lkml.org 
[lkml]   [2019]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 3/6] phy: qcom-qusb2: Add QUSB2 PHY support for msm8998
From
Date
On 1/17/2019 3:52 AM, Kishon Vijay Abraham I wrote:
> Hi,
>
> On 16/01/19 8:58 PM, Jeffrey Hugo wrote:
>> On 1/16/2019 1:58 AM, Kishon Vijay Abraham I wrote:
>>> Hi,
>>>
>>> On 16/01/19 2:20 PM, Kishon Vijay Abraham I wrote:
>>>>
>>>>
>>>> On 15/01/19 11:41 PM, Bjorn Andersson wrote:
>>>>> On Mon 14 Jan 08:36 PST 2019, Jeffrey Hugo wrote:
>>>>>
>>>>>> MSM8998 contains one QUSB2 PHY which is very similar to the existing
>>>>>> sdm845 support.
>>>>>>
>>>>>
>>>> I don't seem to have the dt-binding patch in my inbox. Can you send them as
>>>> well?
>>>
>>> Ignore my request. I found the patch.
>>
>> Sorry about that.  I was made aware there is something glitched when sending
>> this out, and the series didn't get threaded properly.  I'll be investigating
>> and correcting for the next time I need to send out a series.
>>
>> Is this change acceptable?  I saw you picked up patch 1 (phy bindings) and
>> patch 4 (QMP phy changes), but not this one.  I do want to see as much of this
>> hit 5.1 as possible, so if there is anything I need to correct, please let me
>> know.  I'd be happy to update.
>
> I've updated the tree now. Can you check if everything looks alright w.r.t your
> patches?

Looks great. Thank you very much for taking all the phy changes.

>
> Thanks
> Kishon
>>
>>>
>>> Thanks
>>> Kishon
>>>
>>>>
>>>> Thanks
>>>> Kishon
>>>>> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
>>>>>
>>>>>> Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
>>>>>> ---
>>>>>>   drivers/phy/qualcomm/phy-qcom-qusb2.c | 41
>>>>>> +++++++++++++++++++++++++++++++++++
>>>>>>   1 file changed, 41 insertions(+)
>>>>>>
>>>>>> diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c
>>>>>> b/drivers/phy/qualcomm/phy-qcom-qusb2.c
>>>>>> index 9177989f..e5e4f36 100644
>>>>>> --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
>>>>>> +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
>>>>>> @@ -152,6 +152,32 @@ enum qusb2phy_reg_layout {
>>>>>>       QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
>>>>>>   };
>>>>>>   +static const unsigned int msm8998_regs_layout[] = {
>>>>>> +    [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
>>>>>> +    [QUSB2PHY_PLL_STATUS]              = 0x1a0,
>>>>>> +    [QUSB2PHY_PORT_TUNE1]              = 0x23c,
>>>>>> +    [QUSB2PHY_PORT_TUNE2]              = 0x240,
>>>>>> +    [QUSB2PHY_PORT_TUNE3]              = 0x244,
>>>>>> +    [QUSB2PHY_PORT_TUNE4]              = 0x248,
>>>>>> +    [QUSB2PHY_PORT_TEST1]              = 0x24c,
>>>>>> +    [QUSB2PHY_PORT_TEST2]              = 0x250,
>>>>>> +    [QUSB2PHY_PORT_POWERDOWN]          = 0x210,
>>>>>> +    [QUSB2PHY_INTR_CTRL]               = 0x22c,
>>>>>> +};
>>>>>> +
>>>>>> +static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
>>>>>> +    QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x13),
>>>>>> +    QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
>>>>>> +    QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
>>>>>> +    QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
>>>>>> +
>>>>>> +    QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xa5),
>>>>>> +    QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x09),
>>>>>> +
>>>>>> +    QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
>>>>>> +};
>>>>>> +
>>>>>> +
>>>>>>   static const unsigned int sdm845_regs_layout[] = {
>>>>>>       [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
>>>>>>       [QUSB2PHY_PLL_STATUS]        = 0x1a0,
>>>>>> @@ -221,6 +247,18 @@ struct qusb2_phy_cfg {
>>>>>>       .autoresume_en     = BIT(3),
>>>>>>   };
>>>>>>   +static const struct qusb2_phy_cfg msm8998_phy_cfg = {
>>>>>> +    .tbl            = msm8998_init_tbl,
>>>>>> +    .tbl_num        = ARRAY_SIZE(msm8998_init_tbl),
>>>>>> +    .regs           = msm8998_regs_layout,
>>>>>> +
>>>>>> +    .disable_ctrl   = POWER_DOWN,
>>>>>> +    .mask_core_ready = CORE_READY_STATUS,
>>>>>> +    .has_pll_override = true,
>>>>>> +    .autoresume_en   = BIT(0),
>>>>>> +    .update_tune1_with_efuse = true,
>>>>>> +};
>>>>>> +
>>>>>>   static const struct qusb2_phy_cfg sdm845_phy_cfg = {
>>>>>>       .tbl        = sdm845_init_tbl,
>>>>>>       .tbl_num    = ARRAY_SIZE(sdm845_init_tbl),
>>>>>> @@ -734,6 +772,9 @@ static int qusb2_phy_exit(struct phy *phy)
>>>>>>           .compatible    = "qcom,msm8996-qusb2-phy",
>>>>>>           .data        = &msm8996_phy_cfg,
>>>>>>       }, {
>>>>>> +        .compatible    = "qcom,msm8998-qusb2-phy",
>>>>>> +        .data        = &msm8998_phy_cfg,
>>>>>> +    }, {
>>>>>>           .compatible    = "qcom,sdm845-qusb2-phy",
>>>>>>           .data        = &sdm845_phy_cfg,
>>>>>>       },
>>>>>> --
>>>>>> Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies,
>>>>>> Inc.
>>>>>> Qualcomm Technologies, Inc. is a member of the
>>>>>> Code Aurora Forum, a Linux Foundation Collaborative Project.
>>>>>>
>>
>>


--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.

\
 
 \ /
  Last update: 2019-01-17 18:58    [W:0.070 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site