[lkml]   [2019]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH] arm64: dts: meson: fix g12a buses
Hi Jerome,

On Wed, Jan 16, 2019 at 5:52 PM Jerome Brunet <> wrote:
> - aobus: bus@ff800000 {
> - compatible = "simple-bus";
> - reg = <0x0 0xff800000 0x0 0x100000>;
are you sure about removing aobus?
in your patch "arm64: dts: meson: g12a: add pinctrl support
controllers" from [0] you're adding back an "rti" bus at the same
memory address, except that it's size is 0x1000 instead of 0x100000

I don't have any G12A datasheet so it's hard for me to ACK / NACK this
patch, here are some clues why I'm asking:
- GXM's public datasheet lists the "RTI" region at 0xC8100000 -
0xC81FFFFF, we call it "aobus" in our .dtsi
- buildroot_openlinux_kernel_4.9_fbdev_20180706/kernel/aml-4.9/arch/arm64/boot/dts/amlogic/mesong12a.dtsi
also uses an aobus node as well as an io_aobus_base sub-node for the
codec_io node (the latter is obviously not upstream)



 \ /
  Last update: 2019-01-17 21:04    [W:0.064 / U:1.832 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site