lkml.org 
[lkml]   [2019]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 2/3] dt-bindings: reset: imx7: Document usage on i.MX8MQ SoCs
From
Date
Hi Andrey,

sorry for the delay. Thank you for the update, apart from the comments
below, the list now looks to be complete.

On Wed, 2018-12-19 at 17:06 -0800, Andrey Smirnov wrote:
> The driver now supports i.MX8MQ, so update bindings accordingly.
>
> Cc: p.zabel@pengutronix.de
> Cc: Fabio Estevam <fabio.estevam@nxp.com>
> Cc: cphealy@gmail.com
> Cc: l.stach@pengutronix.de
> Cc: Leonard Crestez <leonard.crestez@nxp.com>
> Cc: "A.s. Dong" <aisheng.dong@nxp.com>
> Cc: Richard Zhu <hongxing.zhu@nxp.com>
> Cc: linux-imx@nxp.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> .../bindings/reset/fsl,imx7-src.txt | 7 +-
> include/dt-bindings/reset/imx8mq-reset.h | 64 +++++++++++++++++++
> 2 files changed, 69 insertions(+), 2 deletions(-)
> create mode 100644 include/dt-bindings/reset/imx8mq-reset.h
>
> diff --git a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> index 1ab1d109318e..2ecf33815d18 100644
> --- a/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> +++ b/Documentation/devicetree/bindings/reset/fsl,imx7-src.txt
> @@ -5,7 +5,9 @@ Please also refer to reset.txt in this directory for common reset
> controller binding usage.
>
> Required properties:
> -- compatible: Should be "fsl,imx7d-src", "syscon"
> +- compatible:
> + - For i.MX7 SoCs should be "fsl,imx7d-src", "syscon"
> + - For i.MX8MQ SoCs should be "fsl,imx8mq-src", "syscon"
> - reg: should be register base and length as documented in the
> datasheet
> - interrupts: Should contain SRC interrupt
> @@ -44,4 +46,5 @@ Example:
>
>
> For list of all valid reset indicies see
> -<dt-bindings/reset/imx7-reset.h>
> +<dt-bindings/reset/imx7-reset.h> for i.MX7 and
> +<dt-bindings/reset/imx8mq-reset.h> for i.MX8MQ
> diff --git a/include/dt-bindings/reset/imx8mq-reset.h b/include/dt-bindings/reset/imx8mq-reset.h
> new file mode 100644
> index 000000000000..57c592498aa0
> --- /dev/null
> +++ b/include/dt-bindings/reset/imx8mq-reset.h
> @@ -0,0 +1,64 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2018 Zodiac Inflight Innovations
> + *
> + * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
> + */
> +
> +#ifndef DT_BINDING_RESET_IMX8MQ_H
> +#define DT_BINDING_RESET_IMX8MQ_H
> +
> +#define IMX8MQ_RESET_A53_CORE_POR_RESET0 0
> +#define IMX8MQ_RESET_A53_CORE_POR_RESET1 1
> +#define IMX8MQ_RESET_A53_CORE_POR_RESET2 2
> +#define IMX8MQ_RESET_A53_CORE_POR_RESET3 3
> +#define IMX8MQ_RESET_A53_CORE_RESET0 4
> +#define IMX8MQ_RESET_A53_CORE_RESET1 5
> +#define IMX8MQ_RESET_A53_CORE_RESET2 6
> +#define IMX8MQ_RESET_A53_CORE_RESET3 7
> +#define IMX8MQ_RESET_A53_DBG_RESET0 8
> +#define IMX8MQ_RESET_A53_DBG_RESET1 9
> +#define IMX8MQ_RESET_A53_DBG_RESET2 10
> +#define IMX8MQ_RESET_A53_DBG_RESET3 11
> +#define IMX8MQ_RESET_A53_ETM_RESET0 12
> +#define IMX8MQ_RESET_A53_ETM_RESET1 13
> +#define IMX8MQ_RESET_A53_ETM_RESET2 14
> +#define IMX8MQ_RESET_A53_ETM_RESET3 15
> +#define IMX8MQ_RESET_A53_SOC_DBG_RESET 16
> +#define IMX8MQ_RESET_A53_L2RESET 17
> +#define IMX8MQ_RESET_SW_NON_SCLR_M4C_RST 18
^^^^^^^^

This might be an implementation detail. The reset line is
(SW_?)M4C_RST. I suppose the self-clearing SW_M4C_RST bit could be used
to implement .reset() functionality for the same line if needed.

What about the self-clearing SW_M4P_RST bit? Has that been left out on
purpose?

> +#define IMX8MQ_RESET_OTG1_PHY_RESET 19
> +#define IMX8MQ_RESET_OTG2_PHY_RESET 20
> +#define IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N 21
> +#define IMX8MQ_RESET_MIPI_DSI_RESET_N 22
> +#define IMX8MQ_RESET_MIPI_DIS_DPI_RESET_N 23
> +#define IMX8MQ_RESET_MIPI_DIS_ESC_RESET_N 24
> +#define IMX8MQ_RESET_MIPI_DIS_PCLK_RESET_N 25
> +#define IMX8MQ_RESET_PCIEPHY 26
> +#define IMX8MQ_RESET_PCIEPHY_PERST 27
> +#define IMX8MQ_RESET_PCIE_CTRL_APPS_EN 28
> +#define IMX8MQ_RESET_PCIE_CTRL_APPS_TURNOFF 29

To be honest, I don't like these two, I'm not convinced anymore that
they actually qualify as reset signals. To me it looks like this is
something that the PCIe glue code should handle via syscon like i.MX6.
Leonard, Lucas, what do you think?

> +#define IMX8MQ_RESET_HDMI_PHY_APB_RESET 30
> +#define IMX8MQ_RESET_DISP_RESET 31
> +#define IMX8MQ_RESET_GPU_RESET 32
> +#define IMX8MQ_RESET_VPU_RESET 33
> +#define IMX8MQ_RESET_PCIEPHY2 34
> +#define IMX8MQ_RESET_PCIEPHY2_PERST 35
> +#define IMX8MQ_RESET_PCIE2_CTRL_APPS_EN 36
> +#define IMX8MQ_RESET_PCIE2_CTRL_APPS_TURNOFF 37

Same issue as PCIe #1

> +#define IMX8MQ_RESET_MIPI_CSI1_CORE_RESET 38
> +#define IMX8MQ_RESET_MIPI_CSI1_PHY_REF_RESET 39
> +#define IMX8MQ_RESET_MIPI_CSI1_ESC_RESET 40
> +#define IMX8MQ_RESET_MIPI_CSI2_CORE_RESET 41
> +#define IMX8MQ_RESET_MIPI_CSI2_PHY_REF_RESET 42
> +#define IMX8MQ_RESET_MIPI_CSI2_ESC_RESET 43
> +#define IMX8MQ_RESET_DDRC1_PRST 44
> +#define IMX8MQ_RESET_DDRC1_CORE_RESET 45
> +#define IMX8MQ_RESET_DDRC1_PHY_RESET 46

Does anybody know what the DDRC1_PHY_PWROKIN bit is, right next to the
PHY reset?

> +#define IMX8MQ_RESET_DDRC2_PRST 47
> +#define IMX8MQ_RESET_DDRC2_CORE_RESET 48
> +#define IMX8MQ_RESET_DDRC2_PHY_RESET 49
> +
> +#define IMX8MQ_RESET_NUM 50
> +
> +#endif

regards
Philipp

\
 
 \ /
  Last update: 2019-01-17 17:46    [W:0.084 / U:3.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site