lkml.org 
[lkml]   [2019]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/2] USB: storage: don't insert sane sense for SPC3+ when bad sense specified
Date
Currently the code will set US_FL_SANE_SENSE flag unconditionally if
device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
which claims SPC4, will show strange behavior with 96-byte sense
(put the chip into a wrong state that cannot read/write anything).

Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
SPC4+ devices.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
---
Changes in v2:
- Changed the comment to note the check.

drivers/usb/storage/scsiglue.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index fde2e71a6ade..a73ea495d5a7 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -235,8 +235,12 @@ static int slave_configure(struct scsi_device *sdev)
if (!(us->fflags & US_FL_NEEDS_CAP16))
sdev->try_rc_10_first = 1;

- /* assume SPC3 or latter devices support sense size > 18 */
- if (sdev->scsi_level > SCSI_SPC_2)
+ /*
+ * assume SPC3 or latter devices support sense size > 18
+ * unless US_FL_BAD_SENSE quirk is specified.
+ */
+ if (sdev->scsi_level > SCSI_SPC_2 &&
+ !(us->fflags & US_FL_BAD_SENSE))
us->fflags |= US_FL_SANE_SENSE;

/*
--
2.18.1
\
 
 \ /
  Last update: 2019-01-03 04:27    [W:0.062 / U:6.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site