
-};
-
-static struct skx_dev *get_skx_dev(struct pci_bus *bus, u8 idx)
-{
- struct skx_dev *d;
-
- list_for_each_entry(d, &skx_edac_list, list) {
- if (d->seg == pci_domain_nr(bus) && d->bus[idx] == bus->number)
- return d;
- }
-
- return NULL;
-}
-
-enum munittype {
- CHAN0, CHAN1, CHAN2, SAD_ALL, UTIL_ALL, SAD
-};
-
-struct munit {
- u16 did;
- u16 devfn[NUM_IMC];
- u8 busidx;
- u8 per_socket;
- enum munittype mtype;
-};
-
-/*
- * List of PCI device ids that we need together with some device
- * number and function numbers to tell which memory controller the
- * device belongs to.
- */
-static const struct munit skx_all_munits[] = {
- { 0x2054, { }, 1, 1, SAD_ALL },
- { 0x2055, { }, 1, 1, UTIL_ALL },
- { 0x2040, { PCI_DEVFN(10, 0), PCI_DEVFN(12, 0) }, 2, 2, CHAN0 },
- { 0x2044, { PCI_DEVFN(10, 4), PCI_DEVFN(12, 4) }, 2, 2, CHAN1 },
- { 0x2048, { PCI_DEVFN(11, 0), PCI_DEVFN(13, 0) }, 2, 2, CHAN2 },
- { 0x208e, { }, 1, 0, SAD },
- { }
-};
-
-/*
- * We use the per-socket device 0x2016 to count how many sockets are present,
- * and to detemine which PCI buses are associated with each socket. Allocate
- * and build the full list of all the skx_dev structures that we need here.
- */
-static int get_all_bus_mappings(void)
-{
- struct pci_dev *pdev, *prev;
- struct skx_dev *d;
- u32 reg;
- int ndev = 0;
-
- prev = NULL;
- for (;;) {
- pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2016, prev);
- if (!pdev)
- break;
- ndev++;
- d = kzalloc(sizeof(*d), GFP_KERNEL);
- if (!d) {
- pci_dev_put(pdev);
- return -ENOMEM;
- }
- d->seg = pci_domain_nr(pdev->bus);
- pci_read_config_dword(pdev, 0xCC, &reg);
- d->bus[0] = GET_BITFIELD(reg, 0, 7);
- d->bus[1] = GET_BITFIELD(reg, 8, 15);
- d->bus[2] = GET_BITFIELD(reg, 16, 23);
- d->bus[3] = GET_BITFIELD(reg, 24, 31);
- edac_dbg(2, "busses: 0x%x, 0x%x, 0x%x, 0x%x\n",
- d->bus[0], d->bus[1], d->bus[2], d->bus[3]);
- list_add_tail(&d->list, &skx_edac_list);
- skx_num_sockets++;
- prev = pdev;
- }
-
- return ndev;
-}
-
-static int get_all_munits(const struct munit *m)
-{
- struct pci_dev *pdev, *prev;
- struct skx_dev *d;
- u32 reg;
- int i = 0, ndev = 0;
-
- prev = NULL;
- for (;;) {
- pdev = pci_get_device(PCI_VENDOR_ID_INTEL, m->did, prev);
- if (!pdev)
- break;
- ndev++;
- if (m->per_socket == NUM_IMC) {
- for (i = 0; i < NUM_IMC; i++)
- if (m->devfn[i] == pdev->devfn)
- break;
- if (i == NUM_IMC)
- goto fail;
- }
- d = get_skx_dev(pdev->bus, m->busidx);
- if (!d)
- goto fail;
-
- /* Be sure that the device is enabled */
- if (unlikely(pci_enable_device(pdev) < 0)) {
- skx_printk(KERN_ERR, "Couldn't enable device %04x:%04x\n",
- PCI_VENDOR_ID_INTEL, m->did);
- goto fail;
- }
-
- switch (m->mtype) {
- case CHAN0: case CHAN1: case CHAN2:
- pci_dev_get(pdev);
- d->imc[i].chan[m->mtype].cdev = pdev;
- break;
- case SAD_ALL:
- pci_dev_get(pdev);
- d->sad_all = pdev;
- break;
- case UTIL_ALL:
- pci_dev_get(pdev);
- d->util_all = pdev;
- break;
- case SAD:
- /*
- * one of these devices per core, including cores
- * that don't exist on this SKU. Ignore any that
- * read a route table of zero, make sure all the
- * non-zero values match.
- */
- pci_read_config_dword(pdev, 0xB4, &reg);
- if (reg != 0) {
- if (d->mcroute == 0)
- d->mcroute = reg;
- else if (d->mcroute != reg) {
- skx_printk(KERN_ERR,
- "mcroute mismatch\n");
- goto fail;
- }
- }
- ndev--;
- break;
- }
-
- prev = pdev;
- }
-
- return ndev;
-fail:
- pci_dev_put(pdev);
- return -ENODEV;
-}
-
-static const struct x86_cpu_id skx_cpuids[] = {
- { X86_VENDOR_INTEL, 6, INTEL_FAM6_SKYLAKE_X, 0, 0 },
- { }
-};
-MODULE_DEVICE_TABLE(x86cpu, skx_cpuids);
-
-static u8 get_src_id(struct skx_dev *d)
-{
- u32 reg;
-
- pci_read_config_dword(d->util_all, 0xF0, &reg);
-
- return GET_BITFIELD(reg, 12, 14);
-}
-
-static u8 skx_get_node_id(struct skx_dev *d)
-{
- u32 reg;
-
- pci_read_config_dword(d->util_all, 0xF4, &reg);
-
- return GET_BITFIELD(reg, 0, 2);
-}
-
-static int get_dimm_attr(u32 reg, int lobit, int hibit, int add, int minval,
- int maxval, char *name)
-{
- u32 val = GET_BITFIELD(reg, lobit, hibit);
-
- if (val < minval || val > maxval) {
- edac_dbg(2, "bad %s = %d (raw=0x%x)\n", name, val, reg);
- return -EINVAL;
- }
- return val + add;
-}
-
-#define IS_DIMM_PRESENT(mtr) GET_BITFIELD((mtr), 15, 15)
-#define IS_NVDIMM_PRESENT(mcddrtcfg, i) GET_BITFIELD((mcddrtcfg), (i), (i))
-
-#define numrank(reg) get_dimm_attr((reg), 12, 13, 0, 0, 2, "ranks")
-#define numrow(reg) get_dimm_attr((reg), 2, 4, 12, 1, 6, "rows")
-#define numcol(reg) get_dimm_attr((reg), 0, 1, 10, 0, 2, "cols")
-
-static int get_width(u32 mtr)
-{
- switch (GET_BITFIELD(mtr, 8, 9)) {
- case 0:
- return DEV_X4;
- case 1:
- return DEV_X8;
- case 2:
- return DEV_X16;
- }
- return DEV_UNKNOWN;
-}
-
-static int skx_get_hi_lo(void)
-{
- struct pci_dev *pdev;
- u32 reg;
-
- pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x2034, NULL);
- if (!pdev) {
- edac_dbg(0, "Can't get tolm/tohm\n");
- return -ENODEV;
- }
-
- pci_read_config_dword(pdev, 0xD0, &reg);
- skx_tolm = reg;
- pci_read_config_dword(pdev, 0xD4, &reg);
- skx_tohm = reg;
- pci_read_config_dword(pdev, 0xD8, &reg);
- skx_tohm |= (u64)reg << 32;
-
- pci_dev_put(pdev);
- edac_dbg(2, "tolm=0x%llx tohm=0x%llx\n", skx_tolm, skx_tohm);
-
- return 0;
-}
-
-static int get_dimm_info(u32 mtr, u32 amap, struct dimm_info *dimm,
- struct skx_imc *imc, int chan, int dimmno)
-{
- int banks = 16, ranks, rows, cols, npages;
- u64 size;
-
- ranks = numrank(mtr);
- rows = numrow(mtr);
- cols = numcol(mtr);
-
- /*
- * Compute size in 8-byte (2^3) words, then shift to MiB (2^20)
- */
- size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3);
- npages = MiB_TO_PAGES(size);
-
- edac_dbg(0, "mc#%d: channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: 0x%#x, col: 0x%#x\n",
- imc->mc, chan, dimmno, size, npages,
- banks, 1 << ranks, rows, cols);
-
- imc->chan[chan].dimms[dimmno].close_pg = GET_BITFIELD(mtr, 0, 0);
- imc->chan[chan].dimms[dimmno].bank_xor_enable = GET_BITFIELD(mtr, 9, 9);
- imc->chan[chan].dimms[dimmno].fine_grain_bank = GET_BITFIELD(amap, 0, 0);
- imc->chan[chan].dimms[dimmno].rowbits = rows;
- imc->chan[chan].dimms[dimmno].colbits = cols;
-
- dimm->nr_pages = npages;
- dimm->grain = 32;
- dimm->dtype = get_width(mtr);
- dimm->mtype = MEM_DDR4;
- dimm->edac_mode = EDAC_SECDED; /* likely better than this */
- snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u",
- imc->src_id, imc->lmc, chan, dimmno);
-
- return 1;
-}
-
-static int get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc,
- int chan, int dimmno)
-{
- int smbios_handle;
- u32 dev_handle;
- u16 flags;
- u64 size = 0;
-
- nvdimm_count++;
-
- dev_handle = ACPI_NFIT_BUILD_DEVICE_HANDLE(dimmno, chan, imc->lmc,
- imc->src_id, 0);
-
- smbios_handle = nfit_get_smbios_id(dev_handle, &flags);
- if (smbios_handle == -EOPNOTSUPP) {
- pr_warn_once(EDAC_MOD_STR ": Can't find size of NVDIMM. Try enabling CONFIG_ACPI_NFIT\n");
- goto unknown_size;
- }
-
- if (smbios_handle < 0) {
- skx_printk(KERN_ERR, "Can't find handle for NVDIMM ADR=0x%x\n", dev_handle);
- goto unknown_size;
- }
-
- if (flags & ACPI_NFIT_MEM_MAP_FAILED) {
- skx_printk(KERN_ERR, "NVDIMM ADR=0x%x is not mapped\n", dev_handle);
- goto unknown_size;
- }
-
- size = dmi_memdev_size(smbios_handle);
- if (size == ~0ull)
- skx_printk(KERN_ERR, "Can't find size for NVDIMM ADR=0x%x/SMBIOS=0x%x\n",
- dev_handle, smbios_handle);
-
-unknown_size:
- dimm->nr_pages = size >> PAGE_SHIFT;
- dimm->grain = 32;
- dimm->dtype = DEV_UNKNOWN;
- dimm->mtype = MEM_NVDIMM;
- dimm->edac_mode = EDAC_SECDED; /* likely better than this */
-
- edac_dbg(0, "mc#%d: channel %d, dimm %d, %llu MiB (%u pages)\n",
- imc->mc, chan, dimmno, size >> 20, dimm->nr_pages);
-
- snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u",
- imc->src_id, imc->lmc, chan, dimmno);
-
- return (size == 0 || size == ~0ull) ? 0 : 1;
-}
-
-#define SKX_GET_MTMTR(dev, reg) \
- pci_read_config_dword((dev), 0x87c, &reg)
-
-static bool skx_check_ecc(struct pci_dev *pdev)
-{
- u32 mtmtr;
-
- SKX_GET_MTMTR(pdev, mtmtr);
-
- return !!GET_BITFIELD(mtmtr, 2, 2);
-}
-
-static int skx_get_dimm_config(struct mem_ctl_info *mci)
-{
- struct skx_pvt *pvt = mci->pvt_info;
- struct skx_imc *imc = pvt->imc;
- u32 mtr, amap, mcddrtcfg;
- struct dimm_info *dimm;
- int i, j;
- int ndimms;
-
- for (i = 0; i < NUM_CHANNELS; i++) {
- ndimms = 0;
- pci_read_config_dword(imc->chan[i].cdev, 0x8C, &amap);
- pci_read_config_dword(imc->chan[i].cdev, 0x400, &mcddrtcfg);
- for (j = 0; j < NUM_DIMMS; j++) {
- dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
- mci->n_layers, i, j, 0);
- pci_read_config_dword(imc->chan[i].cdev,
- 0x80 + 4*j, &mtr);
- if (IS_DIMM_PRESENT(mtr))
- ndimms += get_dimm_info(mtr, amap, dimm, imc, i, j);
- else if (IS_NVDIMM_PRESENT(mcddrtcfg, j))
- ndimms += get_nvdimm_info(dimm, imc, i, j);
- }
- if (ndimms && !skx_check_ecc(imc->chan[0].cdev)) {
- skx_printk(KERN_ERR, "ECC is disabled on imc %d\n", imc->mc);
- return -ENODEV;
- }
- }
-
- return 0;
-}
-
-static void skx_unregister_mci(struct skx_imc *imc)
-{
- struct mem_ctl_info *mci = imc->mci;
-
- if (!mci)
- return;
-
- edac_dbg(0, "MC%d: mci = %p\n", imc->mc, mci);
-
- /* Remove MC sysfs nodes */
- edac_mc_del_mc(mci->pdev);
-
- edac_dbg(1, "%s: free mci struct\n", mci->ctl_name);
- kfree(mci->ctl_name);
- edac_mc_free(mci);
-}
-
-static int skx_register_mci(struct skx_imc *imc)
-{
- struct mem_ctl_info *mci;
- struct edac_mc_layer layers[2];
- struct pci_dev *pdev = imc->chan[0].cdev;
- struct skx_pvt *pvt;
- int rc;
-
- /* allocate a new MC control structure */
- layers[0].type = EDAC_MC_LAYER_CHANNEL;
- layers[0].size = NUM_CHANNELS;
- layers[0].is_virt_csrow = false;
- layers[1].type = EDAC_MC_LAYER_SLOT;
- layers[1].size = NUM_DIMMS;
- layers[1].is_virt_csrow = true;
- mci = edac_mc_alloc(imc->mc, ARRAY_SIZE(layers), layers,
- sizeof(struct skx_pvt));
-
- if (unlikely(!mci))
- return -ENOMEM;
-
- edac_dbg(0, "MC#%d: mci = %p\n", imc->mc, mci);
-
- /* Associate skx_dev and mci for future usage */
- imc->mci = mci;
- pvt = mci->pvt_info;
- pvt->imc = imc;
-
- mci->ctl_name = kasprintf(GFP_KERNEL, "Skylake Socket#%d IMC#%d",
- imc->node_id, imc->lmc);
- if (!mci->ctl_name) {
- rc = -ENOMEM;
- goto fail0;
- }
-
- mci->mtype_cap = MEM_FLAG_DDR4 | MEM_FLAG_NVDIMM;
- mci->edac_ctl_cap = EDAC_FLAG_NONE;
- mci->edac_cap = EDAC_FLAG_NONE;
- mci->mod_name = EDAC_MOD_STR;
- mci->dev_name = pci_name(imc->chan[0].cdev);
- mci->ctl_page_to_phys = NULL;
-
- rc = skx_get_dimm_config(mci);
- if (rc < 0)
- goto fail;
-
- /* record ptr to the generic device */
- mci->pdev = &pdev->dev;
-
- /* add this new MC control structure to EDAC's list of MCs */
- if (unlikely(edac_mc_add_mc(mci))) {
- edac_dbg(0, "MC: failed edac_mc_add_mc()\n");
- rc = -EINVAL;
- goto fail;
- }
-
- return 0;
-
-fail:
- kfree(mci->ctl_name);
-fail0:
- edac_mc_free(mci);
- imc->mci = NULL;
- return rc;
-}
-
-#define SKX_MAX_SAD 24
-
-#define SKX_GET_SAD(d, i, reg) \
- pci_read_config_dword((d)->sad_all, 0x60 + 8 * (i), &reg)
-#define SKX_GET_ILV(d, i, reg) \
- pci_read_config_dword((d)->sad_all, 0x64 + 8 * (i), &reg)
-
-#define SKX_SAD_MOD3MODE(sad) GET_BITFIELD((sad), 30, 31)
-#define SKX_SAD_MOD3(sad) GET_BITFIELD((sad), 27, 27)
-#define SKX_SAD_LIMIT(sad) (((u64)GET_BITFIELD((sad), 7, 26) << 26) | MASK26)
-#define SKX_SAD_MOD3ASMOD2(sad) GET_BITFIELD((sad), 5, 6)
-#define SKX_SAD_ATTR(sad) GET_BITFIELD((sad), 3, 4)
-#define SKX_SAD_INTERLEAVE(sad) GET_BITFIELD((sad), 1, 2)
-#define SKX_SAD_ENABLE(sad) GET_BITFIELD((sad), 0, 0)
-
-#define SKX_ILV_REMOTE(tgt) (((tgt) & 8) == 0)
-#define SKX_ILV_TARGET(tgt) ((tgt) & 7)
-
-static bool skx_sad_decode(struct decoded_addr *res)
-{
- struct skx_dev *d = list_first_entry(&skx_edac_list, typeof(*d), list);
- u64 addr = res->addr;
- int i, idx, tgt, lchan, shift;
- u32 sad, ilv;
- u64 limit, prev_limit;
- int remote = 0;
-
- /* Simple sanity check for I/O space or out of range */
- if (addr >= skx_tohm || (addr >= skx_tolm && addr < BIT_ULL(32))) {
- edac_dbg(0, "Address 0x%llx out of range\n", addr);
- return false;
- }
-
-restart:
- prev_limit = 0;
- for (i = 0; i < SKX_MAX_SAD; i++) {
- SKX_GET_SAD(d, i, sad);
- limit = SKX_SAD_LIMIT(sad);
- if (SKX_SAD_ENABLE(sad)) {
- if (addr >= prev_limit && addr <= limit)
- goto sad_found;
- }
- prev_limit = limit + 1;
- }
- edac_dbg(0, "No SAD entry for 0x%llx\n", addr);
- return false;
-
-sad_found:
- SKX_GET_ILV(d, i, ilv);
-
- switch (SKX_SAD_INTERLEAVE(sad)) {
- case 0:
- idx = GET_BITFIELD(addr, 6, 8);
- break;
- case 1:
- idx = GET_BITFIELD(addr, 8, 10);
- break;
- case 2:
- idx = GET_BITFIELD(addr, 12, 14);
- break;
- case 3:
- idx = GET_BITFIELD(addr, 30, 32);
- break;
- }
-
- tgt = GET_BITFIELD(ilv, 4 * idx, 4 * idx + 3);
-
- /* If point to another node, find it and start over */
- if (SKX_ILV_REMOTE(tgt)) {
- if (remote) {
- edac_dbg(0, "Double remote!\n");
- return false;
- }
- remote = 1;
- list_for_each_entry(d, &skx_edac_list, list) {
- if (d->imc[0].src_id == SKX_ILV_TARGET(tgt))
- goto restart;
- }
- edac_dbg(0, "Can't find node %d\n", SKX_ILV_TARGET(tgt));
- return false;
- }
-
- if (SKX_SAD_MOD3(sad) == 0)
- lchan = SKX_ILV_TARGET(tgt);
- else {
- switch (SKX_SAD_MOD3MODE(sad)) {
- case 0:
- shift = 6;
- break;
- case 1:
- shift = 8;
- break;
- case 2:
- shift = 12;
- break;
- default:
- edac_dbg(0, "illegal mod3mode\n");
- return false;
- }
- switch (SKX_SAD_MOD3ASMOD2(sad)) {
- case 0:
- lchan = (addr >> shift) % 3;
- break;
- case 1:
- lchan = (addr >> shift) % 2;
- break;
- case 2:
- lchan = (addr >> shift) % 2;
- lchan = (lchan << 1) | !lchan;
- break;
- case 3:
- lchan = ((addr >> shift) % 2) << 1;
- break;
- }
- lchan = (lchan << 1) | (SKX_ILV_TARGET(tgt) & 1);
- }
-
- res->dev = d;
- res->socket = d->imc[0].src_id;
- res->imc = GET_BITFIELD(d->mcroute, lchan * 3, lchan * 3 + 2);
- res->channel = GET_BITFIELD(d->mcroute, lchan * 2 + 18, lchan * 2 + 19);
-
- edac_dbg(2, "0x%llx: socket=%d imc=%d channel=%d\n",
- res->addr, res->socket, res->imc, res->channel);
- return true;
-}
-
-#define SKX_MAX_TAD 8
-
-#define SKX_GET_TADBASE(d, mc, i, reg) \
- pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x850 + 4 * (i), &reg)
-#define SKX_GET_TADWAYNESS(d, mc, i, reg) \
- pci_read_config_dword((d)->imc[mc].chan[0].cdev, 0x880 + 4 * (i), &reg)
-#define SKX_GET_TADCHNILVOFFSET(d, mc, ch, i, reg) \
- pci_read_config_dword((d)->imc[mc].chan[ch].cdev, 0x90 + 4 * (i), &reg)
-
-#define SKX_TAD_BASE(b) ((u64)GET_BITFIELD((b), 12, 31) << 26)
-#define SKX_TAD_SKT_GRAN(b) GET_BITFIELD((b), 4, 5)
-#define SKX_TAD_CHN_GRAN(b) GET_BITFIELD((b), 6, 7)
-#define SKX_TAD_LIMIT(b) (((u64)GET_BITFIELD((b), 12, 31) << 26) | MASK26)
-#define SKX_TAD_OFFSET(b) ((u64)GET_BITFIELD((b), 4, 23) << 26)
-#define SKX_TAD_SKTWAYS(b) (1 << GET_BITFIELD((b), 10, 11))
-#define SKX_TAD_CHNWAYS(b) (GET_BITFIELD((b), 8, 9) + 1)
-
-/* which bit used for both socket and channel interleave */
-static int skx_granularity[] = { 6, 8, 12, 30 };
-
-static u64 skx_do_interleave(u64 addr, int shift, int ways, u64 lowbits)
-{
- addr >>= shift;
- addr /= ways;
- addr <<= shift;
-
- return addr | (lowbits & ((1ull << shift) - 1));
-}
-
-static bool skx_tad_decode(struct decoded_addr *res)
-{
- int i;
- u32 base, wayness, chnilvoffset;
- int skt_interleave_bit, chn_interleave_bit;
- u64 channel_addr;
-
- for (i = 0; i < SKX_MAX_TAD; i++) {
- SKX_GET_TADBASE(res->dev, res->imc, i, base);
- SKX_GET_TADWAYNESS(res->dev, res->imc, i, wayness);
- if (SKX_TAD_BASE(base) <= res->addr && res->addr <= SKX_TAD_LIMIT(wayness))
- goto tad_found;
- }
- edac_dbg(0, "No TAD entry for 0x%llx\n", res->addr);
- return false;
-
-tad_found:
- res->sktways = SKX_TAD_SKTWAYS(wayness);
- res->chanways = SKX_TAD_CHNWAYS(wayness);
- skt_interleave_bit = skx_granularity[SKX_TAD_SKT_GRAN(base)];
- chn_interleave_bit = skx_granularity[SKX_TAD_CHN_GRAN(base)];
-
- SKX_GET_TADCHNILVOFFSET(res->dev, res->imc, res->channel, i, chnilvoffset);
- channel_addr = res->addr - SKX_TAD_OFFSET(chnilvoffset);
-
- if (res->chanways == 3 && skt_interleave_bit > chn_interleave_bit) {
- /* Must handle channel first, then socket */
- channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit,
- res->chanways, channel_addr);
- channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit,
- res->sktways, channel_addr);
- } else {
- /* Handle socket then channel. Preserve low bits from original address */
- channel_addr = skx_do_interleave(channel_addr, skt_interleave_bit,
- res->sktways, res->addr);
- channel_addr = skx_do_interleave(channel_addr, chn_interleave_bit,
- res->chanways, res->addr);
- }
-
- res->chan_addr = channel_addr;
-
- edac_dbg(2, "0x%llx: chan_addr=0x%llx sktways=%d chanways=%d\n",
- res->addr, res->chan_addr, res->sktways, res->chanways);
- return true;
-}
-
-#define SKX_MAX_RIR 4
-
-#define SKX_GET_RIRWAYNESS(d, mc, ch, i, reg) \
- pci_read_config_dword((d)->imc[mc].chan[ch].cdev, \
- 0x108 + 4 * (i), &reg)
-#define SKX_GET_RIRILV(d, mc, ch, idx, i, reg) \
- pci_read_config_dword((d)->imc[mc].chan[ch].cdev, \
- 0x120 + 16 * idx + 4 * (i), &reg)
-
-#define SKX_RIR_VALID(b) GET_BITFIELD((b), 31, 31)
-#define SKX_RIR_LIMIT(b) (((u64)GET_BITFIELD((b), 1, 11) << 29) | MASK29)
-#define SKX_RIR_WAYS(b) (1 << GET_BITFIELD((b), 28, 29))
-#define SKX_RIR_CHAN_RANK(b) GET_BITFIELD((b), 16, 19)
-#define SKX_RIR_OFFSET(b) ((u64)(GET_BITFIELD((b), 2, 15) << 26))
-
-static bool skx_rir_decode(struct decoded_addr *res)
-{
- int i, idx, chan_rank;
- int shift;
- u32 rirway, rirlv;
- u64 rank_addr, prev_limit = 0, limit;
-
- if (res->dev->imc[res->imc].chan[res->channel].dimms[0].close_pg)
- shift = 6;
- else
- shift = 13;
-
- for (i = 0; i < SKX_MAX_RIR; i++) {
- SKX_GET_RIRWAYNESS(res->dev, res->imc, res->channel, i, rirway);
- limit = SKX_RIR_LIMIT(rirway);
- if (SKX_RIR_VALID(rirway)) {
- if (prev_limit <= res->chan_addr &&
- res->chan_addr <= limit)
- goto rir_found;
- }
- prev_limit = limit;
- }
- edac_dbg(0, "No RIR entry for 0x%llx\n", res->addr);
- return false;
-
-rir_found:
- rank_addr = res->chan_addr >> shift;
- rank_addr /= SKX_RIR_WAYS(rirway);
- rank_addr <<= shift;
- rank_addr |= res->chan_addr & GENMASK_ULL(shift - 1, 0);
-
- res->rank_address = rank_addr;
- idx = (res->chan_addr >> shift) % SKX_RIR_WAYS(rirway);
-
- SKX_GET_RIRILV(res->dev, res->imc, res->channel, idx, i, rirlv);
- res->rank_address = rank_addr - SKX_RIR_OFFSET(rirlv);
- chan_rank = SKX_RIR_CHAN_RANK(rirlv);
- res->channel_rank = chan_rank;
- res->dimm = chan_rank / 4;
- res->rank = chan_rank % 4;
-
- edac_dbg(2, "0x%llx: dimm=%d rank=%d chan_rank=%d rank_addr=0x%llx\n",
- res->addr, res->dimm, res->rank,
- res->channel_rank, res->rank_address);
- return true;
-}
-
-static u8 skx_close_row[] = {
- 15, 16, 17, 18, 20, 21, 22, 28, 10, 11, 12, 13, 29, 30, 31, 32, 33
-};
-static u8 skx_close_column[] = {
- 3, 4, 5, 14, 19, 23, 24, 25, 26, 27
-};
-static u8 skx_open_row[] = {
- 14, 15, 16, 20, 28, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33
-};
-static u8 skx_open_column[] = {
- 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
-};
-static u8 skx_open_fine_column[] = {
- 3, 4, 5, 7, 8, 9, 10, 11, 12, 13
-};
-
-static int skx_bits(u64 addr, int nbits, u8 *bits)
-{
- int i, res = 0;
-
- for (i = 0; i < nbits; i++)
- res |= ((addr >> bits[i]) & 1) << i;
- return res;
-}
-
-static int skx_bank_bits(u64 addr, int b0, int b1, int do_xor, int x0, int x1)
-{
- int ret = GET_BITFIELD(addr, b0, b0) | (GET_BITFIELD(addr, b1, b1) << 1);
-
- if (do_xor)
- ret ^= GET_BITFIELD(addr, x0, x0) | (GET_BITFIELD(addr, x1, x1) << 1);
-
- return ret;
-}
-
-static bool skx_mad_decode(struct decoded_addr *r)
-{
- struct skx_dimm *dimm = &r->dev->imc[r->imc].chan[r->channel].dimms[r->dimm];
- int bg0 = dimm->fine_grain_bank ? 6 : 13;
-
- if (dimm->close_pg) {
- r->row = skx_bits(r->rank_address, dimm->rowbits, skx_close_row);
- r->column = skx_bits(r->rank_address, dimm->colbits, skx_close_column);
- r->column |= 0x400; /* C10 is autoprecharge, always set */
- r->bank_address = skx_bank_bits(r->rank_address, 8, 9, dimm->bank_xor_enable, 22, 28);
- r->bank_group = skx_bank_bits(r->rank_address, 6, 7, dimm->bank_xor_enable, 20, 21);
- } else {
- r->row = skx_bits(r->rank_address, dimm->rowbits, skx_open_row);
- if (dimm->fine_grain_bank)
- r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_fine_column);
- else
- r->column = skx_bits(r->rank_address, dimm->colbits, skx_open_column);
- r->bank_address = skx_bank_bits(r->rank_address, 18, 19, dimm->bank_xor_enable, 22, 23);
- r->bank_group = skx_bank_bits(r->rank_address, bg0, 17, dimm->bank_xor_enable, 20, 21);
- }
- r->row &= (1u << dimm->rowbits) - 1;
-
- edac_dbg(2, "0x%llx: row=0x%x col=0x%x bank_addr=%d bank_group=%d\n",
- r->addr, r->row, r->column, r->bank_address,
- r->bank_group);
- return true;
-}
-
-static bool skx_decode(struct decoded_addr *res)
-{
-
- return skx_sad_decode(res) && skx_tad_decode(res) &&
- skx_rir_decode(res) && skx_mad_decode(res);
-}
-
-static bool skx_adxl_decode(struct decoded_addr *res)
-
-{
- int i, len = 0;
-
- if (res->addr >= skx_tohm || (res->addr >= skx_tolm &&
- res->addr < BIT_ULL(32))) {
- edac_dbg(0, "Address 0x%llx out of range\n", res->addr);
- return false;
- }
-
- if (adxl_decode(res->addr, adxl_values)) {
- edac_dbg(0, "Failed to decode 0x%llx\n", res->addr);
- return false;
- }
-
- res->socket = (int)adxl_values[component_indices[INDEX_SOCKET]];
- res->imc = (int)adxl_values[component_indices[INDEX_MEMCTRL]];
- res->channel = (int)adxl_values[component_indices[INDEX_CHANNEL]];
- res->dimm = (int)adxl_values[component_indices[INDEX_DIMM]];
-
- for (i = 0; i < adxl_component_count; i++) {
- if (adxl_values[i] == ~0x0ull)
- continue;
-
- len += snprintf(adxl_msg + len, MSG_SIZE - len, " %s:0x%llx",
- adxl_component_names[i], adxl_values[i]);
- if (MSG_SIZE - len <= 0)
- break;
- }
-
- return true;
-}
-
-static void skx_mce_output_error(struct mem_ctl_info *mci,
- const struct mce *m,
- struct decoded_addr *res)
-{
- enum hw_event_mc_err_type tp_event;
- char *type, *optype;
- bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0);
- bool overflow = GET_BITFIELD(m->status, 62, 62);
- bool uncorrected_error = GET_BITFIELD(m->status, 61, 61);
- bool recoverable;
- u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52);
- u32 mscod = GET_BITFIELD(m->status, 16, 31);
- u32 errcode = GET_BITFIELD(m->status, 0, 15);
- u32 optypenum = GET_BITFIELD(m->status, 4, 6);
-
- recoverable = GET_BITFIELD(m->status, 56, 56);
-
- if (uncorrected_error) {
- core_err_cnt = 1;
- if (ripv) {
- type = "FATAL";
- tp_event = HW_EVENT_ERR_FATAL;
- } else {
- type = "NON_FATAL";
- tp_event = HW_EVENT_ERR_UNCORRECTED;
- }
- } else {
- type = "CORRECTED";
- tp_event = HW_EVENT_ERR_CORRECTED;
- }
-
- /*
- * According with Table 15-9 of the Intel Architecture spec vol 3A,
- * memory errors should fit in this mask:
- * 000f 0000 1mmm cccc (binary)
- * where:
- * f = Correction Report Filtering Bit. If 1, subsequent errors
- * won't be shown
- * mmm = error type
- * cccc = channel
- * If the mask doesn't match, report an error to the parsing logic
- */
- if (!((errcode & 0xef80) == 0x80)) {
- optype = "Can't parse: it is not a mem";
- } else {
- switch (optypenum) {
- case 0:
- optype = "generic undef request error";
- break;
- case 1:
- optype = "memory read error";
- break;
- case 2:
- optype = "memory write error";
- break;
- case 3:
- optype = "addr/cmd error";
- break;
- case 4:
- optype = "memory scrubbing error";
- break;
- default:
- optype = "reserved";
- break;
- }
- }
- if (adxl_component_count) {
- snprintf(skx_msg, MSG_SIZE, "%s%s err_code:0x%04x:0x%04x %s",
- overflow ? " OVERFLOW" : "",
- (uncorrected_error && recoverable) ? " recoverable" : "",
- mscod, errcode, adxl_msg);
- } else {
- snprintf(skx_msg, MSG_SIZE,
- "%s%s err_code:0x%04x:0x%04x socket:%d imc:%d rank:%d bg:%d ba:%d row:0x%x col:0x%x",
- overflow ? " OVERFLOW" : "",
- (uncorrected_error && recoverable) ? " recoverable" : "",
- mscod, errcode,
- res->socket, res->imc, res->rank,
- res->bank_group, res->bank_address, res->row, res->column);
- }
-
- edac_dbg(0, "%s\n", skx_msg);
-
- /* Call the helper to output message */
- edac_mc_handle_error(tp_event, mci, core_err_cnt,
- m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0,
- res->channel, res->dimm, -1,
- optype, skx_msg);
-}
-
-static struct mem_ctl_info *get_mci(int src_id, int lmc)
-{
- struct skx_dev *d;
-
- if (lmc > NUM_IMC - 1) {
- skx_printk(KERN_ERR, "Bad lmc %d\n", lmc);
- return NULL;
- }
-
- list_for_each_entry(d, &skx_edac_list, list) {
- if (d->imc[0].src_id == src_id)
- return d->imc[lmc].mci;
- }
-
- skx_printk(KERN_ERR, "No mci for src_id %d lmc %d\n", src_id, lmc);
-
- return NULL;
-}
-
-static int skx_mce_check_error(struct notifier_block *nb, unsigned long val,
- void *data)
-{
- struct mce *mce = (struct mce *)data;
- struct decoded_addr res;
- struct mem_ctl_info *mci;
- char *type;
-
- if (edac_get_report_status() == EDAC_REPORTING_DISABLED)
- return NOTIFY_DONE;
-
- /* ignore unless this is memory related with an address */
- if ((mce->status & 0xefff) >> 7 != 1 || !(mce->status & MCI_STATUS_ADDRV))
- return NOTIFY_DONE;
-
- memset(&res, 0, sizeof(res));
- res.addr = mce->addr;
-
- if (adxl_component_count) {
- if (!skx_adxl_decode(&res))
- return NOTIFY_DONE;
-
- mci = get_mci(res.socket, res.imc);
- } else {
- if (!skx_decode(&res))
- return NOTIFY_DONE;
-
- mci = res.dev->imc[res.imc].mci;
- }
-
- if (!mci)
- return NOTIFY_DONE;
-
- if (mce->mcgstatus & MCG_STATUS_MCIP)
- type = "Exception";
- else
- type = "Event";
-
- skx_mc_printk(mci, KERN_DEBUG, "HANDLING MCE MEMORY ERROR\n");
-
- skx_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: 0x%llx "
- "Bank %d: %016Lx\n", mce->extcpu, type,
- mce->mcgstatus, mce->bank, mce->status);
- skx_mc_printk(mci, KERN_DEBUG, "TSC 0x%llx ", mce->tsc);
- skx_mc_printk(mci, KERN_DEBUG, "ADDR 0x%llx ", mce->addr);
- skx_mc_printk(mci, KERN_DEBUG, "MISC 0x%llx ", mce->misc);
-
- skx_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:0x%x TIME %llu SOCKET "
- "%u APIC 0x%x\n", mce->cpuvendor, mce->cpuid,
- mce->time, mce->socketid, mce->apicid);
-
- skx_mce_output_error(mci, mce, &res);
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block skx_mce_dec = {
- .notifier_call = skx_mce_check_error,
- .priority = MCE_PRIO_EDAC,
-};
-
-#ifdef CONFIG_EDAC_DEBUG
-/*
- * Debug feature.
- * Exercise the address decode logic by writing an address to
- * /sys/kernel/debug/edac/skx_test/addr.
- */
-static struct dentry *skx_test;
-
-static int debugfs_u64_set(void *data, u64 val)
-{
- struct mce m;
-
- pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val);
-
- memset(&m, 0, sizeof(m));
- /* ADDRV + MemRd + Unknown channel */
- m.status = MCI_STATUS_ADDRV + 0x90;
- /* One corrected error */
- m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT);
- m.addr = val;
- skx_mce_check_error(NULL, 0, &m);
-
- return 0;
-}
-DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
-
-static void setup_skx_debug(void)
-{
- skx_test = edac_debugfs_create_dir("skx_test");
- if (!skx_test)
- return;
-
- if (!edac_debugfs_create_file("addr", 0200, skx_test,
- NULL, &fops_u64_wo)) {
- debugfs_remove(skx_test);
- skx_test = NULL;
- }
-}
-
-static void teardown_skx_debug(void)
-{
- debugfs_remove_recursive(skx_test);
-}
-#else
-static void setup_skx_debug(void) {}
-static void teardown_skx_debug(void) {}
-#endif /*CONFIG_EDAC_DEBUG*/
-
-static void skx_remove(void)
-{
- int i, j;
- struct skx_dev *d, *tmp;
-
- edac_dbg(0, "\n");
-
- list_for_each_entry_safe(d, tmp, &skx_edac_list, list) {
- list_del(&d->list);
- for (i = 0; i < NUM_IMC; i++) {
- skx_unregister_mci(&d->imc[i]);
- for (j = 0; j < NUM_CHANNELS; j++)
- pci_dev_put(d->imc[i].chan[j].cdev);
- }
- pci_dev_put(d->util_all);
- pci_dev_put(d->sad_all);
-
- kfree(d);
- }
-}
-
-static void __init skx_adxl_get(void)
-{
- const char * const *names;
- int i, j;
-
- names = adxl_get_component_names();
- if (!names) {
- skx_printk(KERN_NOTICE, "No firmware support for address translation.");
- skx_printk(KERN_CONT, " Only decoding DDR4 address!\n");
- return;
- }
-
- for (i = 0; i < INDEX_MAX; i++) {
- for (j = 0; names[j]; j++) {
- if (!strcmp(component_names[i], names[j])) {
- component_indices[i] = j;
- break;
- }
- }
-
- if (!names[j])
- goto err;
- }
-
- adxl_component_names = names;
- while (*names++)
- adxl_component_count++;
-
- adxl_values = kcalloc(adxl_component_count, sizeof(*adxl_values),
- GFP_KERNEL);
- if (!adxl_values) {
- adxl_component_count = 0;
- return;
- }
-
- adxl_msg = kzalloc(MSG_SIZE, GFP_KERNEL);
- if (!adxl_msg) {
- adxl_component_count = 0;
- kfree(adxl_values);
- }
-
- return;
-err:
- skx_printk(KERN_ERR, "'%s' is not matched from DSM parameters: ",
- component_names[i]);
- for (j = 0; names[j]; j++)
- skx_printk(KERN_CONT, "%s ", names[j]);
- skx_printk(KERN_CONT, "\n");
-}
-
-static void __exit skx_adxl_put(void)
-{
- kfree(adxl_values);
- kfree(adxl_msg);
-}
-
-/*
- * skx_init:
- * make sure we are running on the correct cpu model
- * search for all the devices we need
- * check which DIMMs are present.
- */
-static int __init skx_init(void)
-{
- const struct x86_cpu_id *id;
- const struct munit *m;
- const char *owner;
- int rc = 0, i;
- u8 mc = 0, src_id, node_id;
- struct skx_dev *d;
-
- edac_dbg(2, "\n");
-
- owner = edac_get_owner();
- if (owner && strncmp(owner, EDAC_MOD_STR, sizeof(EDAC_MOD_STR)))
- return -EBUSY;
-
- id = x86_match_cpu(skx_cpuids);
- if (!id)
- return -ENODEV;
-
- rc = skx_get_hi_lo();
- if (rc)
- return rc;
-
- rc = get_all_bus_mappings();
- if (rc < 0)
- goto fail;
- if (rc == 0) {
- edac_dbg(2, "No memory controllers found\n");
- return -ENODEV;
- }
-
- for (m = skx_all_munits; m->did; m++) {
- rc = get_all_munits(m);
- if (rc < 0)
- goto fail;
- if (rc != m->per_socket * skx_num_sockets) {
- edac_dbg(2, "Expected %d, got %d of 0x%x\n",
- m->per_socket * skx_num_sockets, rc, m->did);
- rc = -ENODEV;
- goto fail;
- }
- }
-
- list_for_each_entry(d, &skx_edac_list, list) {
- src_id = get_src_id(d);
- node_id = skx_get_node_id(d);
- edac_dbg(2, "src_id=%d node_id=%d\n", src_id, node_id);
- for (i = 0; i < NUM_IMC; i++) {
- d->imc[i].mc = mc++;
- d->imc[i].lmc = i;
- d->imc[i].src_id = src_id;
- d->imc[i].node_id = node_id;
- rc = skx_register_mci(&d->imc[i]);
- if (rc < 0)
- goto fail;
- }
- }
-
- skx_msg = kzalloc(MSG_SIZE, GFP_KERNEL);
- if (!skx_msg) {
- rc = -ENOMEM;
- goto fail;
- }
-
- if (nvdimm_count)
- skx_adxl_get();
-
- /* Ensure that the OPSTATE is set correctly for POLL or NMI */
- opstate_init();
-
- setup_skx_debug();
-
- mce_register_decode_chain(&skx_mce_dec);
-
- return 0;
-fail:
- skx_remove();
- return rc;
-}
-
-static void __exit skx_exit(void)
-{
- edac_dbg(2, "\n");
- mce_unregister_decode_chain(&skx_mce_dec);
- teardown_skx_debug();
- if (nvdimm_count)
- skx_adxl_put();
- kfree(skx_msg);
- skx_remove();
-}
-
-module_init(skx_init);
-module_exit(skx_exit);
-
-module_param(edac_op_state, int, 0444);
-MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Tony Luck");
-MODULE_DESCRIPTION("MC Driver for Intel Skylake server processors");
--
2.19.1
\
 
 \ /
  Last update: 2019-01-25 21:00    [W:0.119 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site