lkml.org 
[lkml]   [2019]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 6/8] mtd: rawnand: jz4780-bch: Don't set clock rate in driver
Date
This should be done in devicetree. Besides, it prevents us from
supporting other SoCs which don't use the same clock frequency for the
BCH hardware.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
drivers/mtd/nand/raw/jz4780_bch.c | 4 ----
1 file changed, 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/jz4780_bch.c b/drivers/mtd/nand/raw/jz4780_bch.c
index 7e4e5e627603..161d3821e1c4 100644
--- a/drivers/mtd/nand/raw/jz4780_bch.c
+++ b/drivers/mtd/nand/raw/jz4780_bch.c
@@ -57,8 +57,6 @@
#define BCH_BHINT_UNCOR BIT(1)
#define BCH_BHINT_ERR BIT(0)

-#define BCH_CLK_RATE (200 * 1000 * 1000)
-
/* Timeout for BCH calculation/correction. */
#define BCH_TIMEOUT_US 100000

@@ -348,8 +346,6 @@ static int jz4780_bch_probe(struct platform_device *pdev)
return PTR_ERR(bch->clk);
}

- clk_set_rate(bch->clk, BCH_CLK_RATE);
-
mutex_init(&bch->lock);

bch->dev = dev;
--
2.11.0
\
 
 \ /
  Last update: 2019-01-18 02:08    [W:0.052 / U:1.448 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site