lkml.org 
[lkml]   [2019]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/2] leds: lp50xx: Add the LP50XX family of the RGB LED driver
From
Date
Jacek

Replying to code comments.

On 1/15/19 3:47 PM, Jacek Anaszewski wrote:
> Hi Da,
>
> Thank you for the v2.
>

I will probably submit v3 outside the realm of the multi color framework.
We can always convert as Pavel pointed out.

> I have some remarks below.
>
> On 1/14/19 10:17 PM, Dan Murphy wrote:
>> Introduce the LP5036/30/24/18 RGB LED driver.
>> The difference in these parts are the number of
>> LED outputs where the:
>>
>> LP5036 can control 36 LEDs
>> LP5030 can control 30 LEDs
>> LP5024 can control 24 LEDs
>> LP5018 can control 18 LEDs
>>
>> The device has the ability to group LED output into control banks
>> so that multiple LED banks can be controlled with the same mixing and
>> brightness.  Inversely the LEDs can also be controlled independently.
>>
>> Signed-off-by: Dan Murphy <dmurphy@ti.com>
>> ---
>>
>> v2 - Changed the mix and module files to a single "color" file, added the LP5030
>> and LP5036 register mapping, added ABI documentation, updated the parsing of
>> DT and led sources to match DT, renamed driver to leds-lp50xx.c - https://lore.kernel.org/patchwork/patch/1026515/
>>
>>   Documentation/leds/leds-lp50xx.txt |  36 ++
>>   drivers/leds/Kconfig               |   7 +
>>   drivers/leds/Makefile              |   1 +
>>   drivers/leds/leds-lp50xx.c         | 754 +++++++++++++++++++++++++++++
>>   4 files changed, 798 insertions(+)
>>   create mode 100644 Documentation/leds/leds-lp50xx.txt
>>   create mode 100644 drivers/leds/leds-lp50xx.c
>>
>> diff --git a/Documentation/leds/leds-lp50xx.txt b/Documentation/leds/leds-lp50xx.txt
>
> Please move it to
>
> Documentation/ABI/testing/sysfs-class-led-driver-lp50xx
>
> and use standard ABI documentation format.
>

Ack. I will add this file as well per the doc format.

>
>> new file mode 100644
>> index 000000000000..8b1b01dfdd22
>> --- /dev/null
>> +++ b/Documentation/leds/leds-lp50xx.txt
>> @@ -0,0 +1,36 @@
>> +LP5018/LP5024/LP5030/LP5036 Common Driver
>> +=================================================
>> +
>> +Authors: Dan Murphy <dmurphy@ti.com>
>> +
>> +Description
>> +-----------
>> +The LP50XX RGB LED drivers have the ability to group multiple RGB cluster
>> +LEDs into a single group for simultaneous control or expose single RGB cluster
>> +for control.  This device exposes different register interfaces to control
>> +the cluster brightness as well as the individual RGB LEDs color intensity.
>> +
>> +RGB Cluster Color Control
>> +-------------------------
>> +The LP50xx driver will expose a file called "color" for each LED class instance
>> +defined.  This file will accept a 24-bit RGB value in which the the color of the
>> +RGB LEDs will be set.
>> +
>> +The 24-bit RGB value passed in follows the pattern 0xXXRRGGBB
>> +XX - Do not care ignored by the driver
>> +RR - is the 8 bit Red LED value
>> +GG - is the 8 bit Green LED value
>> +BB - is the 8 bit Blue LED value
>> +
>> +Example:
>> +LED module output 4 of the LP5024 will be a yellow color:
>> +echo 0xe6de00 > /sys/class/leds/lp5024\:led4_mod/color
>> +
>> +LED module output 4 of the LP5024 will be dimmed 50%:
>> +echo 0x80 > /sys/class/leds/lp5024\:led4_mod/brightness
>> +
>> +LED banked RGBs of the LP5036 will be a white color:
>> +echo 0xffffff > /sys/class/leds/lp5036\:led_banked/color
>
> This part with example cans remain in Documentation/leds if you like.
>
>> +
>> +LED banked RGBs of the LP50364 will be dimmed 50%:
>> +echo 0x80 > /sys/class/leds/lp5036\:led_banked/brightness
>> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
>> index a72f97fca57b..5f413445a667 100644
>> --- a/drivers/leds/Kconfig
>> +++ b/drivers/leds/Kconfig
>> @@ -326,6 +326,13 @@ config LEDS_LP3952
>>         To compile this driver as a module, choose M here: the
>>         module will be called leds-lp3952.
>>   +config LEDS_LP50XX
>> +    tristate "LED Support for TI LP5036/30/24/18 LED driver chip"
>> +    depends on LEDS_CLASS && REGMAP_I2C
>> +    help
>> +      If you say yes here you get support for the Texas Instruments
>> +      LP5036, LP5030, LP5024 and LP5018 LED driver.
>> +
>>   config LEDS_LP55XX_COMMON
>>       tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
>>       depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
>> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
>> index 4c1b0054f379..852eff0b773f 100644
>> --- a/drivers/leds/Makefile
>> +++ b/drivers/leds/Makefile
>> @@ -32,6 +32,7 @@ obj-$(CONFIG_LEDS_GPIO_REGISTER)    += leds-gpio-register.o
>>   obj-$(CONFIG_LEDS_GPIO)            += leds-gpio.o
>>   obj-$(CONFIG_LEDS_LP3944)        += leds-lp3944.o
>>   obj-$(CONFIG_LEDS_LP3952)        += leds-lp3952.o
>> +obj-$(CONFIG_LEDS_LP50XX)        += leds-lp50xx.o
>>   obj-$(CONFIG_LEDS_LP55XX_COMMON)    += leds-lp55xx-common.o
>>   obj-$(CONFIG_LEDS_LP5521)        += leds-lp5521.o
>>   obj-$(CONFIG_LEDS_LP5523)        += leds-lp5523.o
>> diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c
>> new file mode 100644
>> index 000000000000..41bb2e0129c8
>> --- /dev/null
>> +++ b/drivers/leds/leds-lp50xx.c
>> @@ -0,0 +1,754 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/* TI LP50XX LED chip family driver
>> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> + */
>
> Let's use uniform "//" comment style here.

Ack

>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/i2c.h>
>> +#include <linux/init.h>
>> +#include <linux/leds.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/of.h>
>> +#include <linux/of_gpio.h>
>> +#include <linux/regmap.h>
>> +#include <linux/regulator/consumer.h>
>> +#include <linux/slab.h>
>> +#include <uapi/linux/uleds.h>
>> +
>> +#define LP50XX_DEV_CFG0        0x00
>> +#define LP50XX_DEV_CFG1        0x01
>> +#define LP50XX_LED_CFG0        0x02
>> +
>> +/* LP5018 and LP5024 registers */
>> +#define LP5024_BNK_BRT        0x03
>> +#define LP5024_BNKA_CLR        0x04
>> +#define LP5024_BNKB_CLR        0x05
>> +#define LP5024_BNKC_CLR        0x06
>> +#define LP5024_LED0_BRT        0x07
>> +#define LP5024_LED1_BRT        0x08
>> +#define LP5024_LED2_BRT        0x09
>> +#define LP5024_LED3_BRT        0x0a
>> +#define LP5024_LED4_BRT        0x0b
>> +#define LP5024_LED5_BRT        0x0c
>> +#define LP5024_LED6_BRT        0x0d
>> +#define LP5024_LED7_BRT        0x0e
>> +
>> +#define LP5024_OUT0_CLR        0x0f
>> +#define LP5024_OUT1_CLR        0x10
>> +#define LP5024_OUT2_CLR        0x11
>> +#define LP5024_OUT3_CLR        0x12
>> +#define LP5024_OUT4_CLR        0x13
>> +#define LP5024_OUT5_CLR        0x14
>> +#define LP5024_OUT6_CLR        0x15
>> +#define LP5024_OUT7_CLR        0x16
>> +#define LP5024_OUT8_CLR        0x17
>> +#define LP5024_OUT9_CLR        0x18
>> +#define LP5024_OUT10_CLR    0x19
>> +#define LP5024_OUT11_CLR    0x1a
>> +#define LP5024_OUT12_CLR    0x1b
>> +#define LP5024_OUT13_CLR    0x1c
>> +#define LP5024_OUT14_CLR    0x1d
>> +#define LP5024_OUT15_CLR    0x1e
>> +#define LP5024_OUT16_CLR    0x1f
>> +#define LP5024_OUT17_CLR    0x20
>> +#define LP5024_OUT18_CLR    0x21
>> +#define LP5024_OUT19_CLR    0x22
>> +#define LP5024_OUT20_CLR    0x23
>> +#define LP5024_OUT21_CLR    0x24
>> +#define LP5024_OUT22_CLR    0x25
>> +#define LP5024_OUT23_CLR    0x26
>> +#define LP5024_RESET        0x27
>> +
>> +/* LP5030 and LP5036 registers */
>> +#define LP5036_LED_CFG1        0x03
>> +#define LP5036_BNK_BRT        0x04
>> +#define LP5036_BNKA_CLR        0x05
>> +#define LP5036_BNKB_CLR        0x06
>> +#define LP5036_BNKC_CLR        0x07
>> +#define LP5036_LED0_BRT        0x08
>> +#define LP5036_LED1_BRT        0x09
>> +#define LP5036_LED2_BRT        0x0a
>> +#define LP5036_LED3_BRT        0x0b
>> +#define LP5036_LED4_BRT        0x0c
>> +#define LP5036_LED5_BRT        0x0d
>> +#define LP5036_LED6_BRT        0x0e
>> +#define LP5036_LED7_BRT        0x0f
>> +#define LP5036_LED8_BRT        0x10
>> +#define LP5036_LED9_BRT        0x11
>> +#define LP5036_LED10_BRT    0x12
>> +#define LP5036_LED11_BRT    0x13
>> +
>> +#define LP5036_OUT0_CLR        0x14
>> +#define LP5036_OUT1_CLR        0x15
>> +#define LP5036_OUT2_CLR        0x16
>> +#define LP5036_OUT3_CLR        0x17
>> +#define LP5036_OUT4_CLR        0x18
>> +#define LP5036_OUT5_CLR        0x19
>> +#define LP5036_OUT6_CLR        0x1a
>> +#define LP5036_OUT7_CLR        0x1b
>> +#define LP5036_OUT8_CLR        0x1c
>> +#define LP5036_OUT9_CLR        0x1d
>> +#define LP5036_OUT10_CLR    0x1e
>> +#define LP5036_OUT11_CLR    0x1f
>> +#define LP5036_OUT12_CLR    0x20
>> +#define LP5036_OUT13_CLR    0x21
>> +#define LP5036_OUT14_CLR    0x22
>> +#define LP5036_OUT15_CLR    0x23
>> +#define LP5036_OUT16_CLR    0x24
>> +#define LP5036_OUT17_CLR    0x25
>> +#define LP5036_OUT18_CLR    0x26
>> +#define LP5036_OUT19_CLR    0x27
>> +#define LP5036_OUT20_CLR    0x28
>> +#define LP5036_OUT21_CLR    0x29
>> +#define LP5036_OUT22_CLR    0x2a
>> +#define LP5036_OUT23_CLR    0x2b
>> +#define LP5036_OUT24_CLR    0x2c
>> +#define LP5036_OUT25_CLR    0x2d
>> +#define LP5036_OUT26_CLR    0x2e
>> +#define LP5036_OUT27_CLR    0x2f
>> +#define LP5036_OUT28_CLR    0x30
>> +#define LP5036_OUT29_CLR    0x31
>> +#define LP5036_OUT30_CLR    0x32
>> +#define LP5036_OUT31_CLR    0x33
>> +#define LP5036_OUT32_CLR    0x34
>> +#define LP5036_OUT33_CLR    0x35
>> +#define LP5036_OUT34_CLR    0x36
>> +#define LP5036_OUT35_CLR    0x37
>> +#define LP5036_RESET        0x38
>> +
>> +#define LP50XX_SW_RESET        0xff
>> +
>> +#define LP50XX_CHIP_EN        BIT(6)
>> +
>> +#define LP5018_MAX_LED_STRINGS    6
>> +#define LP5024_MAX_LED_STRINGS    8
>> +#define LP5030_MAX_LED_STRINGS    10
>> +#define LP5036_MAX_LED_STRINGS    12
>> +
>> +enum lp50xx_model {
>> +    LP5018,
>> +    LP5024,
>> +    LP5030,
>> +    LP5036,
>> +};
>> +
>> +struct lp50xx_led {
>> +    u32 led_strings[LP5036_MAX_LED_STRINGS];
>
> It is possible to have only one bank, so this can be a property
> of struct lp50xx. Moreover, it doesn't need to be an array,
> but should be:
>
> unsigned long bank_modules;
>
> Then you will be able to use bitops on it, where bit position will
> refer to the id of RGB LED module assigned to the bank.
>

ACK. Had to think a bit on this to make sure there was enough room
but aligning on LEDn_MODULES/BANKS should be fine

>> +    char label[LED_MAX_NAME_SIZE];
>> +    struct led_classdev led_dev;
>> +    struct lp50xx *priv;
>> +    int led_number;
>> +    u8 ctrl_bank_enabled;
>> +};
>> +
>> +/**
>> + * struct lp50xx -
>> + * @enable_gpio: Hardware enable gpio
>> + * @regulator: LED supply regulator pointer
>> + * @client: Pointer to the I2C client
>> + * @regmap: Devices register map
>> + * @dev: Pointer to the devices device struct
>> + * @lock: Lock for reading/writing the device
>> + * @model_id: ID of the device
>> + * @leds: Array of LED strings
>
> Please don't use capital letters for property description.
> Still, some of the properties below remain undocumented.
>

You are referring to ID and I2C or do you mean no capitals to start the
description?

Yes I added the properties and missed documenting them.

>> + */
>> +struct lp50xx {
>> +    struct gpio_desc *enable_gpio;
>> +    struct regulator *regulator;
>> +    struct i2c_client *client;
>> +    struct regmap *regmap;
>> +    struct device *dev;
>> +    struct mutex lock;
>> +    enum lp50xx_model model_id;
>> +    int max_leds;
>> +    int num_of_leds;
>> +
>> +    u8 led_brightness0_reg;
>> +    u8 mix_out0_reg;
>> +    u8 bank_brt_reg;
>> +    u8 bank_mix_reg;
>> +    u8 reset_reg;
>> +
>> +    /* This needs to be at the end of the struct */
>> +    struct lp50xx_led leds[];
>> +};
>> +
>> +static const struct reg_default lp5024_reg_defs[] = {
>> +    {LP50XX_DEV_CFG0, 0x0},
>> +    {LP50XX_DEV_CFG1, 0x3c},
>> +    {LP50XX_LED_CFG0, 0x0},
>> +    {LP5024_BNK_BRT, 0xff},
>> +    {LP5024_BNKA_CLR, 0x0f},
>> +    {LP5024_BNKB_CLR, 0x0f},
>> +    {LP5024_BNKC_CLR, 0x0f},
>> +    {LP5024_LED0_BRT, 0x0f},
>> +    {LP5024_LED1_BRT, 0xff},
>> +    {LP5024_LED2_BRT, 0xff},
>> +    {LP5024_LED3_BRT, 0xff},
>> +    {LP5024_LED4_BRT, 0xff},
>> +    {LP5024_LED5_BRT, 0xff},
>> +    {LP5024_LED6_BRT, 0xff},
>> +    {LP5024_LED7_BRT, 0xff},
>> +    {LP5024_OUT0_CLR, 0x0f},
>> +    {LP5024_OUT1_CLR, 0x00},
>> +    {LP5024_OUT2_CLR, 0x00},
>> +    {LP5024_OUT3_CLR, 0x00},
>> +    {LP5024_OUT4_CLR, 0x00},
>> +    {LP5024_OUT5_CLR, 0x00},
>> +    {LP5024_OUT6_CLR, 0x00},
>> +    {LP5024_OUT7_CLR, 0x00},
>> +    {LP5024_OUT8_CLR, 0x00},
>> +    {LP5024_OUT9_CLR, 0x00},
>> +    {LP5024_OUT10_CLR, 0x00},
>> +    {LP5024_OUT11_CLR, 0x00},
>> +    {LP5024_OUT12_CLR, 0x00},
>> +    {LP5024_OUT13_CLR, 0x00},
>> +    {LP5024_OUT14_CLR, 0x00},
>> +    {LP5024_OUT15_CLR, 0x00},
>> +    {LP5024_OUT16_CLR, 0x00},
>> +    {LP5024_OUT17_CLR, 0x00},
>> +    {LP5024_OUT18_CLR, 0x00},
>> +    {LP5024_OUT19_CLR, 0x00},
>> +    {LP5024_OUT20_CLR, 0x00},
>> +    {LP5024_OUT21_CLR, 0x00},
>> +    {LP5024_OUT22_CLR, 0x00},
>> +    {LP5024_OUT23_CLR, 0x00},
>> +    {LP5024_RESET, 0x00}
>> +};
>> +
>> +static const struct reg_default lp5036_reg_defs[] = {
>> +    {LP50XX_DEV_CFG0, 0x0},
>> +    {LP50XX_DEV_CFG1, 0x3c},
>> +    {LP50XX_LED_CFG0, 0x0},
>> +    {LP5036_LED_CFG1, 0x0},
>> +    {LP5036_BNK_BRT, 0xff},
>> +    {LP5036_BNKA_CLR, 0x0f},
>> +    {LP5036_BNKB_CLR, 0x0f},
>> +    {LP5036_BNKC_CLR, 0x0f},
>> +    {LP5036_LED0_BRT, 0x0f},
>> +    {LP5036_LED1_BRT, 0xff},
>> +    {LP5036_LED2_BRT, 0xff},
>> +    {LP5036_LED3_BRT, 0xff},
>> +    {LP5036_LED4_BRT, 0xff},
>> +    {LP5036_LED5_BRT, 0xff},
>> +    {LP5036_LED6_BRT, 0xff},
>> +    {LP5036_LED7_BRT, 0xff},
>> +    {LP5036_OUT0_CLR, 0x0f},
>> +    {LP5036_OUT1_CLR, 0x00},
>> +    {LP5036_OUT2_CLR, 0x00},
>> +    {LP5036_OUT3_CLR, 0x00},
>> +    {LP5036_OUT4_CLR, 0x00},
>> +    {LP5036_OUT5_CLR, 0x00},
>> +    {LP5036_OUT6_CLR, 0x00},
>> +    {LP5036_OUT7_CLR, 0x00},
>> +    {LP5036_OUT8_CLR, 0x00},
>> +    {LP5036_OUT9_CLR, 0x00},
>> +    {LP5036_OUT10_CLR, 0x00},
>> +    {LP5036_OUT11_CLR, 0x00},
>> +    {LP5036_OUT12_CLR, 0x00},
>> +    {LP5036_OUT13_CLR, 0x00},
>> +    {LP5036_OUT14_CLR, 0x00},
>> +    {LP5036_OUT15_CLR, 0x00},
>> +    {LP5036_OUT16_CLR, 0x00},
>> +    {LP5036_OUT17_CLR, 0x00},
>> +    {LP5036_OUT18_CLR, 0x00},
>> +    {LP5036_OUT19_CLR, 0x00},
>> +    {LP5036_OUT20_CLR, 0x00},
>> +    {LP5036_OUT21_CLR, 0x00},
>> +    {LP5036_OUT22_CLR, 0x00},
>> +    {LP5036_OUT23_CLR, 0x00},
>> +    {LP5036_OUT24_CLR, 0x00},
>> +    {LP5036_OUT25_CLR, 0x00},
>> +    {LP5036_OUT26_CLR, 0x00},
>> +    {LP5036_OUT27_CLR, 0x00},
>> +    {LP5036_OUT28_CLR, 0x00},
>> +    {LP5036_OUT29_CLR, 0x00},
>> +    {LP5036_OUT30_CLR, 0x00},
>> +    {LP5036_OUT31_CLR, 0x00},
>> +    {LP5036_OUT32_CLR, 0x00},
>> +    {LP5036_OUT33_CLR, 0x00},
>> +    {LP5036_OUT34_CLR, 0x00},
>> +    {LP5036_OUT35_CLR, 0x00},
>> +    {LP5036_RESET, 0x00}
>> +};
>> +
>> +static const struct regmap_config lp5024_regmap_config = {
>> +    .reg_bits = 8,
>> +    .val_bits = 8,
>> +
>> +    .max_register = LP5024_RESET,
>> +    .reg_defaults = lp5024_reg_defs,
>> +    .num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs),
>> +    .cache_type = REGCACHE_RBTREE,
>> +};
>> +
>> +static const struct regmap_config lp5036_regmap_config = {
>> +    .reg_bits = 8,
>> +    .val_bits = 8,
>> +
>> +    .max_register = LP5036_RESET,
>> +    .reg_defaults = lp5036_reg_defs,
>> +    .num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs),
>> +    .cache_type = REGCACHE_RBTREE,
>> +};
>> +
>> +static ssize_t color_show(struct device *dev,
>> +            struct device_attribute *attr,
>> +            char *buf)
>> +{
>> +    struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> +    struct lp50xx_led *led = container_of(led_cdev, struct lp50xx_led,
>> +                          led_dev);
>> +    struct lp50xx *priv = led->priv;
>> +    unsigned int red_val, green_val, blue_val;
>> +    u8 red_reg, green_reg, blue_reg;
>> +    u32 mix_value = 0;
>> +    u8 led_offset;
>> +    int ret;
>> +
>> +    if (led->ctrl_bank_enabled) {
>> +        red_reg = priv->bank_mix_reg;
>> +        green_reg = priv->bank_mix_reg + 1;
>> +        blue_reg = priv->bank_mix_reg + 2;
>> +    } else {
>> +        led_offset = (led->led_number * 3);
>> +        red_reg = priv->mix_out0_reg + led_offset;
>> +        green_reg = priv->mix_out0_reg + led_offset + 1;
>> +        blue_reg = priv->mix_out0_reg + led_offset + 2;
>> +    }
>> +
>> +    ret = regmap_read(priv->regmap, red_reg, &red_val);
>> +    if (ret) {
>> +        dev_err(&priv->client->dev, "Cannot read LED value\n");
>> +        goto out;
>> +    }
>> +
>> +    ret = regmap_read(priv->regmap, green_reg, &green_val);
>> +    if (ret) {
>> +        dev_err(&priv->client->dev, "Cannot read LED value\n");
>> +        goto out;
>> +    }
>> +
>> +    ret = regmap_read(priv->regmap, blue_reg, &blue_val);
>> +    if (ret) {
>> +        dev_err(&priv->client->dev, "Cannot read LED value\n");
>> +        goto out;
>> +    }
>> +
>> +    mix_value = (red_val << 16 | green_val << 8 | blue_val);
>> +
>> +out:
>> +    return scnprintf(buf, PAGE_SIZE, "0x%X\n", mix_value);
>> +}
>> +
>> +static ssize_t color_store(struct device *dev,
>> +                struct device_attribute *attr,
>> +                const char *buf, size_t size)
>> +{
>> +    struct led_classdev *led_cdev = dev_get_drvdata(dev);
>> +    struct lp50xx_led *led = container_of(led_cdev, struct lp50xx_led,
>> +                          led_dev);
>> +    struct lp50xx *priv = led->priv;
>> +    u8 led_offset;
>> +    unsigned long mix_value;
>> +    u8 red_reg, green_reg, blue_reg;
>> +    u8 red_val, green_val, blue_val;
>> +    int ret;
>> +
>> +    ret = kstrtoul(buf, 0, &mix_value);
>> +    if (ret)
>> +        return ret;
>> +
>> +    if (led->ctrl_bank_enabled) {
>> +        red_reg = priv->bank_mix_reg;
>> +        green_reg = priv->bank_mix_reg + 1;
>> +        blue_reg = priv->bank_mix_reg + 2;
>> +    } else {
>> +        led_offset = (led->led_number * 3);
>> +        red_reg = priv->mix_out0_reg + led_offset;
>> +        green_reg = priv->mix_out0_reg + led_offset + 1;
>> +        blue_reg = priv->mix_out0_reg + led_offset + 2;
>> +    }
>> +
>> +    red_val = (mix_value & 0xff0000) >> 16;
>> +    green_val = (mix_value & 0xff00) >> 8;
>> +    blue_val = (mix_value & 0xff);
>
> I've been rather thinking about space separated list of decimal
> "red green blue" values, but maybe this way it will be less
> controversial. Let's if there will be other opinions.
>

Has anything changed based on this?
Should I change the file name from "color" to something else?

>> +
>> +    ret = regmap_write(priv->regmap, red_reg, red_val);
>> +    if (ret) {
>> +        dev_err(&priv->client->dev, "Cannot write LED value\n");
>> +        goto out;
>> +    }
>> +
>> +    ret = regmap_write(priv->regmap, green_reg, green_val);
>> +    if (ret) {
>> +        dev_err(&priv->client->dev, "Cannot write LED value\n");
>> +        goto out;
>> +    }
>> +
>> +    ret = regmap_write(priv->regmap, blue_reg, blue_val);
>> +    if (ret) {
>> +        dev_err(&priv->client->dev, "Cannot write LED value\n");
>> +        goto out;
>> +    }
>> +out:
>> +    return size;
>> +}
>> +
>> +static DEVICE_ATTR_RW(color);
>> +
>> +static struct attribute *lp50xx_led_color_attrs[] = {
>> +    &dev_attr_color.attr,
>> +    NULL
>> +};
>> +ATTRIBUTE_GROUPS(lp50xx_led_color);
>> +
>> +static int lp50xx_brightness_set(struct led_classdev *led_cdev,
>> +                enum led_brightness brt_val)
>> +{
>> +    struct lp50xx_led *led = container_of(led_cdev, struct lp50xx_led,
>> +                          led_dev);
>> +    int ret = 0;
>> +    u8 reg_val;
>> +
>> +    mutex_lock(&led->priv->lock);
>> +
>> +    if (led->ctrl_bank_enabled)
>> +        reg_val = led->priv->bank_brt_reg;
>> +    else
>> +        reg_val = led->priv->led_brightness0_reg + led->led_number;
>> +
>> +    ret = regmap_write(led->priv->regmap, reg_val, brt_val);
>> +
>> +    mutex_unlock(&led->priv->lock);
>> +
>> +    return ret;
>> +}
>> +
>> +static enum led_brightness lp50xx_brightness_get(struct led_classdev *led_cdev)
>> +{
>> +    struct lp50xx_led *led = container_of(led_cdev, struct lp50xx_led,
>> +                          led_dev);
>> +    unsigned int brt_val;
>> +    u8 reg_val;
>> +    int ret;
>> +
>> +    mutex_lock(&led->priv->lock);
>> +
>> +    if (led->ctrl_bank_enabled)
>> +        reg_val = led->priv->bank_brt_reg;
>> +    else
>> +        reg_val = led->priv->led_brightness0_reg + led->led_number;
>> +
>> +    ret = regmap_read(led->priv->regmap, reg_val, &brt_val);
>> +
>> +    mutex_unlock(&led->priv->lock);
>> +
>> +    return brt_val;
>> +}
>> +
>> +static void lp50xx_set_led_values(struct lp50xx *priv)
>> +{
>> +    if (priv->model_id == LP5018 || priv->model_id == LP5024) {
>> +        priv->led_brightness0_reg = LP5024_LED0_BRT;
>> +        priv->mix_out0_reg = LP5024_OUT0_CLR;
>> +        priv->bank_brt_reg = LP5024_BNK_BRT;
>> +        priv->bank_mix_reg = LP5024_BNKA_CLR;
>> +        priv->reset_reg = LP5024_RESET;
>> +    } else {
>> +        priv->led_brightness0_reg = LP5036_LED0_BRT;
>> +        priv->mix_out0_reg = LP5036_OUT0_CLR;
>> +        priv->bank_brt_reg = LP5036_BNK_BRT;
>> +        priv->bank_mix_reg = LP5036_BNKA_CLR;
>> +        priv->reset_reg = LP5036_RESET;
>> +    }
>> +}
>> +
>> +static int lp50xx_set_banks(struct lp50xx *priv)
>> +{
>> +    struct lp50xx_led *led;
>> +    u8 led_ctrl_enable = 0;
>> +    u8 led1_ctrl_enable = 0;
>> +    u8 ctrl_ext = 0;
>> +    int i, j;
>> +    int ret;
>> +
>> +    for (i = 0; i <= priv->num_of_leds; i++) {
>> +        led = &priv->leds[i];
>> +        if (!led->ctrl_bank_enabled)
>> +            continue;
>> +
>> +        for (j = 0; j <= priv->max_leds - 1; j++) {
>> +            if (led->led_strings[j]    > (LP5024_MAX_LED_STRINGS - 1)) {
>> +                ctrl_ext = led->led_strings[j] - LP5024_MAX_LED_STRINGS;
>> +                led1_ctrl_enable |= (1 << ctrl_ext);
>> +            } else {
>> +                led_ctrl_enable |= (1 << led->led_strings[j]);
>> +            }
>> +        }
>> +    }
>
> With centralized bank_modules flags it should look simpler.
>

I don't think so. The LP5030 and LP5036 have 2 registers to denote Module vs banked.

But once I convert it we will know.

>> +
>> +    ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_ctrl_enable);
>> +
>> +    if (led1_ctrl_enable)
>> +        ret = regmap_write(priv->regmap, LP5036_LED_CFG1,
>> +                   led1_ctrl_enable);
>> +
>> +    return ret;
>> +}
>> +
>> +static int lp50xx_init(struct lp50xx *priv)
>> +{
>> +    int ret;
>> +
>> +    lp50xx_set_led_values(priv);
>> +
>> +    if (priv->enable_gpio) {
>> +        gpiod_direction_output(priv->enable_gpio, 1);
>> +    } else {
>> +        ret = regmap_write(priv->regmap, priv->reset_reg,
>> +                   LP50XX_SW_RESET);
>> +        if (ret) {
>> +            dev_err(&priv->client->dev,
>> +                "Cannot reset the device\n");
>> +            goto out;
>> +        }
>> +    }
>> +
>> +    ret = lp50xx_set_banks(priv);
>> +    if (ret) {
>> +        dev_err(&priv->client->dev, "Cannot set the banks\n");
>> +        goto out;
>> +    }
>> +
>> +    ret = regmap_write(priv->regmap, LP50XX_DEV_CFG0, LP50XX_CHIP_EN);
>> +    if (ret)
>> +        dev_err(&priv->client->dev, "Cannot write ctrl enable\n");
>> +
>> +out:
>> +    return ret;
>> +}
>> +
>> +static int lp50xx_probe_dt(struct lp50xx *priv)
>> +{
>> +    struct fwnode_handle *child = NULL;
>> +    struct lp50xx_led *led;
>> +    int control_bank_defined = 0;
>> +    const char *name;
>> +    int led_number;
>> +    size_t i = 0;
>> +    int ret;
>> +
>> +    priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
>> +                           "enable", GPIOD_OUT_LOW);
>> +    if (IS_ERR(priv->enable_gpio)) {
>> +        ret = PTR_ERR(priv->enable_gpio);
>> +        dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n",
>> +            ret);
>> +        return ret;
>> +    }
>> +
>> +    priv->regulator = devm_regulator_get(&priv->client->dev, "vled");
>> +    if (IS_ERR(priv->regulator))
>> +        priv->regulator = NULL;
>> +
>> +    if (priv->model_id == LP5018)
>> +        priv->max_leds = LP5018_MAX_LED_STRINGS;
>> +    else if (priv->model_id == LP5024)
>> +        priv->max_leds = LP5024_MAX_LED_STRINGS;
>> +    else if (priv->model_id == LP5030)
>> +        priv->max_leds = LP5030_MAX_LED_STRINGS;
>> +    else
>> +        priv->max_leds = LP5036_MAX_LED_STRINGS;
>
> Let's change STRINGS to MODULEs.
>

ACK.

>> +
>> +    device_for_each_child_node(&priv->client->dev, child) {
>> +        led = &priv->leds[i];
>> +
>> +        if (fwnode_property_present(child, "ti,led-bank")) {
>> +            led->ctrl_bank_enabled = 1;
>> +            if (!control_bank_defined)
>> +                control_bank_defined = 1;
>> +            else {
>> +                dev_err(&priv->client->dev,
>> +                    "ti,led-bank defined twice\n");
>> +                fwnode_handle_put(child);
>> +                goto child_out;
>> +            }
>> +        } else {
>> +            led->ctrl_bank_enabled = 0;
>> +        }
>
> Any bit set in bank_modules will signify that bank is defined
> and enabled.
>

This is stored so that when the brightness or color is called the correct
register either bank or LEDn_MODULES is used.

This way I don't have to go out and read the devices bank enable register
and try to determine what was banked and what was not.


Dan

>> +        if (led->ctrl_bank_enabled) {
>> +            ret = fwnode_property_read_u32_array(child,
>> +                                 "ti,led-bank",
>> +                                 NULL, 0);
>> +            ret = fwnode_property_read_u32_array(child,
>> +                                 "ti,led-bank",
>> +                                 led->led_strings,
>> +                                 ret);
>> +
>> +            led->led_number = led->led_strings[0];
>> +
>> +        } else {
>> +            ret = fwnode_property_read_u32(child, "ti,led-module",
>> +                           &led_number);
>> +
>> +            led->led_number = led_number;
>> +        }
>> +        if (ret) {
>> +            dev_err(&priv->client->dev,
>> +                "led sourcing property missing\n");
>> +            fwnode_handle_put(child);
>> +            goto child_out;
>> +        }
>> +
>> +        if (led_number > priv->max_leds) {
>> +            dev_err(&priv->client->dev,
>> +                "led-sources property is invalid\n");
>> +            ret = -EINVAL;
>> +            fwnode_handle_put(child);
>> +            goto child_out;
>> +        }
>> +
>> +        ret = fwnode_property_read_string(child, "label", &name);
>> +        if (ret)
>> +            snprintf(led->label, sizeof(led->label),
>> +                "%s::", priv->client->name);
>> +        else
>> +            snprintf(led->label, sizeof(led->label),
>> +                 "%s:%s", priv->client->name, name);
>> +
>> +        fwnode_property_read_string(child, "linux,default-trigger",
>> +                    &led->led_dev.default_trigger);
>> +
>> +        led->priv = priv;
>> +        led->led_dev.name = led->label;
>> +        led->led_dev.brightness_set_blocking = lp50xx_brightness_set;
>> +        led->led_dev.brightness_get = lp50xx_brightness_get;
>> +        led->led_dev.groups = lp50xx_led_color_groups;
>> +
>> +        ret = devm_led_classdev_register(&priv->client->dev,
>> +                         &led->led_dev);
>> +        if (ret) {
>> +            dev_err(&priv->client->dev, "led register err: %d\n",
>> +                ret);
>> +            fwnode_handle_put(child);
>> +            goto child_out;
>> +        }
>> +        i++;
>> +    }
>> +    priv->num_of_leds = i;
>> +
>> +child_out:
>> +    return ret;
>> +}
>> +
>> +static int lp50xx_probe(struct i2c_client *client,
>> +            const struct i2c_device_id *id)
>> +{
>> +    struct lp50xx *led;
>> +    int count;
>> +    int ret;
>> +
>> +    count = device_get_child_node_count(&client->dev);
>> +    if (!count) {
>> +        dev_err(&client->dev, "LEDs are not defined in device tree!");
>> +        return -ENODEV;
>> +    }
>> +
>> +    led = devm_kzalloc(&client->dev, struct_size(led, leds, count),
>> +               GFP_KERNEL);
>> +    if (!led)
>> +        return -ENOMEM;
>> +
>> +    mutex_init(&led->lock);
>> +    led->client = client;
>> +    led->dev = &client->dev;
>> +    led->model_id = id->driver_data;
>> +    i2c_set_clientdata(client, led);
>> +
>> +    if (led->model_id == LP5018 || led->model_id == LP5024)
>> +        led->regmap = devm_regmap_init_i2c(client,
>> +                           &lp5024_regmap_config);
>> +    else
>> +        led->regmap = devm_regmap_init_i2c(client,
>> +                           &lp5036_regmap_config);
>> +
>> +    if (IS_ERR(led->regmap)) {
>> +        ret = PTR_ERR(led->regmap);
>> +        dev_err(&client->dev, "Failed to allocate register map: %d\n",
>> +            ret);
>> +        return ret;
>> +    }
>> +
>> +    ret = lp50xx_probe_dt(led);
>> +    if (ret)
>> +        return ret;
>> +
>> +    ret = lp50xx_init(led);
>> +    if (ret)
>> +        return ret;
>> +
>> +    return 0;
>> +}
>> +
>> +static int lp50xx_remove(struct i2c_client *client)
>> +{
>> +    struct lp50xx *led = i2c_get_clientdata(client);
>> +    int ret;
>> +
>> +    ret = regmap_update_bits(led->regmap, LP50XX_DEV_CFG0,
>> +                 LP50XX_CHIP_EN, 0);
>> +    if (ret) {
>> +        dev_err(&led->client->dev, "Failed to disable regulator\n");
>> +        return ret;
>> +    }
>> +
>> +    if (led->enable_gpio)
>> +        gpiod_direction_output(led->enable_gpio, 0);
>> +
>> +    if (led->regulator) {
>> +        ret = regulator_disable(led->regulator);
>> +        if (ret)
>> +            dev_err(&led->client->dev,
>> +                "Failed to disable regulator\n");
>> +    }
>> +
>> +    mutex_destroy(&led->lock);
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct i2c_device_id lp50xx_id[] = {
>> +    { "lp5018", LP5018 },
>> +    { "lp5024", LP5024 },
>> +    { "lp5030", LP5030 },
>> +    { "lp5036", LP5036 },
>> +    { }
>> +};
>> +MODULE_DEVICE_TABLE(i2c, lp50xx_id);
>> +
>> +static const struct of_device_id of_lp50xx_leds_match[] = {
>> +    { .compatible = "ti,lp5018", },
>> +    { .compatible = "ti,lp5024", },
>> +    { .compatible = "ti,lp5030", },
>> +    { .compatible = "ti,lp5036", },
>> +    {},
>> +};
>> +MODULE_DEVICE_TABLE(of, of_lp50xx_leds_match);
>> +
>> +static struct i2c_driver lp50xx_driver = {
>> +    .driver = {
>> +        .name    = "lp50xx",
>> +        .of_match_table = of_lp50xx_leds_match,
>> +    },
>> +    .probe        = lp50xx_probe,
>> +    .remove        = lp50xx_remove,
>> +    .id_table    = lp50xx_id,
>> +};
>> +module_i2c_driver(lp50xx_driver);
>> +
>> +MODULE_DESCRIPTION("Texas Instruments LP5024 LED driver");
>> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
>> +MODULE_LICENSE("GPL v2");
>>
>


--
------------------
Dan Murphy

\
 
 \ /
  Last update: 2019-01-24 21:33    [W:0.273 / U:3.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site