lkml.org 
[lkml]   [2019]   [Jan]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/8] mtd: rawnand: jz4780: Add ooblayout for the JZ4725B
On Thu, 17 Jan 2019 22:06:31 -0300
Paul Cercueil <paul@crapouillou.net> wrote:

> The boot ROM of the JZ4725B SoC expects a specific OOB layout on the
> NAND, so it makes sense to use this OOB layout unconditionally on this
> SoC.
>
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>

Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>

> ---
> drivers/mtd/nand/raw/jz4780_nand.c | 40 +++++++++++++++++++++++++++++++++++++-
> 1 file changed, 39 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mtd/nand/raw/jz4780_nand.c b/drivers/mtd/nand/raw/jz4780_nand.c
> index cf24bf12884f..073b3da5c3f7 100644
> --- a/drivers/mtd/nand/raw/jz4780_nand.c
> +++ b/drivers/mtd/nand/raw/jz4780_nand.c
> @@ -34,6 +34,7 @@ struct jz_soc_info {
> unsigned long data_offset;
> unsigned long addr_offset;
> unsigned long cmd_offset;
> + const struct mtd_ooblayout_ops *oob_layout;
> };
>
> struct jz4780_nand_cs {
> @@ -208,7 +209,7 @@ static int jz4780_nand_attach_chip(struct nand_chip *chip)
> return -EINVAL;
> }
>
> - mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
> + mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
>
> return 0;
> }
> @@ -398,16 +399,53 @@ static int jz4780_nand_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static int jz4725b_ooblayout_ecc(struct mtd_info *mtd, int section,
> + struct mtd_oob_region *oobregion)
> +{
> + struct nand_chip *chip = mtd_to_nand(mtd);
> + struct nand_ecc_ctrl *ecc = &chip->ecc;
> +
> + if (section || !ecc->total)
> + return -ERANGE;
> +
> + oobregion->length = ecc->total;
> + oobregion->offset = 3;
> +
> + return 0;
> +}
> +
> +static int jz4725b_ooblayout_free(struct mtd_info *mtd, int section,
> + struct mtd_oob_region *oobregion)
> +{
> + struct nand_chip *chip = mtd_to_nand(mtd);
> + struct nand_ecc_ctrl *ecc = &chip->ecc;
> +
> + if (section)
> + return -ERANGE;
> +
> + oobregion->length = mtd->oobsize - ecc->total - 3;
> + oobregion->offset = 3 + ecc->total;
> +
> + return 0;
> +}
> +
> +const struct mtd_ooblayout_ops jz4725b_ooblayout_ops = {
> + .ecc = jz4725b_ooblayout_ecc,
> + .free = jz4725b_ooblayout_free,
> +};
> +
> static const struct jz_soc_info jz4725b_soc_info = {
> .data_offset = 0x00000000,
> .cmd_offset = 0x00008000,
> .addr_offset = 0x00010000,
> + .oob_layout = &jz4725b_ooblayout_ops,
> };
>
> static const struct jz_soc_info jz4780_soc_info = {
> .data_offset = 0x00000000,
> .cmd_offset = 0x00400000,
> .addr_offset = 0x00800000,
> + .oob_layout = &nand_ooblayout_lp_ops,
> };
>
> static const struct of_device_id jz4780_nand_dt_match[] = {

\
 
 \ /
  Last update: 2019-01-18 09:30    [W:0.095 / U:4.656 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site