lkml.org 
[lkml]   [2019]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/8] MIPS: DTS: CI20: Set BCH clock to 200 MHz
Date
This is currently done inside the jz4780-bch driver, but it really
should be done here instead.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
---
arch/mips/boot/dts/ingenic/ci20.dts | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
index 50cff3cbcc6d..aa892ec54d0a 100644
--- a/arch/mips/boot/dts/ingenic/ci20.dts
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -111,6 +111,9 @@
pinctrl-names = "default";
pinctrl-0 = <&pins_nemc>;

+ assigned-clocks = <&cgu JZ4780_CLK_BCH>;
+ assigned-clock-rates = <200000000>;
+
nand@1 {
reg = <1>;

--
2.11.0
\
 
 \ /
  Last update: 2019-01-18 02:07    [W:0.124 / U:5.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site