lkml.org 
[lkml]   [2019]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/2] mmc: sdhci-omap: Workaround errata regarding SDR104/HS200 tuning failures (i929)
On Wed, Jan 02, 2019 at 10:29:31AM -0800, Olof Johansson wrote:
> Hi,
>
>
> On Wed, Dec 12, 2018 at 1:20 AM Ulf Hansson <ulf.hansson@linaro.org> wrote:
> >
> > + Thermal maintainers
> >
> > On Tue, 11 Dec 2018 at 15:20, Faiz Abbas <faiz_abbas@ti.com> wrote:
> > >
> > > Errata i929 in certain OMAP5/DRA7XX/AM57XX silicon revisions
> > > (SPRZ426D - November 2014 - Revised February 2018 [1]) mentions
> > > unexpected tuning pattern errors. A small failure band may be present
> > > in the tuning range which may be missed by the current algorithm.
> > > Furthermore, the failure bands vary with temperature leading to
> > > different optimum tuning values for different temperatures.
> > >
> > > As suggested in the related Application Report (SPRACA9B - October 2017
> > > - Revised July 2018 [2]), tuning should be done in two stages.
> > > In stage 1, assign the optimum ratio in the maximum pass window for the
> > > current temperature. In stage 2, if the chosen value is close to the
> > > small failure band, move away from it in the appropriate direction.
> > >
> > > References:
> > > [1] http://www.ti.com/lit/pdf/sprz426
> > > [2] http://www.ti.com/lit/pdf/SPRACA9
> > >
> > > Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> > > Acked-by: Adrian Hunter <adrian.hunter@intel.com>
> > > ---
> > > drivers/mmc/host/Kconfig | 2 +
> > > drivers/mmc/host/sdhci-omap.c | 90 ++++++++++++++++++++++++++++++++++-
> > > 2 files changed, 91 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> > > index 5fa580cec831..d8f984483ab0 100644
> > > --- a/drivers/mmc/host/Kconfig
> > > +++ b/drivers/mmc/host/Kconfig
> > > @@ -977,6 +977,8 @@ config MMC_SDHCI_XENON
> > > config MMC_SDHCI_OMAP
> > > tristate "TI SDHCI Controller Support"
> > > depends on MMC_SDHCI_PLTFM && OF
> > > + select THERMAL
> > > + select TI_SOC_THERMAL
> > > help
> > > This selects the Secure Digital Host Controller Interface (SDHCI)
> > > support present in TI's DRA7 SOCs. The controller supports
> > > diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> > > index f588ab679cb0..b75c55011fcb 100644
> > > --- a/drivers/mmc/host/sdhci-omap.c
> > > +++ b/drivers/mmc/host/sdhci-omap.c
> > > @@ -27,6 +27,7 @@
> > > #include <linux/regulator/consumer.h>
> > > #include <linux/pinctrl/consumer.h>
> > > #include <linux/sys_soc.h>
> > > +#include <linux/thermal.h>
> > >
> > > #include "sdhci-pltfm.h"
> > >
> > > @@ -286,15 +287,19 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
> > > struct sdhci_host *host = mmc_priv(mmc);
> > > struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> > > struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
> > > + struct thermal_zone_device *thermal_dev;
> > > struct device *dev = omap_host->dev;
> > > struct mmc_ios *ios = &mmc->ios;
> > > u32 start_window = 0, max_window = 0;
> > > + bool single_point_failure = false;
> > > bool dcrc_was_enabled = false;
> > > u8 cur_match, prev_match = 0;
> > > u32 length = 0, max_len = 0;
> > > u32 phase_delay = 0;
> > > + int temperature;
> > > int ret = 0;
> > > u32 reg;
> > > + int i;
> > >
> > > /* clock tuning is not needed for upto 52MHz */
> > > if (ios->clock <= 52000000)
> > > @@ -304,6 +309,16 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
> > > if (ios->timing == MMC_TIMING_UHS_SDR50 && !(reg & CAPA2_TSDR50))
> > > return 0;
> > >
> > > + thermal_dev = thermal_zone_get_zone_by_name("cpu_thermal");
> >
> > I couldn't find a corresponding call to a put function, like
> > "thermal_zone_put()" or whatever, which made me realize that the
> > thermal zone API is incomplete. Or depending on how you put it, it
> > lacks object reference counting, unless I am missing something.
> >
> > For example, what happens if the thermal zone becomes unregistered
> > between this point and when you call thermal_zone_get_temp() a couple
> > of line below. I assume it's a known problem, but just wanted to point
> > it out.
> >

Yes, there is no ref counting. Specially because the get zones usages
were too specific, and mostly used in application cases that module
would not really be removed. Though not a good excuse, still, not very
problematic. Now, if the API is getting other usages, then refcounting
may be necessary.

> > > + if (IS_ERR(thermal_dev)) {
> > > + dev_err(dev, "Unable to get thermal zone for tuning\n");
> > > + return PTR_ERR(thermal_dev);
> > > + }
> > > +
> > > + ret = thermal_zone_get_temp(thermal_dev, &temperature);
> > > + if (ret)
> > > + return ret;
> > > +
> >
> > [...]
> >
> > Anyway, I have applied this for next, thanks!
>
> This is throwing errors on builds of keystone_defconfig in next and mainline:
>
> http://arm-soc.lixom.net/buildlogs/next/next-20190102/buildall.arm.keystone_defconfig.log.passed
>
> WARNING: unmet direct dependencies detected for TI_SOC_THERMAL
> Depends on [n]: THERMAL [=y] && (ARCH_HAS_BANDGAP [=n] ||
> COMPILE_TEST [=n]) && HAS_IOMEM [=y]
> Selected by [y]:
> - MMC_SDHCI_OMAP [=y] && MMC [=y] && MMC_SDHCI_PLTFM [=y] && OF [=y]
>
> So, thermal depends on ARCH_HAS_BANDGAP, which keystone doesn't provide.
>
> Selecting a major framework such as THERMAL from a driver config is
> likely not the right solution anyway, especially since THERMAL does
> provide stubbed out versions of the functions if it's not enabled.

Yeah, that seams a bit up-side-down. Can you guys give a bit more of
context? Why do you need the cpu thermal zone ? From patch description,
looks like you want to have your own zone then apply different tuning
values based on temperature (range?). Why do you need to mess up with
cpu_thermal zone? Don't you have a bandgap in the mem controller for
this application?

>
>
> -Olof

\
 
 \ /
  Last update: 2019-01-02 20:57    [W:0.093 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site