lkml.org 
[lkml]   [2019]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] media: imx: csi: Disable CSI immediately after last EOF
Hi Steve,

On Thu, Jan 17, 2019 at 6:15 PM Steve Longerbeam <slongerbeam@gmail.com> wrote:
>
> Disable the CSI immediately after receiving the last EOF before stream
> off (and thus before disabling the IDMA channel).
>
> This fixes a complete system hard lockup on the SabreAuto when streaming
> from the ADV7180, by repeatedly sending a stream off immediately followed
> by stream on:
>
> while true; do v4l2-ctl -d4 --stream-mmap --stream-count=3; done
>
> Eventually this either causes the system lockup or EOF timeouts at all
> subsequent stream on, until a system reset.
>
> The lockup occurs when disabling the IDMA channel at stream off. Disabling
> the CSI before disabling the IDMA channel appears to be a reliable fix for
> the hard lockup.
>
> Reported-by: Gaël PORTAY <gael.portay@collabora.com>
> Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>

Thanks. Since this fixes a lockup, maybe it is worth adding a Fixes
tag and Cc stable?

> ---
> drivers/staging/media/imx/imx-media-csi.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
> index e18f58f56dfb..9218372cb997 100644
> --- a/drivers/staging/media/imx/imx-media-csi.c
> +++ b/drivers/staging/media/imx/imx-media-csi.c
> @@ -681,6 +681,8 @@ static void csi_idmac_stop(struct csi_priv *priv)
> if (ret == 0)
> v4l2_warn(&priv->sd, "wait last EOF timeout\n");
>
> + ipu_csi_disable(priv->csi);
> +
> devm_free_irq(priv->dev, priv->eof_irq, priv);
> devm_free_irq(priv->dev, priv->nfb4eof_irq, priv);
>
> @@ -793,11 +795,10 @@ static void csi_stop(struct csi_priv *priv)
> /* stop the frame interval monitor */
> if (priv->fim)
> imx_media_fim_set_stream(priv->fim, NULL, false);
> + } else {
> + ipu_csi_disable(priv->csi);
> }
> -
> - ipu_csi_disable(priv->csi);
> }
> -

Unneeded line removal.

\
 
 \ /
  Last update: 2019-01-17 21:21    [W:0.037 / U:1.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site